Vehicle Specifications, Maintenance, and Appearance Sample Clauses

Vehicle Specifications, Maintenance, and Appearance. All Vehicles shall be properly registered 811 with the Department of Motor Vehicles of the State of California, shall be properly insured, shall 812 be of a type approved by the County, shall be kept clean and in good repair, and shall be 813 continuously maintained in a watertight condition. Vehicles used to Collect or Transport Solid 814 Waste shall be kept covered at all times except when such material is actually being loaded or 815 unloaded, or when the Vehicles are moving along a Collection route in the course of Collection. All 816 Vehicles shall carry a broom, shovel, and operable fire extinguisher. Solid Waste Collection 817 Vehicles shall be washed at least once every seven (7) days and cleaned and painted as required 818 to maintain a clean appearance. All Vehicles must be made available for inspection upon two (2) 819 Business Days’ notice by the County Contract Manager.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Vehicle Specifications, Maintenance, and Appearance. All Vehicles shall be properly registered 812 with the Department of Motor Vehicles of the State of California, shall be properly insured, shall 813 be of a type approved by the County, shall be kept clean and in good repair, and shall be 814 continuously maintained in a watertight condition. Vehicles used to Collect or Transport Solid 815 Waste shall be kept covered at all times except when such material is actually being loaded or 816 unloaded, or when the Vehicles are moving along a Collection route in the course of Collection. All 817 Vehicles shall carry a broom, shovel, and operable fire extinguisher. Solid Waste Collection 818 Vehicles shall be washed at least once every seven (7) days and cleaned and painted as required 819 to maintain a clean appearance. All Vehicles must be made available for inspection upon two (2) 820 Business Days’ notice by the County Contract Manager. 821 D. Spillage. Any cover or screen shall be so constructed and used that Solid Waste shall not blow, fall, 822 or leak out of the Vehicle onto the street. In the event of a spill, leak, or loss of payload during 823 transit, the Contractor shall immediately arrange for the clean up and Transportation of the 824 payload to the appropriate facility at the Contractor's sole cost and expense, shall pay any 825 resulting fines, assessments, penalties, or damages resulting therefrom, and shall indemnify and 826 hold harmless the County in accordance with the procedures provided in Section 12.1 hereof from 827 all loss-and-expense resulting therefrom.
Sample 1Sample 2
Vehicle Specifications, Maintenance, and Appearance. All vehicles used by Franchisee in providing the Franchise services shall (1) be registered with the California Department of Motor Vehicles (2) be kept clean and in good repair, and (3) be uniformly painted. Vehicles used to collect or transport solid waste materials shall be kept covered at all times except when such materials are actually being loaded or unloaded or when the vehicles are moving along a collection route in the course of collection. Any cover or screen shall be so constructed and used that solid waste shall not blow, fall or leak out of the vehicle onto the street. Collection vehicles shall be washed at least once every seven (7) days and cleaned and painted as required to maintain a like-new appearance. No advertisement or other display shall be carried on any collection vehicle without the written approval of the City Manger. All Franchise vehicles used in connection with this Franchise may be required to be inspected and approved by the City on a yearly basis. Franchisee may have such inspection conducted by the California Highway Patrol, or other designated agency, and shall provide the results of such inspection to the City Manager within ten (10) working days of receipt.
Sample 1
Vehicle Specifications, Maintenance, and Appearance. All vehicles used by the Manager in providing the Operation and Maintenance Services or in conducting any Construction Work shall be registered with the appropriate state Department of Motor Vehicles, shall be kept clean and in good repair, and shall be uniformly painted. No advertisement or other display shall be carried on any vehicle without the written approval of the Authority.
Sample 1
Vehicle Specifications, Maintenance, and Appearance. All Vehicles shall be properly registered with the Department of Motor Vehicles of the State of California, shall be properly insured, shall be of a type approved by the Director, shall be kept clean and in good repair, and shall be continuously maintained in a watertight condition, pursuant to industry standards. Vehicles used to collect, or transport Temporary Waste shall be kept covered at all times except when such material is actually being loaded or unloaded. All Vehicles shall carry a broom, shovel, and operable fire extinguisher. Vehicles shall be washed at least once every seven (7) days and cleaned and painted as required to maintain a like-new appearance. All Vehicles must be made available for inspection upon reasonable notice by the Director. In addition, the Page 20 Non-Exclusive Franchise Agreement Franchisee shall meet all requirements of the Biannual Inspection Terminal (BIT) Program and shall provide the results of the BIT Program to the Director within ten
Sample 1

Related to Vehicle Specifications, Maintenance, and Appearance

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Maintenance and Support Services If this Agreement is for IT goods or services, this section applies: Unless otherwise specified in this Agreement: The Contractor shall promptly provide the Court with all Upgrades, including without limitation: (i) all Upgrades generally made available by Contractor to its other customers; (ii) Upgrades as necessary so that the Work complies with the Specifications and Applicable Law (including changes in Applicable Law); (iii) Upgrades as necessary so that the Work operates under new versions or releases of the Court’s operating system or database platform; and (iv) all on-site services necessary for installation of Upgrades. Without limiting any other obligation of Contractor under this Agreement, Contractor represents and warrants that it will maintain services, equipment, software or any other part of the Work so that they operate in accordance with their Specifications and Documentation; and The Contractor shall respond to the Court within four (4) hours after the Court reports a Technical Support Incident (such hours all occurring during Standard M&S Hours) to Contractor. DELIVERY, ACCEPTANCE, AND PAYMENT Delivery. Contractor shall deliver to the Court the Deliverables in accordance with this Agreement, including the Statement of Work. Unless otherwise specified by this Agreement, Contractor will deliver all goods purchased by the Court “Free on Board Destination Freight Prepaid” to the Court at the address and location specified by the Court. Title to all goods purchased by the Court vests in the Court upon payment of the applicable purchase price. Contractor will bear the risk of loss for any Work being delivered until received by the Court at the proper location. All shipments by Contractor or its Subcontractors must include packing sheets identifying: this Agreement number, the Court’s purchase order number, item number, quantity and unit of measure, part number and description of the goods shipped, and appropriate evidence of inspection, if required. Goods for different Agreements shall be listed on separate packing sheets.

  • System Maintenance The Trust understands that USBFS will perform periodic maintenance to the System(s), which may cause temporary service interruptions. To the extent possible, USBFS shall notify the Trust of all planned outages and will perform any necessary maintenance during non-business hours.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Vehicle Maintenance 16.1 You must report to thl as soon as possible, where the oil is above or below the recommended level or the warning indication light is illuminated. 16.2 You must add water/coolant to the cooling system and an appropriate Australian Society of Automotive Engineers rated oil for petrol or diesel powered vehicles (as applicable) to the engine if the indicator level is below minimum. 16.3 You agree to maintain the Vehicle in these conditions and acknowledge that any mechanical damage occasioned as a result of Your failure to maintain the Vehicle in accordance with this clause must be paid by You.

  • Software Maintenance Subrecipient shall apply security patches and upgrades in a timely manner and keep virus software up-to-date on all systems on which State data may be stored or accessed.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!