Construction Noise. The Certificate Holder shall use construction techniques and BMPs to minimize potential impacts of construction related noise. In particular, construction of the Project shall be performed in accordance with mitigation items identified in the Revised MDNS and Section 4.16a.D of the Revised Application.
Construction Noise. The Certificate Holder and its contractors and subcontractors shall use industry standard noise attenuation controls during construction to mitigate noise impacts and shall comply with applicable state and local noise emission regulations. The Certificate Holder shall limit loud construction activities to daytime hours (7 a.m. to 10 p.m.), and shall comply with the applicable requirements of WAC 000-00-000 (2) (b) during the hours of 10:00 p.m. and 7:00 a.m.
Construction Noise. The Tenant shall ensure that minimal noise (including without limitation noise caused by drilling, hammering or sawing) relating to the Tenant’s alterations, including the Tenant’s Work escapes the Premises during Normal Business Hours. Should the Landlord receive complaints from other tenants in the Building the Tenant shall use its best efforts to eliminate the noise.
Construction Noise. The excavation, demolition, erection, construction, alteration or repairs of any premises or structure between hours of 9:00pm and 7:00am except in emergency situations is permitted.
Construction Noise. The Eastern Shore is a growing resort community. If you lease a Property near new construction, please be tolerant of the possible additional noise and other concerns. Please realize that this situation is a matter beyond our control. We will make every effort to contact the contractor concerning this situation, but no refunds or moves will be made.
Construction Noise. The Certificate Holder and its contractors and subcontractors shall use industry standard noise attenuation controls during construction to mitigate noise impacts and shall comply with applicable state and local noise emission regulations, and the following requirements:
Construction Noise. To minimize the noise emissions during the construction phase of the Project, the following mitigation measures are proposed: • Use quieter plants and working methods; and • Use movable barrier, noise enclosure and noise reduction fabric.
Construction Noise. 3.4.1 Noise will mainly be generated by diesel generators, air filtering appliances and trucks for hauling asbestos waste out of the site throughout the project period. However, the project site is remote from sensitive receivers and all planned site activities will not be carried out in the restricted hours (i.e. from 1900 to 0700 everyday and whole day during general holidays including Sundays) under the Noise Control Ordinance. Significant noise impact of the project is not anticipated.
Construction Noise. 6.1.2.1 The NCO provides the statutory framework for noise control in Hong Kong. Assessment procedures and standards are set out in the respective TM promulgated under the NCO.
Construction Noise. The Certificate Holder and its contractors and subcontractors shall use industry standard noise attenuation controls during construction to mitigate noise impacts and shall comply with applicable state and local noise emission regulations. The Certificate Holder shall limit blasting and loud construction activities to daytime hours (7 a.m. to 10 p.m.), and shall comply with the applicable requirements of WAC 000-00-000 during the hours of 10:00 p.m. and 7:00 a.m. The Certificate Holder shall ensure that oversized loads as defined by Washington Department of Transportation associated with Project Construction do not travel through the City of Kittitas during evening or nighttime hours, and that haul trucks do not park and idle within 100 feet of a residential dwelling.
