CYLINDERS Sample Clauses

CYLINDERS. All Cylinders supplied and owned by A-Gas for the packaging of the Product, for distribution into the Heatcraft Group, remain the property and responsibility of A-Gas at all times. Should VTPL require the Product in A-Gas Cylinders, for whatever reason, VTPL agrees to pay the A-Gas Cylinder Service Charges including all costs for lost or damaged Cylinders in accordance with Appendix 5.
Sample 1Sample 2
AutoNDA by SimpleDocs
CYLINDERS. Containers shall be designed to hold the specific extinguishant. Containers shall not be charged to a full density greater than specified in that part of ISO 14520 relating to the specific extinguishant. Cylinders shall be designed to suit the working pressure of the gas offered. Design pressure shall be at least 1.5 times the working pressure or relevant to an accepted manufacturing standard to be supplied with certificate of compliance (COC) from SANAS approved authorised inspection authority (AIA). Container and valve manifolds shall be tested hydraulically to the highest pressure of that specified by SANS ISO 14520, or manufacturer, or 450 bar test pressure and be substantiated by a relevant test certificate. All cylinders will be supplied with a pressure relief valve as per manufacturer accepted Standards and approval or in accordance with SANS 347 specification. DESIGN, SUPPLY, INSTALLATION AND COMMISSIONING OF INERT GAS FIRE SUPPRESSION SYSTEMS AND REPLACEMENT OF EXISTING CO2 SYSTEMS AT CAPE TOWN INTERNATIONAL AIRPORT SUBSTATIONS The containers used in these systems shall be designed to meet the requirements of relevant national standards and be TPED approved, particularly the Pressure Equipment Regulations (PER) under the Occupational Health and Safety Act (Act 85 of 1993). The Contractor shall provide written proof of compliance with such design code by the manufacturer or importer Furthermore; the Contractor shall submit certificates for every storage cylinder before bringing them onto site. Where no certificates have been issued, the Contractor shall submit a list of cylinders, including manufacturer, serial number, and standard together with a (SANAS) approved (AIA) Certificate of conformance (COC) The container valve assembly should be fitted with a pressure relief device complying with the appropriate national standards and be approved to TPED standard for transportable pressure vessels. All storage cylinders shall be supplied new, and all cylinders forming part the installation shall be of interchangeable without any modification whatsoever. Cylinder shipping shall be in accordance with the TPED code of the cylinders. Storage cylinders shall be shipped fully charged, and with an approved protective cap over the cylinder valve. Protective caps shall be removed only once cylinders have been finally bracketed into position. All protective caps shall be mounted on a traceable tag cap rack next to the cylinder bank. Storage cylinders shall be ins...
Sample 1
CYLINDERS. Buyer will not permit any other supplier to fill or otherwise handle in any way Seller cylinders and Buyer will indemnify Seller for claims of any kind related to use of the cylinders in any way other than storage of the gases supplied by Seller.[Xxxxx approved language]
Sample 1
CYLINDERS. (a) UC shall, at UC’s sole cost and expense: (i) Provide and/or reimburse SUPPLIER for the costs and expenses of any applicable certificates, permits, governmental or insurance company annual inspection fees for the services.
Sample 1
CYLINDERS. All cylinders shall be supplied full. Re-fill costs shall only apply following a delivery made after the initial Installation. The Supplier shall ensure that cylinders are either:
Sample 1
CYLINDERS. Customer shall provide the Cylinders for the Physical Delivery pursuant to an Order, or withdrawal by Physical Delivery from the Customer Product Account, of Enriched Product under Section 4.2 not later than *****. For any Book Transfer Delivery under Section 4.1, the Customer shall not provide Cylinders. *****.
Sample 1
CYLINDERS. (a) CUSTOMER shall not fill or refill any CYLINDER with any gas, liquid or solid, or permit any of them to be so filled or refilled except by Linde and shall promptly return to Linde all empty CYLINDERS, in good condition, with valves tightly closed. Credit will not be given for residual PRODUCT in any cylinder. (b) CUSTOMER shall at no time part with possession of or dispose of any CYLINDERS. CUSTOMER shall under no circumstances make or cause to be made any repairs or additions to CYLINDERS or their accessories, but if any are returned in a damaged condition or without any caps, fittings or valves, CUSTOMER shall promptly pay LINDE on demand for the actual cost to LINDE of making all necessary repairs and of replacing all missing parts, or Linde’s then current replacement value for the CYLINDERS if they are damaged beyond repair. (c) Linde may at any time demand that CUSTOMER return all CYLINDERS rented to CUSTOMER by Linde. Upon receiving a demand therefor from Linde, CUSTOMER shall return all CYLINDERS to Linde and shall promptly make payment to Linde, at Linde’s then current replacement value, for any or all CYLINDERS which are not returned to Linde within 10 days after demand therefor by Linde. However, ownership of all CYLINDERS so paid for shall remain in Linde, and if such CYLINDERS shall be subsequently returned to Linde by CUSTOMER, Linde agrees to refund to CUSTOMER all amounts paid therefor, less accrued rental for such CYLINDER at the rate specified in Linde 's published price list from the date payment was made by CUSTOMER until the date of return thereof to Linde and less the cost of any necessary repairs, except that Linde is not obligated to refund any amount paid by CUSTOMER for a CYLINDER that is damaged beyond repair at the time of its return to Linde. (d) Linde may at any time, upon reasonable notice, enter the premises of the CUSTOMER to verify the existence and condition of any or all CYLINDERS rented by CUSTOMER.
Sample 1
AutoNDA by SimpleDocs
CYLINDERS. The Customer agrees: a) all gas cylinders remain the property of Airefrig unless sold (subject to clause 3 above) to the Customer, in which case all liability, responsibility and regulatory requirements lay solely with the Customer; b) on request to return cylinders to Airefrig; c) to comply with all regulatory requirements in use and ownership of the cylinders; and d) to indemnify Airefrig for the full replacement cost of any cylinders not returned or damaged and against any liability arising from misuse or non-compliance with any regulations.
Sample 1

