Installation of Product Sample Clauses

Installation of Product. 20% If there is no representative in any of the territories where the events described in clause (1), (2) or (3) above take place, then the payment which would have been made to such representative shall be retained by Ilios. To eliminate dispute, documents (e.g., quotations, correspondence or specifications) relevant to the sale must promptly be sent to Ilios to substantiate a claim by the Representative to a share of commission payments. Ilios reserves the right, in its sole discretion, to establish, and from time to time to change, its policy for determining what elements will be considered in the division of compensation among representatives and territories and the amount of compensation to be allocated to each. The decision of Ilios on the application of the above rules or any revised rules to any particular order shall be final and binding on the Representative. Ilios shall use its best efforts, prior to or concurrently with the quotation of an order, to notify the Representative that the commissions on such order may be split and to indicate the basis for such split (subject to revision upon the acceptance of the order). In an event shall the total commissions, which Ilios is required to pay on a single order, exceed the amount of the commission payable pursuant to Paragraph 5. The Representative shall have the right to solicit the sale of all Ilios products and services set forth in Appendix “A” in the marketing territory of the New England States including Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine. The marketing territory shall also include all the nations in the European Union. The parties agree to the following list of “Excluded Customers”. 1. Any customer who purchases or installs any equipment for: a. Any Ilios research and development project. b. Any Ilios field demonstration unit. c. Any research and development project of a customer of Ilios.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Installation of Product. Vendor shall provide information regarding installation procedures (“Installation Information”) with the Product or upon request by BTE. Installation Information shall include plans for managing the installation process, logistical aspects of the installation, and storage or delivery requirements respecting installation. For any installation that BTE requires, Vendor shall issue a quotation to BTE for the installation of the Product. BTE may issue a Procurement Document for installation Services pursuant to the quotation under an agreed Procurement Document or Statement of Work and based on an agreed upon scope of work. If Vendor installs the Product, it will do so on or before the Installation Date and in accordance with the Installation Information and/or the applicable Statement of Work and all relevant professional and industry standards. Installation of the Product by BTE or its designee(s) shall not relieve Vendor of any other obligation under this Agreement; provided that such installation by BTE or its designee(s) is done by experienced and qualified personnel in accordance with (i) the applicable specifications and Installation Information for the Product and (ii) all relevant professional and industry standards.
Sample 1Sample 2Sample 3
Installation of Product. The Contracted Supplier or Authorized Dealer must take precautions during the installation of any product not to damage the premises or the property of the Purchasing Entity. If damages do occur as a result of operations under this contract, the Contracted Supplier or Authorized Dealer is responsible for ensuring that the affected area/item(s) are returned/restored to their original condition or the Contracted Supplier or Authorized Dealer must make restitution, as agreed upon by the parties. a. The Contracted Supplier or Authorized Dealer must be fully responsible for the assembly team and the supervision of the team. b. The Contracted Supplier or Authorized Dealer is responsible for ordering any missing, damaged, or incorrect items upon discovery. c. The Purchasing Entity must incur no additional charges as a result of the Contracted Supplier or Authorized Dealer’s error or omission. d. The Purchasing Entity reserves the right to hire or make arrangements for additional cleaning personnel if the Contracted Supplier, after notification and request for correction, is not able to properly clean and ready the site for occupation by the designated move in date. e. The cost of additional cleaning must be fully reimbursed by the Contracted Supplier or Authorized Dealer if the Contracted Supplier or Authorized Dealer does not correct the issue promptly to allow for occupation of the site on the designated move in date. f. Installation must happen in a manner that allows assembly and disassembly to occur with minimal disruption, time, noise volume, and space usage. g. The Contracted Supplier or Authorized Dealer must offer Design Services as described in Section 2.14.
Sample 1Sample 2
Installation of Product. The Agent shall provide installation service of the Product to all customers.
Sample 1
Installation of Product. ASTI shall advise GAS as to the method and installation of the Products, which shall be mandatory.
Sample 1
Installation of Product. Installation of the purchased Products with Customers shall be performed by Gen-Probe or its Affiliates or distributors at their expense.
Sample 1
Installation of Product. Product requires professional installation, which will be provided by the Seller. An installation charge is included into the Purchase price. Seller is not responsible for any damages due to any attempted installation or relocation of the Product by the Purchaser.
Sample 1
AutoNDA by SimpleDocs
Installation of Product. ASTI shall advise AGS as to the method and installation of the Products, which shall be mandatory.
Sample 1
Installation of Product 
Sample 1

Related to Installation of Product

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling one or more service or installation visits, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the equipment or parts in the required locations at no additional charge, unless otherwise specified in the Price Sheets. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the equipment or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the equipment or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Installation and Use You may install and use the Software only for the number of licenses acquired by you. In order to exercise your rights to the Software under this Agreement, you must activate your copy of the Software in the manner described during the launch sequence.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Maintenance of Equipment The Equipment shall be maintained in good operating condition and repair (reasonable wear and tear excepted) and all necessary replacements of and repairs thereto shall be made so that the value and operating efficiency of the Equipment shall be maintained and preserved. No Borrower shall use or operate the Equipment in violation of any law, statute, ordinance, code, rule or regulation. Each Borrower shall have the right to sell Equipment to the extent set forth in Section 4.3 hereof.

  • Supply and Maintenance of Equipment It is the responsibility of the Employer to furnish and maintain all equipment, machinery and supplies required by employees in the performance of their duties. Employees shall not suffer any loss in salary in the event that they cannot carry out their normal duties by reason of the Employer failing to properly maintain equipment, machinery or supplies or by reason of power failures or other circumstances not attributable to the employees.

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.

  • MAINTENANCE, REPAIRS, OR ALTERATIONS The Tenant shall, at their own expense and at all times, maintain premises in a clean and sanitary manner, and shall surrender the same at termination hereof, in as good condition as received, normal wear and tear excepted. The Tenant may not make any alterations to the leased premises without the consent in writing of the Landlord. The Landlord shall be responsible for repairs to the interior and exterior of the building. If the Premises includes a washer, dryer, freezer, dehumidifier unit and/or air conditioning unit, the Landlord makes no warranty as to the repair or replacement of units if one or all shall fail to operate. The Landlord will place fresh batteries in all battery-operated smoke detectors when the Tenant moves into the premises. After the initial placement of the fresh batteries it is the responsibility of the Tenant to replace batteries when needed. A monthly "cursory" inspection may be required for all fire extinguishers to make sure they are fully charged.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!