WARRANTY AND MAINTENANCE PERIOD Sample Clauses

WARRANTY AND MAINTENANCE PERIOD. ‌ The content and the conditions of 2 (two) years Warranty and Maintenance Period shall be mutually agreed prior to signing the Contract. The content and the conditions of the agreed Warranty & Maintenance Period shall be documented as part of this Contract signed by both Parties. If, for any reason, the Supplier cannot provide the maintenance and other services as in the content and the conditions of the warranty and maintenance period, the Employer shall perform the maintenance and other services by himself such that the content and conditions of the warranty and maintenance period will not be affected. Warranty and Maintenance Period shall start upon the receipt of Final Acceptance Certificate. The cost and any expense involved due to this Clause (Clause 25) is included in the Price as shown in “Section 5: Xxxx of Quantities”.
Sample 1
AutoNDA by SimpleDocs
WARRANTY AND MAINTENANCE PERIOD. Packetalk warrants to the Township that the materials and equipment furnished by Packetalk under this Agreement will be fit for the intended purpose, of good quality and new unless otherwise required or permitted by the RFP, that the work will be free from defects, and that the work will conform with the requirements of the RFP and Packetalk’s responses thereto. Work not conforming to such requirements, including substitutions not properly approved and authorized, shall be con□sidered defective and shall be replaced or corrected. In the event the Township inquires, Packetalk shall furnish evidence, satisfactory to the Township, as to the nature and quality of any work, materials or equipment furnished under this Agreement. Packeta lk’s service and maintenance obligations shall begin upon installation, completion and acceptance of the Work, and all ancillary equipment related thereto. Packetalk will provide theTownship with all available manufacturer’s warranties and documentation therefor, covering the materials, equipment and goods supplied under this Agreement. Such manufacturer’s warranties shall survive the completion and acceptance of the Agreement, and shall remain in effect according to their terms.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. After approval of the revegetation, stabilization and erosion control measures and Second Reduction, a twelve (12) month warranty and maintenance period (“Warranty and Maintenance Period”) shall commence from the date of the Second Reduction. The Property Owner shall replant, reseed and stabilize all non-stabilized areas of the Disturbed Areas during the Warranty and Maintenance Period and take all other actions necessary to provide erosion control and slope and area stabilization within the Disturbed Areas.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. The Parties agree that in the event that one or more components of the Fire Truck has to be replaced or maintained by the Supplier due to the content and the conditions of Warranty & Maintenance Period, the Supplier shall commence actions within 48 hours without any charge for the Employer. In case the Supplier fails to fulfill its obligations as per the content and the conditions of Warranty & Maintenance Period, the Employer shall be entitled to payment of 0.05% of the Total Contract Price per day of service/maintenance delay.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. ‌ The content and the conditions of 2 (two) years Warranty and Maintenance Period shall be mutually agreed prior to signing the Contract. The content and the conditions of the agreed Warranty & Maintenance Period shall be documented as part of this Contract signed by both Parties. Warranty and Maintenance Period shall start upon the receipt of Final Acceptance Certificate. The cost and any expense involved due to this Clause (Clause 25) is included in the Price as shown in “Section 4: Xxxx of Quantities”.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. The Parties agree that in the event that one or more components of the Terminal Tractors have to be replaced or maintained by the Supplier due to the content and the conditions of Warranty & Maintenance Period, the Supplier shall commence actions within 24 hours without any charge for the Employer. In case the Supplier fails to fulfill its obligations as per the content and the conditions of Warranty & Maintenance Period, the Employer shall be entitled to payment of 0.05% of the Total Contract Price per day of service/maintenance delay.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. The Parties agree that in the event that one or more components of the Heavy Handling Equipment have to be replaced or maintained by the Supplier due to the content and the conditions of Warranty & Maintenance Period, the Supplier shall commence actions within 24 hours without any charge for the Employer. In case the Supplier fails to fulfill its obligations as per the content and the conditions of Warranty & Maintenance Period, the Employer shall be entitled to payment of 0.05% of the Total Contract Price per day of service/maintenance delay.
Sample 1
AutoNDA by SimpleDocs
WARRANTY AND MAINTENANCE PERIOD. The Parties agree that in the event that one or more components of the Forklifts have to be replaced or maintained by the Supplier due to the content and the conditions of Warranty & Maintenance Period, the Supplier shall commence actions within 24 hours without any charge for the Employer. In case the Supplier fails to fulfill its obligations as per the content and the conditions of Warranty & Maintenance Period, the Employer shall be entitled to payment of 0.05% of the Total Contract Price per day of service/maintenance delay.
Sample 1
WARRANTY AND MAINTENANCE PERIOD. ‌ The content and the conditions of 2 (two) years or 3000 hours of Warranty and Maintenance Period shall be mutually agreed prior to signing the Contract. The content and the conditions of the agreed Warranty & Maintenance Period shall be documented as part of this Contract signed by both Parties. The manufacturer must fulfill the maintenance/repair service request of the Employer within a reasonable period of time during the warranty and maintenance period. In the event that the Supplier cannot send service personnel to Mogadishu due to any force majeure, the Supplier shall direct the Employer’s technical team remotely and carries out service and maintenance with the approved materials. In such case the warranty and maintenance terms are not violated. Warranty and Maintenance Period shall start upon the receipt of Final Acceptance Certificate. The cost and any expense involved due to this Clause (Clause 25) is included in the Price as shown in “Section 5: Xxxx of Quantities”.
Sample 1

Related to WARRANTY AND MAINTENANCE PERIOD

  • INTERIM MAINTENANCE PERIOD During the interim maintenance period between obtaining of the completion certificate of Project and formation and operationalization of the Association the Promoter shall through itself or through a facility management company constitute a committee to run, operate, manage and maintain the Common Areas.

