Topographic Surveying Services Sample Clauses

Topographic Surveying Services. Research subdivision plats, rights-of-way, easements and other available survey elements, which may affect the physical boundaries of the project; All the easements with volume and page numbers shall be identified and labeled on the survey submittal; Research Fort Bend County Official Records for current deeds and plats for property affected by the Project; Research County records and public utilities record for existing documents of utilities; Office calculations necessary to check location of the right-of-way line in relation to features found during the course of the topographic survey; Establish horizontal and vertical survey control points at spacing of approximately 1,000 feet along the pavement reconstruction alignment; Reference all survey work to state plan coordinate system and to current Fort Bend County elevation control; Prepare survey control data strip map of existing and proposed right-of-way alignment for horizontal and vertical control points; Provide 11” x 17” pdfs of survey control map and control sketches; Identify roadways, driveways, alleys and sidewalks with pavement type; Show centerlines and angles of intersection of the side street(s) with main roadway centerline, as necessary; Show all mailboxes, road signs and signal posts; Locate and describe any trees, bushes or other landscaping plants; Provide tree caliper, type of tree, and drip line location for all trees over 2 inches in diameter; Provide topographic survey of outfall drainage ditch between Xxx 0 xxx 0 xx Xxx Xxxxxxx xx Koeblen Road from existing Koeblen Road to Dry Creek and a second outfall drainage easement to Dry Creek to be determined by project engineer; provide topographic survey for two detention ponds to be determined by the project area; Obtain three cross sections of Dry Creek at various locations established by the design engineer; Show all visible utilities found during the course of obtaining field work; Show on plan view drawings, all underground utilities and utilities within the Project limits from as-built drawings; Show building structures within 50’ of road right-of-way; Locate vegetation lines and special landscaping; Survey boring logs and obtain surface elevation; Topographic work will extend 30’ beyond the right-of-way; and Deliver files in Civil 3D 2018; Provide a plan view strip map of topographic survey with appropriate labels.
AutoNDA by SimpleDocs
Topographic Surveying Services. 301. Control Survey. Provide horizontal and vertical survey control necessary to accomplish the topographic mapping for the PROJECT. 302. Design Survey. Obtain measurements locating physical features over and adjacent to the PROJECT including: (1) center of crown and edge of pavement locations on 50-foot intervals and at grade breaks;
Topographic Surveying Services. The CONSULTANT will provide the services of a licensed surveyor for the preparation of the survey for the proposed activities at the Springtree WTP site. The following is included in this survey scope of work: Topographic survey will be needed for the LS1 and LS2 locations, Dewatering Building truck loading area, large sludge drying pit area, the auxiliary sludge drying area and the auxiliary lagoon. Existing survey does not reflect the current condition of the large sludge drying pit area, the auxiliary sludge drying area and the auxiliary lagoon. The survey will be based on the following requirements: • Electronic CAD file(s) in AutoCAD 2020 Civil 3D format depicting the Topographic Survey. • Horizontal Datum to be relative to the Florida State Plane Coordinate System, West Zone, North American Datum of 1983 (2011 adjustment). • Vertical Datum to be relative to the North American Vertical Datum of 1988. • Depict the ground surface elevation in sufficient detail to define the elevation cross section over the width of the survey limits at maximum 20-foot intervals. Obtain the elevation at all abrupt changes of grade, ditch centerlines, and inverts of culvert pipes, inlets, and manholes (wherever accessible). Elevation data points will be shown on the survey drawing and labeled. • Survey existing LS1 and LS2 wet well information including influent pipe invert, rim elevation, diameter, bottom elevation, and size of discharge force main.
Topographic Surveying Services. The Consultant will prepare a suitable base drawing in CAD format from existing airport documentation and the following topographic survey services: Contingency Services (Fees broken out as separate line items):

Related to Topographic Surveying Services

  • Engineering Services Definition: Engineering Services includes any service or creative work, the adequate performance of which requires education, training and experience in the application of special knowledge in consulting, investigating, evaluating, planning and designing, engineering principles. Engineering Services covered by the Xxxxxx Architect-Engineers Act (40 U.S.C. 1102) are not covered in the primary scope of OASIS SB. Examples: Service areas that are included under the Engineering Services discipline include, but are not limited to the following: 1. Systems Engineering 2. Advanced Technology Pilots and Trials 3. Alternative Energy Sources and Engineering 4. Configuration Management 5. Concept Development

  • Training Services Training Services may include pre-packaged training Products, and/or the development or customization of training programs as requested, including Live Training, Computer Based/Multi-Media Training which encompasses Internet-Delivered Training, and/or Video Based Training.