Related to CYLINDERS

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.

  • Containers The marine and intermodal cargo containers either owned or leased by the Borrower and employed by the Borrower in the conduct of its business, including, without limitation, refrigerated, dry van, tank, open top and flat rack containers and refrigeration units and generator sets associated therewith, but excluding any chassis for such containers.

  • Generators Temporary installation of generators, and permanent installation of generators that are placed inside existing buildings or that occupy an area under 50 square feet behind the building they serve.

  • Fabrication Making up data or results and recording or reporting them.

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • Fuel The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 per litre (which includes a service component).

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • Cleaning 8.1 CONTRACTOR shall, at his own expenses, at all times keep the premises free from accumulation of debris, waste materials, and rubbish, and at the completion of the work, he shall remove his tools and equipment and all surplus materials, debris, waste material, and rubbish and shall leave the premises in a neat and clean condition. If CONTRACTOR does not attend to such cleaning immediately upon request, OWNER shall have the right to have this work done by others and deduct the cost therefore from the payment due CONTRACTOR hereunder.

  • Moonlighting Employment as a physician in a professional capacity outside of what is outlined in this Agreement, whether temporary special medical activity (“TSMA”) or external moonlighting, must be approved in writing, in advance, by the Departmental Chair, Program Director and Director of Graduate Medical Education (or designee). Even if approved, professional and general liability insurance as outlined in Section 5.4 is not provided to Trainee engaged in external moonlighting. Trainee acknowledges he or she has the responsibility to obtain insurance for such engagement. TSMA and external moonlighting must be included and reported as part of Trainee's hours spent on clinical experience and education. Trainee shall not be required to engage in any outside work.

  • Smoke Detectors At Owner's expense, smoke detectors will be installed on the Property in working condition in accordance with the law prior to the tenant's occupancy. During the occupancy, it shall be the tenant's responsibility to maintain all smoke detectors. Owner will replace smoke detector equipment as needed.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!