Vibration Isolation Sample Clauses

Vibration Isolation. Basis of design isolators shall be Xxxxx-Xxxxx, Kinetics, or Vibration Eliminator. Springs shall have minimum K to KY ratio of 1.5.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Vibration Isolation. Mechanical noise and vibration isolation for piping and equipment under the jurisdiction of the Pipefitter.
Sample 1Sample 2Sample 3
Vibration Isolation. 8.1.1. The PRODUCT incorporated a bridge to sample mechanism specifically designed to be rigid and to reduce mechanical vibrations. Standard vibration isolation is passive, with kinematic damping pads located under the base of the instrument. An optional active vibration isolation platform is available. The optional table for the PRODUCT will feature a resonant frequency of less than 2Hz and ensure that noise levels do not exceed 1 Angstrom under normal operating conditions. Normal conditions are defined as the following: ======================================================= Frequency Range PRODUCT Specification (Hz) ======================================================= 1 to 8 Displacement < 5.0 in ------------------------------------------------------- 8 to 50 Velocity < 250 in/sec ------------------------------------------------------- 50 to 200 Acceleration < 0.08 in/sec2 =======================================================
Sample 1
Vibration Isolation. Structural floor modifications required to mitigate vibration of the Tenant’s equipment. ESTIMATED TENANT’S WORK SCHEDULE MILESTONE DELIVERABLE DATE 1 – Award Release Precon/Design & Award Design Consultants Dec 14,2012 2 – BOD Affirm BOD, Constructability Reviews & Value Engineering Suggestions Feb 20, 2013 4 – Design Development - Tenant Issue Base Building Modification Bulletin for Landlord Approval April 12, 2013 5 – Design Development - Tenant 100% Detailed Design, Project Schedule Update, Release for Permit April 3, 2013 6 – Procurement Long Lead Tenant Furnished Equipment As Required 7 – Construction GMP Agree to Construction Manager GMP Aug. 6, 2013 8 – Construction Documents 100% Construction Documentation July 23, 2013 9 – Enabling Works** Fuel Tank & Make-up Water Storage Placement Nov. 2013 10 – Mobilization*** Planned “Early Access Notice”* April 1, 2014 11 – Commissioning Tenant’s system testing completed and “Customer Ready” Nov. 2014 12 – Close-out As-Builts, Punchlist, Commercial Closeout Dec. 2014 13 – Landlord’s Work Target Substantial Completion Date 668 days from commencement thereof * Denotes Planned Lease Milestone as identified in Exhibit E ** Reference Exhibit E-2 “Landlord’s Work” Item #7 *** Dates based on 2013 Jan.09 Base Building Full Mobilization Start Date E.O.&E. EXHIBIT F SHARED ACCESS AGREEMENT RECIPROCAL EASEMENT AND ACCESS AGREEMENT Made as of the day of , 2012. BETWEEN: 271 FRONT INC. (hereinafter called “Front”) OF FIRST PART; -and- 281 NORTH PARLIAMENT INC. (hereinafter called “Parliament”) OF THE SECOND PART.
Sample 1
Vibration Isolation. All new remote I/O enclosures shall be vibration isolated from the rest of the test stand. Thermal Management, Enclosures All remote I/O cabinets and other enclosures shall have the means of monitoring internal temperature. Alarms shall be implemented to prevent operation outside manufacture’s recommended temperature limits. All enclosures shall be designed to provide thermal management, ensuring all internal electronics operate within their recommended temperature envelop. Enclosures shall be selected to be compatible with installed component manufacturers’ recommendations for environmental enclosures. Cooling may be active or passive. Whenever possible, enclosures shall utilize passive environmental controls. Passive environmental control is preferable to active control, and minimal active control is preferable to more complex methods, for example: a fan-less ventilated enclosure that meets component manufacturer’s recommendations is preferred; however, if active cooling is required, adding a fan to the enclosure is preferred over adding an enclosure air conditioner. See ¶3.72. Feedback from System Commands The system shall provide feedback for all system commands to ensure the commanded action occurred. (For example, if the system commands a pump on, the system must also monitor the state of the pumps operation, [ie pressure, current], providing feedback on its operational state). The system shall detect if a command has not occurred and issue an alarm or notification to the operator. The contractor shall provide any/all hardware required to accomplish this. Replace Torque Measurement System, Replace the torque measurement systems (including the custom system in PRGB). The new system shall be commercial off the shelf and meet or exceed the current accuracy of the existing devices. Should the new unit require a dimensional change, the contractor is responsible for the alterations (for example: new shafting, etc.).
Sample 1

