Outline Specification Sample Clauses

Outline Specification. The Consultant shall prepare an outline specification in Construction Specification Institute format which will describe the Consultant requirements, earthwork, utility adjustments and relocations, substructure restoration, superstructure restoration, drainage, foundations restoration, mechanical, electrical, utilities, lighting, signalization, signage, markings, external finishes, interior historic finishes restoration, painting, security systems, fire protection systems, plumbing, and other incidental and special equipment being proposed for the Project, all of which will be considerations in the cost estimate.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Outline Specification. ANNEXURE 6..............................................................
Sample 1
Outline Specification. Design Conditions Heating and air conditioning systems will be capable of maintaining inside temperatures of 72 degrees Fahrenheit at -10 degrees Fahrenheit outside winter conditions and 72 degrees Fahrenheit dry bulb inside at 92 degrees Fahrenheit dry bulb and 75 degrees Fahrenheit wet bulb outside summer conditions. Loading area and mechanical/electrical room areas will be heated to 60 degrees Fahrenheit at -10 degrees Fahrenheit winter conditions. Ventilation air from the· outside will be provided at a minimum of 20 CFM per person for up to 1050 people (21,000 cfm) or in sufficient quantity to make-up all required exhaust, whichever is greater. Humidification is not included within the scope of this specification. For load calculations, the average occupancy has been based on 142 usable square feet per person and 5.0 xxxxx per square foot for lighting, equipment and miscellaneous loads over 150,000 assumed usable square feet. Air-Conditioning & Heating System Description The following HVAC system is included: VAV Packaged Rooftop System The air conditioning system will utilize weather proof, insulated, roof mounted, packaged, variable air volume cooling and ventilating units. The units will have a direct expansion cooling coil; air cooled condensing unit with capacity control; two (2) sets of throw-away filters; and an enthalpy economizer cycle, with exhaust fan, permitting the use of outside air for cooling at favorable outside dry bulb temperature and relative humidity. Rooftop units will be screened as necessary to meet Code. The rooftop units will be equal to XxXxxx or Trane. The system air volume will vary in response to a system static pressure controller. Computer rooms, or any other room requiring dedicated HVAC systems, will be provided as part of the tenant improvement allowance. The base building HVAC cooling system may be used to supplement and/or back- up the special area systems. The base building cooling load is based on approx. one (1) ton per 320 rentable square feet (excluding lower level) for a total of 500 tons. The Base Building HVAC system will consist of rooftop VAV units, main supply ductwork, return plenum, six (6) fan powered VAV boxes with electric heat on the 2nd and 4th floors, four (4) tan powered VAV Outline Specification boxes with electric heat on the 3rd floor and (1) one fan powered VAV box with electric heat on the 1st floor. Each of the fan powered YAV boxes provide temporary heat and are equipped with localized the...
Sample 1
Outline Specification. Security System Security system is included within the Base Building scope of work to provide for Base Building entry door card readers, garage entry card reader, fire monitoring, elevator monitoring, elevator traveling cable security capability and other security items as required for the base building plus expansion capability for tenant security needs. Fire Alarm System Fire Alarm System - A complete UL approved fire management system consisting of a fire command station, pull alarm detection system, xxxx alarms, strobe lighting and a fire department telephone communication system will be provided as part of the Base Building scope for the common areas. The system will monitor sprinkler flow, isolating valves, smoke detectors, and individual pull alarms.
Sample 1
Outline Specification. The Outline Specification is contained on the CD attached and the documents detailed in this schedule SCHEDULE 7 Pre-Development Obligations
Sample 1

Related to Outline Specification

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Specification 2.1 The Service Provider shall fully comply with the terms of this Agreement and, is subject to the Specification in Schedule 1.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

  • Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • Statement of Work The Contractor shall provide the services and staff, and otherwise do all things necessary for or incidental to the performance of work, as set forth below:

  • Work Schedule A 4/10 work schedule is four (4) ten hour days in a seven (7) day period, for a total of forty (40) hours per week.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!