WELDING RIGS Sample Clauses

WELDING RIGS. Welder/Technicians will be paid rig pay as follows: (1) standby IRS current Dry Rate plus fuel to be provided by the Employer so long as the rig is on the jobsite and available for work; (2) if used on the same basis as paid under the National Pipeline Agreement.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
WELDING RIGS. (A) It shall not be a condition of employment for Welder Journeymen to provide their own welding rigs. It is understood and agreed, however, that a Welder Journeyman who is dispatched to a project as a rig Welder will be required to provide a usable rig as a condition of the dispatch. If the Union is unable to fill the dispatch request, the Employer may obtain rig Welders from any source in accordance with Article V(G)(4) of the Agreement. Rented welding rigs must, at a minimum, have a legally operable, mechanically sound truck, 200 amp or larger engine drive welding machine, 100 ft. of lead, 100 ft. of ground, 100 ft. of oxygen/acetylene hoses including hand torch, gauges and bottle racks, 100 ft. extension cord, and a grinder. (B) The Parties agree to treat rig rental rates as a mandatory subject of bargaining within the meaning of the National Labor Relations Act, with all of the rights and obligations that attach to such a subject of bargaining. (C) Employers who rent rigs from Welder Journeymen who perform work covered by this Agreement shall pay such Welder Journeymen the maximum hourly rate determined by the Internal Revenue Service (“IRS”) to be non-taxable pursuant to IRS Revenue Procedure 2002-41, as periodically increased by the IRS. The Parties shall agree at the pre-job conference whether the applicable rate shall be a “wet” rate or a “dry” rate. The rig rate will not be included in calculating total package annual increases. Payment for the rig rental shall be separate from the check or other payment for regular payroll. (D) If the IRS eliminates or issues a procedure or ruling that adversely affects the favorable tax status of rental payments for welding rigs currently provided for in IRS Revenue Procedure 2002-41, the Parties agree that they will reopen this Agreement for the limited purpose of renegotiating rig rental rates. (E) All rigs and welding machines will be gassed up during regular working hours (F) If a welding rig is damaged on the job during working hours, the Employer shall reimburse the Employee for the reasonable costs of repairs for damage resulting from Employer direction and/or work assignment but in no event shall the Employer be responsible for the cost of repairs if the damage was caused by Employee negligence or failure to operate in a safe manner. Employers are not responsible for the costs associated with standard maintenance, upkeep, or typical wear and tear to the rig. Employer is not required to pay for repair co...
Sample 1Sample 2See All (7)

Related to WELDING RIGS

  • As-Builts Seller shall provide final as-built drawings of the Seller-Owned Interconnection Facilities within 30 Days of the successful completion of the Acceptance Test.

  • Interconnection Facilities 4.1.1 The Interconnection Customer shall pay for the cost of the Interconnection Facilities itemized in Attachment 2 of this Agreement. The NYISO, in consultation with the Connecting Transmission Owner, shall provide a best estimate cost, including overheads, for the purchase and construction of its Interconnection Facilities and provide a detailed itemization of such costs. Costs associated with Interconnection Facilities may be shared with other entities that may benefit from such facilities by agreement of the Interconnection Customer, such other entities, the NYISO, and the Connecting Transmission Owner. 4.1.2 The Interconnection Customer shall be responsible for its share of all reasonable expenses, including overheads, associated with (1) owning, operating, maintaining, repairing, and replacing its own Interconnection Facilities, and

  • Contractor’s Equipment Payment for required equipment owned by the Construction Manager or an affiliate of the Construction Manager will be based solely on an hourly rate derived by dividing the current appropriate monthly rate by 176 hours. No payment will be made under any circumstances for repair costs, freight and transportation charges, fuel, lubricants, insurance, any other costs and expenses, or overhead and profit. Payment for such equipment made idle by delays attributable to the Government will be based on one-half the derived hourly rate under this subsection.

  • Interconnection Customer’s Interconnection Facilities The Interconnection Customer shall design, procure, construct, install, own and/or control the Interconnection Customer’s Interconnection Facilities described in Appendix A at its sole expense.

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • Scope of Interconnection Service 1.3.1 The NYISO will provide Energy Resource Interconnection Service and Capacity Resource Interconnection Service to Interconnection Customer at the Point of Interconnection. 1.3.2 This Agreement does not constitute an agreement to purchase or deliver the Interconnection Customer’s power. The purchase or delivery of power and other services that the Interconnection Customer may require will be covered under separate agreements, if any, or applicable provisions of NYISO’s or Connecting Transmission Owner’s tariffs. The Interconnection Customer will be responsible for separately making all necessary arrangements (including scheduling) for delivery of electricity in accordance with the applicable provisions of the ISO OATT and Connecting Transmission Owner’s tariff. The execution of this Agreement does not constitute a request for, nor agreement to, provide Energy, any Ancillary Services or Installed Capacity under the NYISO Services Tariff or any Connecting Transmission Owner’s tariff. If Interconnection Customer wishes to supply or purchase Energy, Installed Capacity or Ancillary Services, then Interconnection Customer will make application to do so in accordance with the NYISO Services Tariff or Connecting Transmission Owner’s tariff.

  • Participating TO’s Interconnection Facilities The Participating TO shall design, procure, construct, install, own and/or control the Participating TO’s Interconnection Facilities described in Appendix A at the sole expense of the Interconnection Customer. Unless the Participating TO elects to fund the capital for the Participating TO’s Interconnection Facilities, they shall be solely funded by the Interconnection Customer.

  • Interconnection Facility Options The Intercarrier Compensation provisions of this Agreement shall apply to the exchange of Exchange Service (EAS/Local) traffic between CLEC's network and Qwest's network. Where either Party acts as an IntraLATA Toll provider, each Party shall xxxx the other the appropriate charges pursuant to its respective tariff or price lists. Where either Party interconnects and delivers traffic to the other from third parties, each Party shall xxxx such third parties the appropriate charges pursuant to its respective tariffs, price lists or contractual offerings for such third party terminations. Absent a separately negotiated agreement to the contrary, the Parties will directly exchange traffic between their respective networks without the use of third party transit providers.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!