CE MARKING Sample Clauses

CE MARKING. 4.1 XDx hereby warrants and confirms that: (A) it will obtain the CE Approval within 45 days from the Effective Date and shall maintain the CE Xxxx and any other Regulatory Approvals for the Test and the Products in the Territory throughout the Term; and (B) the Test and the Products shall comply with the Directive throughout the Term.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
CE MARKING. Offered and delivered equipment or goods have to be compliant with Polish and European Union law requirements defined in the relevant directives or regulations, concerning the CE (Conformité Européenne) marking. All documentation as required by law shall be available in Polish. Buyer requires full support during process of risk assessment and certification of group of machines, where applicable.
Sample 1Sample 2
CE MARKING. Seller Covenants that all Goods conform with applicable Conformité Européenne (“CE”) directives for Goods intended for use in the EU, including those regarding electrical/electronic devices, machinery and pressure vessels/equipment. Seller will affix the CE mark on Goods as required. Seller will provide all documentation required by the applicable CE directives, including, but not limited to, Declarations of Conformity, Declarations of Incorporation, technical files and any documentation regarding interpretations of limitations or exclusions.
Sample 1
CE MARKING. In addition, Supplier agrees to add any other identification which might be requested in writing by Company. Charges, if any for such additional identification marking shall be as agreed upon by Supplier and Company prior to the implementation of any change. This Section does not reduce or modify Supplier's obligations under Section 26 IDENTIFICATION.
Sample 1
CE MARKING. Equipment designed for rated voltages between 50 and 1000 V AC, or between 75 and 1500 V DC, shall have the CE marking affixed as a confirmation of the equipment fulfilling the safety requirements in section 4 and all relevant requirements in other regulations requiring CE marking of equipment. Equipment designed for rated voltage outside the voltage range specified in the first paragraph, shall have the CE marking affixed if the equipment fulfil all relevant requirements in other regulations requiring CE marking of the equipment. The CE marking shall be affixed to each single specimen of the equipment. The manufacturer or his authorized representative established within the EEA shall affix the CE marking which must be clearly visible, easy readable and durable. If it is not possible to affix the CE marking on the equipment itself, the CE making can be affixed to its packaging, the user documentation or the guarantee certificate. It is not allowed to affix marking on the equipment, its packaging, user documentation or guarantee certificate that can be mistaken for the CE marking or that may be misleading with respect to the meaning and form of the CE marking. All other marking can be affixed to the equipment, its packaging, user documentation or guarantee certificate on the condition that it will not make the CE marking less visible or more difficult to read. The CE marking is reproduced in figure 1 of Regulations 20 June 2000 no. 628 on EEA requirements related to radio equipment and telecommunications terminal equipment.
Sample 1
CE MARKING. As Corgenix has the capability and know-how to provide CE-Marking services, BG Medicine, in its sole discretion, may or may not request of Corgenix that such CE Marking services be provided. If BG Medicine requests these CE Marking services of Corgenix, then, in consideration for the payment set forth in Exhibit F, Corgenix shall use all commercially reasonable efforts to obtain CE Marking certification for any and all Products by performing the tasks as set forth in Exhibit F, which Corgenix shall use all commercially reasonable efforts to complete within two weeks following completion of all tasks required to create the Technical File for Product. To the extent full services for CE Marking are not requested, the fees will be adjusted accordingly. Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Registrant’s application requesting confidential treatment pursuant to Rule 406 of the Securities Act of 1933, as amended.
Sample 1
CE MARKING. As Corgenix has the capability and know-how to provide CE-Marking services, BG Medicine, in its sole discretion, may or may not request of Corgenix that such CE Marking services be provided. If BG Medicine requests these CE Marking services of Corgenix, then, in consideration for the payment set forth in Exhibit F, Corgenix shall use all commercially reasonable efforts to obtain CE Marking certification for any and all Products by performing the tasks as set forth in Exhibit F, which Corgenix shall use all commercially reasonable efforts to complete within two weeks following completion of all tasks required to create the Technical File for Product. To the extent full services for CE Marking are not requested, the fees will be adjusted accordingly.
Sample 1
AutoNDA by SimpleDocs
CE MARKING. The Customer acknowledges and accepts that the Platform is CE-marked and distributed to a large number of customers. For this reason, the Supplier is not necessarily able to follow such instructions from the Customer that are not a direct consequence of the Customer's need to follow the GDPR. If the Customer gives the Supplier instructions that the Supplier do not have the possibility to follow, the Customer undertakes to stop entering and exporting all such Personal Data that is affected by the current instructions. The foregoing shall not constitute a breach of the Agreement or the availability of the Platform.
Sample 1

Related to CE MARKING

  • Patent Marking LICENSEE shall xxxx all Licensed Products made, used or sold under the terms of this Agreement, or their containers, in accordance with the applicable patent marking laws.

  • Marking of Licensed Products To the extent commercially feasible and consistent with prevailing business practices, Company shall xxxx, and shall cause its Affiliates and Sublicensees to xxxx, all Licensed Products that are manufactured or sold under this Agreement with the number of each issued patent under the Patent Rights that applies to such Licensed Product.