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. (a) A7 to show Purchaser’s performance responsibility. (b) The Schedule of Items to include costs of survey and design, as provided under B5.24, and adjust Timber Sale Account, as provided in B5.

  • SERVICE MONITORING, ANALYSES AND ORACLE SOFTWARE 11.1 We continuously monitor the Services to facilitate Oracle’s operation of the Services; to help resolve Your service requests; to detect and address threats to the functionality, security, integrity, and availability of the Services as well as any content, data, or applications in the Services; and to detect and address illegal acts or violations of the Acceptable Use Policy. Oracle monitoring tools do not collect or store any of Your Content residing in the Services, except as needed for such purposes. Oracle does not monitor, and does not address issues with, non-Oracle software provided by You or any of Your Users that is stored in, or run on or through, the Services. Information collected by Oracle monitoring tools (excluding Your Content) may also be used to assist in managing Oracle’s product and service portfolio, to help Oracle address deficiencies in its product and service offerings, and for license management purposes. 11.2 We may (i) compile statistical and other information related to the performance, operation and use of the Services, and (ii) use data from the Services in aggregated form for security and operations management, to create statistical analyses, and for research and development purposes (clauses i and ii are collectively referred to as “Service Analyses”). We may make Service Analyses publicly available; however, Service Analyses will not incorporate Your Content, Personal Data or Confidential Information in a form that could serve to identify You or any individual. We retain all intellectual property rights in Service Analyses. 11.3 We may provide You with the ability to obtain certain Oracle Software (as defined below) for use with the Services. If we provide Oracle Software to You and do not specify separate terms for such software, then such Oracle Software is provided as part of the Services and You have the non-exclusive, worldwide, limited right to use such Oracle Software, subject to the terms of this Agreement and Your order (except for separately licensed elements of the Oracle Software, which separately licensed elements are governed by the applicable separate terms), solely to facilitate Your use of the Services. You may allow Your Users to use the Oracle Software for this purpose, and You are responsible for their compliance with the license terms. Your right to use any Oracle Software will terminate upon the earlier of our notice (by web posting or otherwise) or the end of the Services associated with the Oracle Software. Notwithstanding the foregoing, if Oracle Software is licensed to You under separate terms, then Your use of such software is governed by the separate terms. Your right to use any part of the Oracle Software that is licensed under the separate terms is not restricted in any way by this Agreement.

