SUPPORT AND TRAINING COMMITMENT Sample Clauses

SUPPORT AND TRAINING COMMITMENT. The Company hereby grants Distributor the right and confers upon Distributor the obligation to pass through to the end-user the warranty established by the Company for the Products. The Company reserves the right to modify the form of Product warranty from time to time upon written notice to Distributor. Distributor shall provide all Subdistributor and end-user support, as well as Subdistributor training, for the Products which Distributor distributes. The Company shall provide limited engineering support directly to Distributor for those issues which Distributor cannot, after reasonable efforts, manage through its own engineering efforts. Notwithstanding anything set forth herein, Distributor shall encourage all end-user customers to bring their claims for Product support and warranty to the relevant Subdistributor, and shall instruct all Subdistributors to bring their claims for Product support and warranty to Distributor.
AutoNDA by SimpleDocs
SUPPORT AND TRAINING COMMITMENT. The Company hereby grants Licensee the right and confers upon Licensee the obligation to pass through to the end-user the warranty established by the Company for the Products. The Company reserves the right to modify the form of Product warranty from time to time upon written notice to Licensee. Licensee shall warrant the media upon which the Product resides in accordance with the Company's media warranty policy for licensees. Licensee shall provide all Subdistributor and end-user support, as well as Subdistributor training, for the Products which Licensee distributes, except for modifications and corrections to errors in the software code which cause a Product to cease functioning substantially in accordance with its specifications, if any, as set forth in the Documentation, which modifications and corrections shall be performed only by the Company. Notwithstanding anything set forth herein, Licensee shall encourage all end-user customers to bring their claims for Product support and warranty to the relevant Subdistributor, and shall instruct all Subdistributors to bring their claims for Product support and warranty to Licensee. To assist Licensee perform its support obligations set forth in this Section 3.2, the Company hereby grants Licensee a non-exclusive, nontransferable right and license to use internally the source code for the Products, if delivered by the Company, only for the purpose of providing customer support and maintenance. Licensee shall NOT have the right to: (i) make copies of Product source code; (ii) make modifications to the Product source code; or (iii) distribute, sell, assign, license, convey, disclose or transfer any or all of the Product source code.

Related to SUPPORT AND TRAINING COMMITMENT

  • Customer Support and Training System Agency will provide support for the CMBHS, including problem tracking and problem resolution. System Agency will provide telephone numbers for Grantees to obtain access to expert assistance for CMBHS-related problem resolution. System Agency will provide initial CMBHS training. Grantee shall provide subsequent ongoing end-user training.

  • Support and Services ISD and HC agree to the following conditions: A. HC agrees to the following for both the mathematics and English language arts courses: i. To share data and provide feedback regarding student success on entry‐level college mathematics and English language arts courses; ii. To train advisors to recognize and honor course(s) on school district transcripts; iii. To ensure that eligible students are counseled directly into college level mathematics, English language arts, and all other courses that require mathematics and English language arts college readiness; B. HC agrees to the following for the college preparatory mathematics courses: i. To provide the Student Learning Outcomes; ii. To provide the syllabi for the courses being offered. iii. To provide regular meetings between the HC faculty and ISD faculty teaching the course. C. HC agrees to the following for the college preparatory English language arts course: i. To provide the Student Learning Outcomes for Integrated Reading/Writing (INRW 0303) course; ii. To provide the syllabi, including types of essays required (i.e., expository, persuasive, and critical analysis). iii. To provide regular meetings between the HC faculty and ISD faculty teaching the course. D. ISD agrees to the following for both the mathematics and English language arts courses: i. To provide highly qualified instructors for the courses being taught; ii. To identify students who are not college ready as stated in HB 5; iii. To provide professional development and resources required to teach the mathematics and English language arts courses; iv. To identify successful completion of the course(s) on the student transcripts as determined by the State of Texas PEIMS number; v. To provide curriculum for the course that is consistent with HC Student Learning Outcomes; vi. To provide assistance with admission, enrollment, and financial aid applications; E. ISD agrees to the following for the college preparatory mathematics course: i. To teach a math course designed to focus on college mathematics (algebraic or non‐algebraic) concepts; ii. Require students to meet college readiness scores on the TSI Assessment; iii. To meet regularly with HC faculty. F. ISD agrees to the following for the college preparatory English language arts course: i. To teach an integrated Reading and Writing course that focuses on critical reading and college‐level writing; ii. Require students to meet college readiness scores on the TSI Assessment; iii. To meet regularly with HC faculty.