  • Labelling The distributor, on behalf of the selected vendor agrees that all supplies of articles should invariably contain the following information on its label and the carton. One information should not be overlapped by any other information needed to be furnished. The label should contain : a. Name of the item as approved b. CMS Cat. No. c. Manufacturing date/Import date for the imported items. d. Expiry Date. (where applicable) e. Name & address of Registered Office of Manufacturers and place of manufacture. f. Manufacturing License Number. (where applicable for Manufactures) g. Batch Number (where applicable) h. Month and Year of supply. i. The label & Carton must invariably marked “W B. GOVT SUPPLY : NOT FOR SALE”. j. All Surgical items quoted/supplied by the tenderer must conform to IS /BIS /CE/USFDA. Pacemker must conform to CE & US FDA norms. In case of Drugs items quoted /supplied by tenderer MUST CONFORM TO IP, BP, or USP norms and N.F.I. –III specification as noted against the item(s) in catalogue as applicable. k. The MRP and Trade Name will not be allowed to be printed in any pack. This will lead to cancellation of candidature straightaway. However, for excisable products, insertion of writing of Govt MRP is allowed as per provision laid down in the order of the Central Excise dept. However, for imported item(s), MRP and Trade name may be allowed in addition to Generic name.

  • Marking Shipments, shipping containers and palletized unit loads shall be marked in accordance with MIL- STD-129R with Change 1 dated 24 May 2018.

  • Service Marks BlueCross BlueShield of Western New York is an independent corporation organized under the New York Insurance Law. BlueCross BlueShield of Western New York also operates under licenses with the BlueCross BlueShield Association, which licenses BlueCross BlueShield of Western New York to use the BlueCross BlueShield service marks in a portion of New York State. BlueCross BlueShield of Western New York does not act as an agent of the BlueCross BlueShield Association. BlueCross BlueShield of Western New York is solely responsible for the obligations created under this agreement.

  • Markings If permitted by applicable Law, on or reasonably promptly after the Closing Date, Owner will cause to be affixed to, and maintained in, the cockpit of the Airframe and on each Engine, in each case, in a clearly visible location, a placard of a reasonable size and shape bearing the legend: “Subject to a security interest in favor of Wilmington Trust, National Association, not in its individual capacity but solely as Mortgagee.” Such placards may be removed temporarily, if necessary, in the course of maintenance of the Airframe or Engines. If any such placard is damaged or becomes illegible, Owner shall promptly replace it with a placard complying with the requirements of this Section.

  • Product Labeling The labeling of all Licensed Products sold or offered for sale under this Agreement shall expressly state that the Licensed Product is manufactured under a license from the Medicines Patent Pool.

  • License; Use Upon delivery to an Authorized Person or a person reasonably believed by Custodian to be an Authorized Person of the Fund of software enabling the Fund to obtain access to the System (the “Software”), Custodian grants to the Fund a personal, nontransferable and nonexclusive license to use the Software solely for the purpose of transmitting Written Instructions, receiving reports, making inquiries or otherwise communicating with Custodian in connection with the Account(s). The Fund shall use the Software solely for its own internal and proper business purposes and not in the operation of a service bureau. Except as set forth herein, no license or right of any kind is granted to the Fund with respect to the Software. The Fund acknowledges that Custodian and its suppliers retain and have title and exclusive proprietary rights to the Software, including any trade secrets or other ideas, concepts, know-how, methodologies, or information incorporated therein and the exclusive rights to any copyrights, trademarks and patents (including registrations and applications for registration of either), or other statutory or legal protections available in respect thereof. The Fund further acknowledges that all or a part of the Software may be copyrighted or trademarked (or a registration or claim made therefor) by Custodian or its suppliers. The Fund shall not take any action with respect tot the Software inconsistent with the foregoing acknowledgement, nor shall the Fund attempt to decompile, reverse engineer or modify the Software. The Fund may not xxx, sell, lease or provide, directly or indirectly, any of the Software of any portion thereof to any other person or entity without Custodian’s prior written consent. The Fund may not remove any statutory copyright notice or other notice included in the Software or on any media containing the Software. The Fund shall reproduce any such notice on any reproduction of the Software and shall add any statutory copyright notice or other notice to the Software or media upon Custodian’s request.

  • Regulatory Applications (a) Western and PNB and their respective Subsidiaries shall cooperate and use their respective reasonable best efforts to prepare all documentation, to effect all filings and to obtain all permits, consents, approvals and authorizations of all third parties and Governmental Authorities necessary to consummate the transactions contemplated by this Agreement. Western and PNB shall use their reasonable best efforts to make all required bank regulatory filings, including the appropriate filing with the Regulatory Authorities. Each of Western and PNB shall have the right to review in advance, and to the extent practicable each will consult with the other, in each case subject to applicable laws relating to the exchange of information, with respect to all material written information submitted to any third party or any Governmental Authority in connection with the transactions contemplated by this Agreement. In exercising the foregoing right, each of the parties hereto agrees to act reasonably and as promptly as practicable. Each party hereto agrees that it will consult with the other party hereto with respect to the obtaining of all material permits, consents, approvals and authorizations of all third parties and Governmental Authorities necessary or advisable to consummate the transactions contemplated by this Agreement and each party will keep the other party appraised of the status of material matters relating to completion of the transactions contemplated hereby. (b) Each party agrees, upon request, to furnish the other party with all information concerning itself, its Subsidiaries, directors, officers and shareholders and such other matters as may be reasonably necessary or advisable in connection with any filing, notice or application made by or on behalf of such other party or any of its Subsidiaries to any third party or Governmental Authority.

  • AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!