  • Building Services 7.01 Landlord shall furnish Tenant with the following services: (a) hot and cold water for use in the Base Building lavatories and drinking purposes; (b) customary heat and air conditioning in season during Building Service Hours (, although (i) Tenant shall have the right to receive HVAC service during hours other than Building Service Hours by paying Landlord’s then standard charge for additional HVAC service and providing such prior notice as is reasonably specified by Landlord (Landlord’s current charge for afterhours HVAC is $60 per hour, subject to change by Landlord from time to time), and (ii) if Tenant is permitted to connect any supplemental HVAC units to the Building’s condenser water loop or chilled water line, such permission shall be conditioned upon Landlord having adequate excess capacity from time to time and such connection and use shall be subject to Landlord’s reasonable approval and reasonable restrictions imposed by Landlord, and Landlord shall have the right to charge Tenant a connection fee and/or a monthly usage fee, as reasonably determined by Landlord; (c) standard janitorial service on Business Days; (d) unattended elevator service; (e) electricity in accordance with the terms and conditions in Section 7.02; (f) access to the Building for Tenant and its employees 24 hours per day/7 days per week, subject to the terms of this Lease and such protective services or monitoring systems, if any, as Landlord may reasonably impose, including, without limitation, sign-in procedures and/or presentation of identification cards; and (g) subject to Section 26.10, such other services as Landlord reasonably determines are necessary or appropriate for the Property. If Landlord, at Tenant’s request, provides any services which are not Landlord’s express obligation under this Lease, including, without limitation, any repairs which are Tenant’s responsibility pursuant to Section 9 below, Tenant shall pay Landlord, or such other party designated by Landlord, the cost of providing such service plus an administrative charge of ten percent (10%), the same to constitute Additional Rent hereunder. 7.02 Electricity used by Tenant in the Premises shall, at Landlord’s option, be paid for by Tenant by a separate, flat-rate charge (except the same may be increased as hereinafter provided in this Section 7.02) payable by Tenant to Landlord monthly with Rent, initially estimated (at the rate of $1.50 per rentable square foot of the Premises) to be in the amount of $1,633.25 per month ($19,599.00 per annum), payable as Additional Rent hereunder. Landlord shall have the right from time to time to reasonably increase such monthly flat-rate amount payable by Tenant hereunder based on actual increases in the cost of electricity (and/or the generation thereof) to Landlord in connection with the Property with no xxxx up by Landlord. Without the consent of Landlord, Tenant’s use of electrical service shall not exceed the Building standard usage of six (6) xxxxx per square foot, as reasonably determined by Landlord, based upon the Building standard electrical design load. Landlord shall have the right to measure electrical usage by commonly accepted methods, including the installation of measuring devices such as submeters and check meters. If it is determined that Tenant is using electricity in such quantities or during such periods as to cause the total cost of Tenant’s electrical usage, on a monthly, per-rentable-square-foot basis, to materially exceed that which Landlord reasonably deems to be standard for the Building, Tenant shall pay Landlord Additional Rent for the cost of such excess electrical usage and, if applicable, for the cost of purchasing and installing the measuring device(s). 7.03 Landlord’s failure to furnish, or any interruption, diminishment or termination of services due to the application of Laws, the failure of any equipment, the performance of maintenance, repairs, improvements or alterations, utility interruptions or the occurrence of an event of Force Majeure (defined in Section 26.03) (collectively a “Service Failure”) shall not render Landlord liable to Tenant, constitute a constructive eviction of Tenant, give rise to an abatement of Rent, nor relieve Tenant from the obligation to fulfill any covenant or agreement. Notwithstanding the foregoing, if all or any portion of the Premises is rendered Untenantable (as defined below) solely as a result of the failure of any Essential Service (as defined below) due to Landlord’s negligence or willful misconduct and Tenant does not use or occupy the same during said period, then Tenant’s obligation pay Base Rent and Additional Rent hereunder shall be abated in proportion to the portion of the Premises rendered Untenantable until the date on which such Untenantability is cured, provided that such abatement shall not commence until the fifth (5th) Business Day after the date on which Tenant delivers written notice to Landlord of the interruption and an opportunity, within such five (5) Business Day period, to cure same. The rate at which Base Rent or Additional Rent may be abated under this Section 7.03 in any one calendar month shall not exceed twenty-five percent (25%) of the Base Rent payable for such calendar month, provided that any amount not permitted to be taken as an abatement as a result of such monthly cap shall be credited against the Base Rent or Additional Rent next thereafter due under this Lease, subject to such monthly cap. In the event that the foregoing monthly cap would have the effect of depriving Tenant of any portion of abatement to which it is otherwise entitled hereunder due to the number of calendar months remaining in the term, the monthly cap may be increased proportionately to the extent necessary to avoid such result.

  • Dining Services The Contract is for a space in a University Housing & Dining Services (“UHDS”) facility and not for a particular room or type of housing. By signing this Contract, you agree to accept your residence assignment, and understand this assignment may change. Once you receive a key to your assigned residence or move personal belongings into your room (whichever comes first) you are considered to have taken occupancy (“Occupancy”) and will incur charges. You also agree to familiarize yourself and comply with all University policies governing occupancy, including those set forth in this Contract and in the UHDS publication Student Policy and Information Guide, to be considerate of other residents and to respect the rights of others at all times. The Student Policy and Information Guide may be found at: xxxx://xxxx.xxxx/policy-guide, as well as in paper form when requested at the University Housing & Dining Services Administrative Offices.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Architecture The Private Improvements shall have architectural features, detailing, and design elements in accordance with the Project Schematic Drawings. All accessory screening walls or fences, if necessary, shall use similar primary material, color, and detailing as on the Private Improvements.

  • Information Technology Enterprise Architecture Requirements If this Contract involves information technology-related products or services, the Contractor agrees that all such products or services are compatible with any of the technology standards found at xxxxx://xxx.xx.xxx/iot/2394.htm that are applicable, including the assistive technology standard. The State may terminate this Contract for default if the terms of this paragraph are breached.

  • Professional Engineering and Architect’s Services Professional Engineering and Architect’s Services are not permitted to be provided under this Agreement. Texas statutes prohibit the procurement of Professional Engineering and Architect’s Services through a cooperative agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!