  • EMPLOYEE DEVELOPMENT AND TRAINING 1. The State agrees to provide advice and counseling to employees with respect to career advancement opportunities and agency developments which have an impact on their careers. 2. Regular review of its job-related and career development and training programs will be made by the State in order to provide suitable programs for employees covered by this Agreement. When undertaking any such review, the State shall notify employees of such review and take into account suggestions and proposals made by employees. 3. Employees shall be given a reasonable notice of applicable, development and training programs available. Such notice shall include an explanation of the procedure for applying for the program. Notices of development and training programs shall be posted for reasonable periods in advance on bulletin boards at applicable work locations within the agencies involved. An appointing authority shall make every effort to permit employees' participation in such career development and training programs. Participation in any training inside or outside of work hours which is required by the State as a condition of fulfilling the requirements of the employee's job, or any in-service State training which is conducted or undertaken during normally scheduled work hours will be considered as time worked. 4. The State shall pay tuition, course-related fees, other approved course required costs and for necessary travel and lodging pursuant to established policies and procedures.

  • Course Curriculum, Instruction, and Grading X. Xxxx College courses offered as dual credit, regardless of where they are taught, follow the same syllabus, course outline, textbook, grading method, and other academic policies as the courses outlined in the Hill College catalog. B. Approved courses being taught for dual credit must follow the approved master syllabus of the discipline and of Hill College. C. Textbooks should be identical to those approved for use by Hill College. Should an instructor propose an alternative textbook, the textbook must be approved in advance by the appropriate instructional department of Hill College and the Vice President of Instruction. Other instructional materials for dual credit/concurrent courses must be identical or at an equivalent level to materials used by Hill College. D. Courses which result in college‐level credit will follow the standard grading practices of Hill College, as identified by college policy and as identified in the appropriately approved course syllabus. The grades used in college records are A (excellent), B (above average), C (average), D (below average), F (failure), I (incomplete), W (withdrawn), WC (withdrawn COVID). The lowest passing grade is D. Grade point averages are computed by assigning values to each grade as follows: A = 4 points, B = 3 points, C = 2 points, D = 1 point, and F = 0 points. Grading criteria may be devised by Hill College and the ISD to allow faculty the opportunity to award high school credit only or high school and college credit depending upon student performance. E. Faculty, who are responsible for teaching dual credit/concurrent classes, are responsible for keeping appropriate records, certifying census date rosters, providing interim grade reports, certifying final grade reports at the end of the semester, certifying attendance, and providing other reports and information as may be required by Hill College and/or the School District.

  • Customer Support and Closing A. Agent shall provide support to Referred Client in their evaluation and negotiation for the purchase or sale of real estate in addition to the following duties: i. Provide Referred Client with qualified local vendor sources to facilitate the sale; ii. Assist Referred Client throughout the transaction, acting within applicable standards of care at all times; iii. Use professional knowledge and skills to negotiate for Referred Client purchase or sale of property; iv. Agent agrees to at all times fully comply with all laws, statutes, ordinances, rules, regulations, and orders applicable to this Agreement. B. Agent shall provide XXXX.xxx with the contact information for the Title Officer, Xxxxxx Officer and/or Closing Agent within 48 hours of an offer being accepted. Agent shall deliver this information via email to xxxxxxxxxxxx@xxxx.xxx RECIPIENT BROKER: XXXX.XXX: C. Agent shall deliver or coordinate with the Title, Escrow or Closing Agent to deliver to XXXX.xxx a copy of the Closing Statement within 48 hours of Closing. Agent will confirm Closing and coordinate the payment of Referral Fees to XXXX.xxx by the Closing Agent at Closing. Closing updates shall be reported by Agent to XXXX.xxx via email to xxxxxxxxxxxx@xxxx.xxx.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

  • First Aid Training In the interests of the occupational safety and health of employees, the Employer will undertake an in-service program of first aid training aimed at providing a first aid officer for each department.

  • Flexible Working Arrangements In accordance with the Employment Relations Act 2000, an employee affected by family violence may request a short-term (two months or less) variation of their employment arrangements to assist the employee to deal with the effects of family violence.

  • Change Orders and Contract Amendments 33.1 The Procuring Entity may at any time order the Supplier through notice in accordance GCC Clause 8, to make changes within the general scope of the Contract in any one or more of the following: a) drawings, designs, or specifications, where Goods to be furnished under the Contract are to be specifically manufactured for the Procuring Entity; b) the method of shipment or packing; c) the place of delivery; and d) the Related Services to be provided by the Supplier. 33.2 If any such change causes an increase or decrease in the cost of, or the time required for, the Supplier's performance of any provisions under the Contract, an equitable adjustment shall be made in the Contract Price or in the Delivery/Completion Schedule, or both, and the Contract shall accordingly be amended. Any claims by the Supplier for adjustment under this Clause must be asserted within twenty-eight (28) days from the date of the Supplier's receipt of the Procuring Entity's change order. 33.3 Prices to be charged by the Supplier for any Related Services that might be needed but which were not included in the Contract shall be agreed upon in advance by the parties and shall not exceed the prevailing rates charged to other parties by the Supplier for similar services.

  • Professional Development and Training The Company shall pay for or reimburse the Executive for any reasonable professional development or training.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!