Roads & Maritime Services Approved Pesticides List Sample Clauses

Roads & Maritime Services Approved Pesticides List. Approved Pesticides List Wherever possible, Roads and Maritime follows an integrated pest management program that aims to use best practice and cost effective techniques with minimal impacts on the environment. Roads and Maritime selects from a variety of control techniques depending on the targeted pest species and the receiving environment. Pesticides are one of the control techniques used in the Roads and Maritime integrated pest management program that are particularly effective for managing weeds and roadside vegetation in conjunction with mechanical control techniques. When used correctly, pesticides have minimal social and environmental impacts. The following list details pesticide active ingredients that are approved by Roads and Maritime for use by its staff and contractors in outdoor public places where the maintenance of the land on which the pesticides are to be applied is the responsibility of Roads and Maritime. The pesticides are to be applied in accordance with label conditions and any notes for application as detailed in this list. Approved insecticides Approved for the purpose of termite control in timber wharf structures. Active ingredient Purpose Poisons schedule1 Potential impact on aquatic species Off target potential Triflumuron Termite control in timber wharf structures S5 Dangerous to non-target insects, fish, yabbies, and other aquatic and soil arthropods. Chlorfluazuron Termite control Not scheduled Harmful to aquatic organisms. This product can be hazardous to small aquatic arthropods. Hexaflumuron Termite control Not scheduled Moderately to highly toxic to fish and other aquatic organisms. Hexaflumuron is non-toxic to birds, earthworms and soil micro-organisms. 1 Poisons schedule as per The Department of Health, Therapeutic Goods Administration Poisons Standard, xxxx://xxx.xxx.xxx.xx/xxxxxxxxxxx/xxxxxxx-xxxxxxxx­ susmp#susmp Approved herbicides Herbicides approved for control of roadside weeds and vegetation. Herbicide active ingredient and MOA Group2 Example product Name Main weeds controlled Persistence in the soil (half-life) Poisons schedule3 Mobility in soil Potential impact on aquatic species Off target potential Glyphosate (various salts) Group M Roundup® Grasses and broadleaf plants 25-47 days Herbicide is tightly bound to clay particles, so no residual activity. S5 Low Glyphosate has low toxicity to aquatic species. Some formulation ingredients have higher toxicity. Only certain formulations can be used near waterways....
AutoNDA by SimpleDocs

Related to Roads & Maritime Services Approved Pesticides List

  • Drug and Alcohol Testing – Safety-Sensitive Functions A. Employees required to have a Commercial Driver’s License (CDL) are subject to pre-employment, post-accident, random and reasonable suspicion testing in accordance with the U.S. Department of Transportation rules, Coast Guard Regulations (46 CFR Part 16) or the Federal Omnibus Transportation Employee Testing Act of 1991. The testing will be conducted in accordance with current Employer policy.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria

  • Fire, Life Safety, and Accessibility Codes The following codes, in the versions approved by the Georgia State Fire Marshal/Fire Safety Commissioner and Department of Human Resources, shall be used. The Design Professional will designate any additional codes or special modifications in the Supplementary General Conditions.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.

  • Required Procurement Procedures for Obtaining Goods and Services The Grantee shall provide maximum open competition when procuring goods and services related to the grant-assisted project in accordance with Section 287.057, Florida Statutes.

  • Procurement Plan 8. The Borrower shall update the Procurement Plan as needed throughout implementation of the Project, and on each anniversary of the Effective Date, the Borrower shall in consultation with ADB determine whether the Procurement Plan needs to be updated. The Borrower shall implement the Procurement Plan in the manner in which it has been approved by ADB.

  • Specialty Prescription Drugs (+ Prorated copayments for a shorter supply period may apply for network pharmacy only. See Prescription Drug section for details. When purchased at a Specialty Pharmacy (+): For maintenance and non-maintenance prescription drugs, a copayment applies for each 30-day period (or portion thereof) within the prescribeddosing period. Tier 5: $125 Not Covered When purchased at a Retail Pharmacy (+): For maintenance and non-maintenance prescription drugs, a copayment applies for each 30-day period (or portion thereof) within the prescribeddosing period. Specialty Prescription Drugs purchasedat a retail pharmacy will require a significantly higher out of pocket expense than if purchased from a Specialty Pharmacy. Our reimbursement is based on the pharmacy allowance. Tier 5: 50% Not Covered When purchased at a Mail Order Pharmacy: Not Covered Not Covered Covered Benefits Network Pharmacy Non-network Pharmacy (+) Preauthorization is required for thisservice. Please see Preauthorization in Section 3 for more information. You Pay You Pay Infertility Prescription Drugs - Three(3) in-vitro cycles will be covered per plan year with a total of eight (8) in-vitro cycles covered in a member’s lifetime. When purchased at a Specialty, Mail Order, or Retail Pharmacy Tier 1: 20% Not Covered Tier 2: 20% Not Covered Tier 3: 20% Not Covered Tier 4: 20% Not Covered When purchased at a Specialty Pharmacy (+) Tier 5: 20% Not Covered When purchased at a Retail Pharmacy (+): Specialty Prescription Drugs purchased at a retail pharmacy will require a significantly higher out of pocket expense than if purchased from a specialty pharmacy. Tier 5: 20% Not Covered Contraceptive Methods- Preventive Coverage includes barrier method (diaphragmor cervical cap), hormonal method (birth control pill), and emergency contraception. For non-preventive contraceptive prescription drugs and devices, the amount you pay will depend on the tier placement of the contraceptive prescription drug or device. See above for details. When purchased at a Retail Pharmacy: Up to a 365-day supply of contraceptive prescription drugs is available at all network retail pharmacies. For more information about this option, visit our website. Tier 1: $0 Not Covered When purchased at a Mail Order Pharmacy: Up to a 90-day supply. Tier 1: $0 Not Covered

  • Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.

  • Procurement Planning Prior to the issuance of any invitations to bid for contracts, the proposed procurement plan for the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Guidelines. Procurement of all goods and works shall be undertaken in accordance with such procurement plan as shall have been approved by the Association, and with the provisions of said paragraph 1.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!