  • Maintenance Period During the Maintenance Period the Developer shall at its own expense maintain repair and otherwise S.9 keep the Works in good working order and repair to the reasonable satisfaction of xxx Xxxxxxxxxx unless xxx Xxxxxxxxxx shall declare that any required maintenance and/or repair is an emergency in which case the Developer shall carry out the said maintenance and/or repair immediately Access to the Works and consequences of inspections The Developer shall arrange for xxx Xxxxxxxxxx to have access to the Works and the Site at all

  • Operations and Maintenance Notice Each Party shall notify the other Parties in writing of the identity of the person(s) that it designates as the point(s) of contact with respect to the implementation of Articles 9 and 10.

  • Support and Maintenance Where Licensee purchases support and/or maintenance services, Licensee’s initial support and/or maintenance term will begin upon delivery to Licensee of the Licensed Software and continue for one (1) year thereafter (or the length of the term if less than a year for any subscription/term license) unless otherwise specified in the applicable annual support and/or maintenance agreement, Product Order, or other written agreement executed between Licensor and Licensee. Where Licensee purchases support and/or maintenance for any Licensed Software, Licensee hereby agrees that it shall purchase such support and/or maintenance services for all of Licensee’s licensed units of such Licensed Software product. Support and/or maintenance services provided by Licensor will be subject to Licensor’s then current applicable standard annual support and/or maintenance agreement unless otherwise agreed by the parties in writing.

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire

  • Repairs and Maintenance The Tenant shall (a) take good care of the Apartment and all equipment and fixtures in it; (b) promptly make all necessary repairs and replacements whenever the need results from the Tenant's act of neglect or the neglect of Tenant’s family members, guests, visitors or contractors (if consented to by Landlord); (c) keep the Apartment and any other part of the building used by the Tenant as clean and safe as possible; and (d) promptly notify the Landlord when there are conditions which need repair. Landlord shall have a reasonable amount of time to make repairs. Tenant shall be responsible for reimbursing the Landlord for the cost of any repairs that are not "normal wear and tear" repairs, any such costs shall be considered additional rent; (e) shall not attach to, hang from or place anything on the railings of the patio or deck; and ( f ) Tenant agrees not to install any partition walls. No outside contractor is authorized to perform any services at the Apartment or apartment complex unless approved in writing by a representative of the Landlord. If Tenant contracts for any such services without written consent of the Landlord, Tenant shall be wholly responsible for the payment for any such service and shall hold the Landlord harmless against any claim made by a contractor who performs any such service at the request of the Tenant. Tenant shall also be responsible for returning the apartment back to its original condition, or else shall be liable to the Landlord for the costs incurred for the Landlord to do so after Tenant vacates.

  • Road Maintenance Purchaser shall maintain roads, commensurate with Purchaser’s use, in accor- dance with Road Maintenance Requirements in C5.31 and the Road Maintenance Specifications. Performance of road maintenance work by Purchaser may be required prior to, during, or after each period of use. The timing of work accomplishment shall be based on Purchaser’s Op- erating Schedule under B6.31. When two or more commercial users are simultane- ously using the same road where Forest Service is not requiring maintenance deposits, the commercial users will develop maintenance responsibilities and arrangements for accomplishing the work. Forest Service must agree to this plan. If the commercial users cannot agree on main- tenance responsibilities, Forest Service shall resolve the differences. If Purchaser elects to use different roads than those listed in C5.31, Forest Service shall determine Pur- chaser’s commensurate share of road maintenance and revise road maintenance deposits in C5.32. If Forest Service cannot perform its full commensu- rate share of road maintenance, Forest Service shall make a cash payment to Purchaser for performance of such work. Unless agreed in writing, prehaul maintenance shall be completed on any portion of road prior to hauling on that portion. Maintenance, as used in this contract, does not include road reconstruction or repairs of an extraordi- nary nature.

  • Operations and Maintenance Pursuant to Section 10.5 of this Agreement, Developer shall pay the reasonable expenses (including overheads) for the operation, maintenance, repair and replacement of Transmission Owner’s Attachment Facilities and incremental operating and maintenance expenses incurred in association with System Upgrade Facilities, if and to the extent provided for under Attachment S. For Transmission Owner’s Attachment Facilities, such expenses are calculated as follows:

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Routine Maintenance (i) CRC shall be responsible for Routine Maintenance when necessary or desirable to maintain the Shared Assets in a safe operating condition, and to permit and facilitate (A) the performance by CRC of its obligations pursuant to this Agreement, and (B) the use of Shared Assets by the Operators in accordance with this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!