Inspections; Tests. Borrower shall have provided copies of all inspection and test reports with respect to each Qualified Property included in Eligible Collateral made by or for Borrower or a Subsidiary Guarantor.
Inspections; Tests. The Contractor shall arrange for the inspections and tests referred to in the ITP Plan to be carried out and ensure that all inspection and testing are carried out as require by the Classification Society, and as may otherwise be required under this Agreement to discover any deviations from the Specifications, or any defects in the Works or the Sub-Contract Works. The Owner’s Representative shall have, during the repair, modification and conversion of the Vessel, the right to attend such tests and inspections of the Works and of the Sub-Contract Works to the extent provided in the GIMI Topsides Agreement.
Inspections; Tests. Access for inspection
Inspections; Tests. A. The Contractor shall conduct Safety, Efficiency and Maintained Conditions surveys, inspections and tests as follows:
Inspections; Tests. 10.9.1 The Contractor shall conduct Safety, Efficiency and Maintained Conditions surveys, inspections and tests as follows:
10.9.1.1 Semi-Annual quality control evaluations by a qualified supervisor to ensure and confirm the services and procedures as specified herein are properly executed relative to maintenance and performance standards for the systems serviced.
10.9.1.2 Mandated inspections and testing in accordance with ASME A17.1 Standards applicable per local law; filing of all procedures and payment of all relative fees per the Authority Having Jurisdiction (A.H.J.) and preparation of reports within the required time periods for the examination(s) rendered.
10.9.1.2.1 The MPHA retains the right to engage the services of a third- party qualified and certified agency for the sole purpose of witnessing mandated inspections and tests performed by the Contractor. Should the MPHA elect to utilize this provision, the Contractor shall conform to the third-party agency schedule and provide qualified labor at no additional charge to the MPHA.
10.9.1.3 If applicable, independent testing of Fire Emergency Operating Systems and/or Emergency Power System tests in accordance with local law requirements and ASME standards.
10.9.1.3.1 The MPHA retains the right to have these tests performed on a not-to-interfere basis at any hour of the day and any day of the week; and the cost for overtime work shall be limited to the premium labor portion for work performed on an overtime basis.
10.9.1.3.2 Failure to perform any code required testing during the month identified for the annual testing will result in a reduction of payment for that month and each subsequent partial or complete month, until the testing is performed, by 50%.
10.9.2 The Contractor shall annually conduct testing of the hoistway ventilation systems in all applicable buildings. The Contractor shall:
10.9.2.1 Verify operation of all lobby key switches and indicators.
10.9.2.2 Verify dampers fully open and close.
10.9.2.3 Notify MPHA of any system deficiencies and assist MPHA with any request to run the elevator to access equipment inside the hoistway.
10.9.2.4 Time requested to assist the MPHA shall be billed as an extra to the contract and billed at the Contractor’s hourly billing rates established by this agreement.
Inspections; Tests. Operating Borrower shall have provided copies of all material inspection and test reports with respect to each Qualified Property made by or for Operating Borrower or a Project Borrower, including, without limitation, a physical condition report (dated no earlier than twelve (12) months prior to the date of the applicable Qualified Property’s inclusion as Eligible Collateral) for each Qualified Property over five (5) years old as of the date of inclusion as Eligible Collateral.
Inspections; Tests. Materials shall, unless otherwise directed by the Engineer, be tested before leaving the manufacturer’s premises and the Contractor shall obtain and supply to the Engineer’s representative for his approval certificates from the manufacturer, showing that the materials have been tested according to the relevant specification or standard. The Contractor shall provide labor, where required, for tests carried out in accordance with the Contract.
Inspections; Tests. Contractor shall arrange for the inspections and tests in respect of any O&M FPSO Work and Services, work under a Variation Order, and other work performed by Contractor Group, including in any drydock or repair yard or otherwise and any other inspections or tests to be carried out by Contractor Group. Company may, at its own cost and risk, attend these inspections and tests on the FPSO or elsewhere. Contractor shall give Company prior written notice (sufficient to allow Company Group Personnel to be present) of any inspection or test to be conducted and of any changes to the time of any inspection or test. If Company is properly given prior written notice and Company Group Personnel fail to be present at an inspection or test, Contractor may nevertheless conduct the particular inspection or test; provided however, the Classification Society must certify all inspections and tests which may affect Classification Society requirements have complied with the applicable Classification Society rules. Company’s failure to witness any inspection or test shall not relieve Contractor of any obligations hereunder.
Inspections; Tests. Shop tests
Inspections; Tests. I. Subject to satisfactory reports of the following inspections/test at the Buyer’s expense: YES WAIVED (Initial) YES WAIVED (Initial) TERMITE/ OTHER INSECTS SEPTIC WATER WELL/ORGANIC CHEMICALS RADON – AIR/WATER TENNIS COURT OIL TANK LEAD ASBESTOS
