Requirements for Completion Sample Clauses

Requirements for Completion. Completion is when the Contractor has done all the work, which the Works Information states he is to do by the Completion Date and has corrected notified Defects, which would have prevented the Employer from using the works. The Site is handed back to the Employer in a condition acceptable to the Service Manager.
AutoNDA by SimpleDocs
Requirements for Completion. 4A shall promptly notify Owner of any additional requirements necessary to facilitate each project’s completion (i.e. -If trenching is included: Excavation of rock harder than “highly weathered"). Any subsequent amendment, modification or agreement, which operates to alter this Contract, and which is signed by 4A and Owner, shall be deemed a part of this Contract and shall be controlling in case of conflict, to the extent that it alters this Contract. CORRECTIVE WORK: 4A will perform minor corrective or repair work that may remain to be finished after each project completion. Owner shall not withhold any payment pending completion of such work. If major corrective or repair work remains to be finished after each project is completed and the cost exceeds one (1) percent of the gross Contract price, the Owner may withhold payment sufficient to pay for completion of the work, pending completion of the work, but may not withhold an amount which is greater. ITEMS NOT RESPONSIBILITY OF 4A: Owner represents that the property being improved does not contain hazardous materials. 4A shall not be held responsible for any existing violations of applicable building regulations or ordinances. Correction of such violations or abnormal conditions by 4A shall be considered additional work and shall be treated as “Extra Work”. 4A agrees to start and diligently pursue work through to completion, but shall not be responsible for delays for any of the following reasons; failure of the issuance of all necessary building permits within a reasonable length of time, acts of neglect or omission of Owner, Owner’s employees or Owner’s agent, acts of God, stormy or inclement weather, labor union activities, extra work ordered by Owner, acts of public enemy, riots or civil commotion, inability to secure material through regular recognized channels, imposition of Government priority or allocation of materials, failure of Owner to make payments when due, delays caused by inspection or changes ordered by the inspectors of authorized governmental bodies, acts of independent contractors, holidays or other causes beyond 4A’s reasonable control.
Requirements for Completion. Hours A total of 110 hours completed over 25 weeks are required to complete our Internship. This means that you should strive to complete 5 hours per week. Some flexibility may be possible, but this must be determined on an individual basis with your supervisor upon submission of this contract. If at any time during your term you foresee an issue in meeting this requirement, you must immediately discuss this with your supervisor. Your hours must be recorded on the Intern Time Tracking Log provided. Note that time is cumulative, so you may roll over extra hours from week to week.
Requirements for Completion. Matriculating students must satisfy SPC's requirements for the Bachelor's in Applied Science in Health Services Administration for Respiratory Care. These requirements for graduation and completion are as fo11ows:
Requirements for Completion. Students must successfully fulfill program objectives, meet course requirements of 75% or higher, finished 1500 hours of education, and receive a certificate are eligible* to submit an application to take the National Council Licensing Examination for Practical Nurses. *Excerpts from the Pennsylvania Nurse Practice Act for Practical Nurses: (Act 110): "The State Board shall not issue a license or certificate to an applicant who has been convicted of a felonious act prohibited by the Controlled Substance, Drug, Device and Cosmetic Act, or convicted of a felony relating to a controlled substance in court of law of the United States or any other State, Territory, or Country unless: (1) at least ten years have elapsed since the date of conviction; (2) the applicant satisfactorily demonstrates significant progress in rehabilitation since the conviction and the licensure of the applicant should not be expected to create a substantial risk of harm to the health and safety of patients or the public; (3) the applicant otherwise satisfies the qualifications contained in or authorized by the act. (Convicted shall include a judgment, an admission of guilt or a plea of Nolo Contendere.)" Conviction of a misdemeanor/felony may also result in denial of licensure.
Requirements for Completion. ESKOM HOLDINGS SOC LTD CONTRACT NUMBER MAINTENANCE AND REPAIRS OF FIRE DETECTION SYSTEM AT TUTUKA POWER STATION FOR A PERIOD OF 5 YEARS Completion is when the contractor has done all the work, which the Works Information states he is to do by the Completion Date and has corrected notified Defects, which would have prevented the Employer from using the works. The Site is handed back to the Employer in a condition acceptable to the Service Manager.

Related to Requirements for Completion

  • Time for Completion The Contractor shall deliver the material and/or services called for in the specifications/proposal and within the delivery time specified and in accordance with the terms of the contract. Work shall be completed within 30 days from the Notice to Proceed issued by the City of Sparks Purchasing Division. The Contractor shall not alter or vary any terms or conditions contained or incorporated herein, including but not limited to, the quantity, price, delivery date or date designated as After Receipt of Order (ARO) or date for commencement or completion of services as mutually agreed upon, unless such alteration or variation is consented to in writing by a duly authorized representative of the City. The City reserves the right to cancel resultant Contract upon ten days written notice in the event the type and quality of the product or work performance is unsatisfactory or in default, subject to Contractor’s right to cure as outlined in termination clause. This is a non-exclusive Contract and the City reserves the right to acquire the material and/or services at its discretion, from other sources during the term of this Contract.

  • Date for Completion 4.1 Completion must take place in Canberra on the Date for Completion or as otherwise determined by the Contract and if not specified or determined, within a reasonable time.

  • Time for Compliance Consultant shall not commence work under this Agreement until it has provided evidence satisfactory to the City that it has secured all insurance required under this section. In addition, Consultant shall not allow any subconsultant to commence work on any subcontract until it has provided evidence satisfactory to the City that the subconsultant has secured all insurance required under this section. Failure to provide and maintain all required insurance shall be grounds for the City to terminate this Agreement for cause.

  • Project Requirements Failure to comply with the following requirements will result in a suspension of all other operations:

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Procurement Requirements The below listed provisions of State Procurement requirements shall be complied with throughout the contract period:

  • Certain State Law Requirements for Contracts The contents of this Section are required by Texas Law and are included by County regardless of content.

  • INSTRUCTIONS FOR COMPLETING FORM A AND B Form A and Form B should be completed for Contracts for consulting services in accordance with Section XI.18.C of the Office of the State Comptroller’s Guide to Financial Operations (xxxx://xxx.xxx.xxxxx.xx.xx/agencies/guide/MyWebHelp/), “Consultant Disclosure Legislation,” and the following:

  • Development Requirements The exterior wall standards set forth in this section shall apply to the structures located on the Property. At least ninety percent (90%) of the combined exterior surface area of all walls, including all stories of buildings / structures, shall consist of stone, brick, painted or tinted stucco, and factory tinted (not painted) split faced concrete masonry unit or similar material approved by the Director of Planning.

  • Contractor Compliance Contractor represents and warrants to pay, at its sole expense, for all applicable permits, licenses, tariffs, tolls and fees to give all notices and comply with all laws, ordinances, rules and regulations of any governmental entity in conjunction with the performance of obligations under the Contract. Prior to award and during the Contract term and any renewals thereof, Contractor must establish to the satisfaction of the Commissioner that it meets or exceeds all requirements of the Bid/Contract and any applicable laws, including but not limited to, permits, insurance coverage, licensing, proof of coverage for worker’s compensation, and shall provide such proof as required by the Commissioner. Failure to do so may constitute grounds for the Commissioner to cancel or suspend this Contract, in whole or in part, or to take any other action deemed necessary by the Commissioner.

Time is Money Join Law Insider Premium to draft better contracts faster.