Related to Vibration Isolation

  • Noise The Hirer shall ensure that the minimum of noise is made on arrival and departure, particularly late at night and early in the morning. The Hirer shall, if using sound amplification equipment, make use of any noise limitation device provided at the premises and comply with any other licensing condition for the premises.

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

  • Contamination The presence in, on or under land, air or water of a substance (whether a solid, liquid, gas, odour, heat, sound, vibration or radiation) at a concentration above the concentration at which the substance is normally present in, on or under land, air or water in the same locality, that presents a risk of Environmental Harm, including harm to human health or any other aspect of the Environment, or could otherwise give rise to a risk of non-compliance with any Statutory Requirement for the protection of the Environment.

  • Speed The relative importance we attach is “high”.

  • Trash Tenant shall not allow anything to be placed on the outside of the Building, nor shall anything be thrown by Tenant out of the windows or doors, or down the corridors or ventilating ducts or shafts, of the Building. All trash and refuse shall be placed in receptacles provided by Landlord for the Building or by Tenant for the Premises.

  • Excavation If any excavation shall be made upon land adjacent to or under the Building, or shall be authorized to be made, Tenant shall afford to the person causing or authorized to cause such excavation, license to enter the Premises for the purpose of performing such work as said person shall deem necessary or desirable to preserve and protect the Building from injury or damage and to support the same by proper foundations, without any claim for damages or liability against Landlord and without reducing or otherwise affecting Tenant’s obligations under this Lease.

  • Electrical Provide drawings for the following systems:

  • Sampling The Licensee agrees that the Composition is purchased as a “Work Made for Hire” whereby the clearing of any sampled materials is the responsibility of Licensee.

  • Testing Landlord shall have the right to conduct annual tests of the Premises to determine whether any contamination of the Premises or the Project has occurred as a result of Tenant’s use. Tenant shall be required to pay the cost of such annual test of the Premises; provided, however, that if Tenant conducts its own tests of the Premises using third party contractors and test procedures acceptable to Landlord which tests are certified to Landlord, Landlord shall accept such tests in lieu of the annual tests to be paid for by Tenant. In addition, at any time, and from time to time, prior to the expiration or earlier termination of the Term, Landlord shall have the right to conduct appropriate tests of the Premises and the Project to determine if contamination has occurred as a result of Tenant’s use of the Premises. In connection with such testing, upon the request of Landlord, Tenant shall deliver to Landlord or its consultant such non-proprietary information concerning the use of Hazardous Materials in or about the Premises by Tenant or any Tenant Party. If contamination has occurred for which Tenant is liable under this Section 30, Tenant shall pay all costs to conduct such tests. If no such contamination is found, Landlord shall pay the costs of such tests (which shall not constitute an Operating Expense). Landlord shall provide Tenant with a copy of all third party, non-confidential reports and tests of the Premises made by or on behalf of Landlord during the Term without representation or warranty and subject to a confidentiality agreement. Tenant shall, at its sole cost and expense, promptly and satisfactorily remediate any environmental conditions identified by such testing in accordance with all Environmental Requirements. Landlord’s receipt of or satisfaction with any environmental assessment in no way waives any rights which Landlord may have against Tenant.

  • Waste Borrower shall not commit or suffer any waste of the Property or make any change in the use of the Property which will in any way materially increase the risk of fire or other hazard arising out of the operation of the Property, or take any action that might invalidate or give cause for cancellation of any Policy, or do or permit to be done thereon anything that may in any way impair the value of the Property or the security of this Security Instrument. Borrower will not, without the prior written consent of Lender, permit any drilling or exploration for or extraction, removal, or production of any minerals from the surface or the subsurface of the Land, regardless of the depth thereof or the method of mining or extraction thereof.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!