Contractor Warranty and Maintenance. Project maintenance includes, but is not limited to, watering, cultivating, weeding, pruning, repairing, adjusting guys and stakes, and performing other work as ordered by the Engineer until final acceptance.
Contractor Warranty and Maintenance. General Provisions 101 through 150. 670.4 Measurement Incidentals including excavation, rock removal, backfilling, disinfection, testing, temporary water connections, pavement removal, pavement replacement, and other incidentals required for the installation of water distribution items are not measured for separate payment and shall be included in the applicable Pay Items below. Water mains, service lines, and other associated Items of work in this Specification, complete, in place, and accepted, are measured for payment as follows:
Contractor Warranty and Maintenance. General Provisions 101 through 150.
Contractor Warranty and Maintenance. The polymer manufacturer and the Contractor, by acceptance of the work described in this Specification, shall jointly agree to guarantee the wearing surface against all defects incurred during normal traffic use for a period of ten years. Submit this agreement in writing to the Engineer signed by both the polymer manufacturer and the Contractor. Commence the ten year period on the date of acceptance of the work. The guarantee shall cover all labor and materials required by the Department to satisfactorily repair and replace the wearing surface.
Contractor Warranty and Maintenance. Whether the building is owned, leased, or rented, the Contractor who provides the building retains possession of each office building. Provide regular maintenance to the facility, to include weed control and pest control. The Engineer will control the use, location, relocation, and removal of the building. When the building is no longer needed, remove each building from the Project at the Engineer’s direction. Retain possession of all items that are required as part of the Field Office when the Engineer determines that these items are no longer needed.
Contractor Warranty and Maintenance. Georgia Department of Transportation Standard Specifications, General Provisions 101 through 150. Provide a warranty in writing, for a period of sixty (60) months after successful completion and acceptance of the project, for all CFRP concrete strengthening work against defective material and workmanship. Furnish the written warranty to the Department for approval prior to installation of the proposed CFRP system. The warranty is subject to transfer from the Department to the County.
Contractor Warranty and Maintenance. General Provisions 101 through 150.660.4 Measurement Incidentals including excavation, rock removal, backfilling, flushing, testing, temporary water connections, pavement removal, pavement replacement, and other incidentals required for the installation of sanitary sewer items are not measured for separate payment and shall be included in the applicable Pay Items below. Gravity sewer mains, manholes, force mains, and laterals, and associated items of work in this Specification, complete, in place, and accepted, are measured for payment as follows:
Contractor Warranty and Maintenance. Maintain the erosion control features installed to: Contain erosion within the limits of the right-of-way Control storm water discharges from disturbed areas Effectively install and maintain the erosion control features. Ensure these features contain the erosion and sediment within the limits of the rights of way and control the discharges of storm-water from disturbed areas to meet all local, state, and federal requirements on water quality. If a construction Project has separate contractors, the Prime Contractor shall maintain the erosion control features at grading sites as acceptable to the Engineer until the Contract is accepted. If any erosion control devices are damaged by any contractor either by neglect, by construction methods, or any other reasons, including acts of nature, they shall be repaired within 24 hours by the Prime Contractor at no cost to the Department.
Contractor Warranty and Maintenance. General Provisions 101 through 150 149.4 Measurement This item is not measured for payment.
Contractor Warranty and Maintenance. Transmit a copy of the manufacture’s standard five-year performance warranty on each installation to the Bridge Maintenance Unit and the Contractor. The Contractor by acceptance of the work described in this Specification, shall guarantee, to replace defective joint installations due to adhesive or cohesive failure, and failure under normal traffic for a period of (3) three years. Commence the (3) year period on the date of the acceptance of the work. This guarantee shall cover all labor and materials required by the Department to satisfactorily repair and replace defective bridge joints. Transmit a copy of this agreement to the Bridge Maintenance. Revised: N/A First Use Date: January 26, 2023 DEPARTMENT OF TRANSPORTATION STATE OF GEORGIA SPECIAL PROVISION P.I. No: 0015544 Floyd County Section 500─Concrete Structures Add the following to Subsection 500.1.01: Self-Consolidating Concrete (SCC): a highly workable concrete that can flow through dense reinforcement under its own weight and adequately fill voids without segregation or excessive bleeding without the need for vibration. High Performance Self-Consolidating Concrete (HPC-SCC): a highly workable concrete that can flow through dense reinforcement under its own weight and adequately fill voids without segregation or excessive bleeding without the need for vibration. Add the following to Subsection 500.1.02.A: Section 831―Admixtures Add the following to Subsection 500.1.02.B: AASHTO R 81 AASHTO T 277 AASHTO T 358 ASTM C1610 ASTM C 138 ASTM C 231 ASTM C 1611 ASTM C 1621 ASTM C 1712 ASTM C 1758
