Maintenance, Modification and Updating Sample Clauses

Maintenance, Modification and Updating. Service Provider shall maintain the Service Management Manual so as to be accessible electronically to DIR, the DIR Customers and Authorized Users via the Portal or such other electronic means as approved by DIR, and in any case in a manner consistent with DIR's security policies. Service Provider shall communicate to all DIR Customers the availability of and methodology for accessing the Service Management Manual. DIR shall have the right, but not the obligation, to distribute hard copies of the Service Management Manual to Authorized Users. Service Provider shall promptly and timely modify and update the Service Management Manual to reflect changes in the operations or procedures described therein and to comply with DIR Standards, DIR Rules, the Technology Plan and Strategic Plans. Service Provider shall provide the proposed changes in the Service Management Manual to DIR for DIR's prior review, comment and approval, which DIR may withhold in its sole discretion. Service Provider will retain previous versions of the Service Management Manual and will provide DIR access to such previous versions along with a method to track all changes made to prior versions (version tracking).
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
Maintenance, Modification and Updating. Supplier shall promptly modify and update the Policy and Procedures Manual to reflect changes in the operations or procedures described therein, to reflect changes in the work to be performed, and to comply with VITA Rules. Supplier shall provide the proposed changes in the manual to VITA for review, comment and written approval. Supplier shall maintain the Policy and Procedures Manual so as to be accessible electronically to VITA and Customer management and Users via a secure web site in a manner consistent with VITA’s security policies.
Sample 1Sample 2Sample 3
Maintenance, Modification and Updating. Supplier shall promptly modify and update the Policy and Procedures Manual to reflect changes in the operations or procedures described therein, to reflect new Supplements or other changes in the work to be performed, and to comply with Ascension Health Standards, Ascension Health Rules, the Technology and Business Process Plan and Strategic Plans as described in Sections 9.5 and 9.
Sample 1Sample 2
Maintenance, Modification and Updating. Integrated Supplier shall promptly modify and update the Policy and Procedures Manual to reflect changes in the operations or procedures described therein, to reflect changes in the work to be performed, and to comply with DMAS Rules. The Integrated Supplier shall provide the proposed changes in the manual to DMAS for review, comment and written approval. Integrated Supplier shall maintain the Policy and Procedures Manual so as to be accessible electronically to DMAS and Business Partner and Customer management and Users via a secure web site in a manner consistent with DMAS’s security policies.
Sample 1Sample 2
Maintenance, Modification and Updating. Service Provider shall maintain the Service Management Manual so as to be accessible electronically to TxDOT and Authorized Users via the Portal or such other electronic means as approved by TxDOT, and in any case in a manner consistent with TxDOT's security policies. Service Provider shall communicate to TxDOT the availability of and methodology for accessing the Service Management Manual. TxDOT shall have the right, but not the obligation, to distribute hard copies of the Service Management Manual to Authorized Users. Service Provider shall promptly and timely modify and update the Service Management Manual to reflect changes in the operations or procedures described therein and to comply with TxDOT Standards, TxDOT Rules, the Technology Plan and Strategic Plans. Service Provider shall provide the proposed changes in the Service Management Manual to TxDOT for TxDOT's prior review, comment and approval, which TxDOT may withhold in its sole discretion. Service Provider shall retain previous versions of the Service Management Manual and shall provide TxDOT access to such previous versions along with a method to track all changes made to prior versions (version tracking).
Sample 1
Maintenance, Modification and Updating. Provider shall promptly modify and update the Process and Procedures Manual to reflect changes in the operations or procedures described therein, to reflect new Statement of Works, Client Policies and Procedures or other changes in the work to be performed. Provider shall provide the proposed changes in the manual to Client for review, comment and approval. Provider shall maintain the Process and Procedures Manual so as to be accessible electronically to Client management via a secure web site in a manner consistent with Client’s security policies.
Sample 1
Maintenance, Modification and Updating. Supplier maintain the Policy and Procedures Manual so as to be accessible electronically to Hercules management and Authorized Users via a secure web site in a manner consistent with Hercules' security policies. Supplier shall promptly modify and update the Policy and Procedures Manual monthly to reflect changes in the operations or procedures described therein and to comply with Hercules Standards, the Technology and Business Process Plan and Strategic Plans as described in Section 9.
Sample 1
AutoNDA by SimpleDocs
Maintenance, Modification and Updating. Supplier shall maintain the Policy and Procedures Manual so as to be accessible electronically to New Century management and Authorized Users via a secure web site in a manner consistent with New Century’s security policies. Supplier shall promptly modify and update the Policy and Procedures Manual monthly to reflect changes in the operations or procedures described therein and to comply with New Century Standards, the Technology and Business Process Plan and Strategic Plans as described in Section 9.5. Supplier shall provide the proposed changes in the manual to New Century for review, comment and approval. To the extent any such change poses a non-trivial risk of (i) increasing New Century’s total costs of receiving the Services (as described in Section 9.6(c)(i)); (ii) having a non-trivial adverse impact or require changes, as described in Section 9.6(c)(ii)-(vi), or (iii) violating or being inconsistent with the New Century Standards or Strategic Plans (as described in Section 9.6(c)(vii)), Supplier shall not implement such change without first obtaining New Century’s approval, which New Century may withhold in its sole discretion.
Sample 1
Maintenance, Modification and Updating. Supplier shall promptly modify and update the Policy and Procedures Manual to reflect changes in the operations or procedures described therein, to reflect changes in the work to be performed, and (except as expressly set forth herein with respect to Managed Services (e.g., in Section 9.5 and 9.6 (other than Section 9.5(a)(i) with respect to compliance with the CoreLogic Policy Sets in the performance of all Services))) to *** as described in ***. Changes to the Services resulting from changes to CoreLogic Standards (including the CoreLogic Information Security Policy Set and CoreLogic Compliance Policy Set), CoreLogic Rules, the Technology and Business Process Plan, CoreLogic Information Security Policy Set and CoreLogic Compliance Policy Set and Strategic Plans shall be subject to Section 4.
Sample 1

Related to Maintenance, Modification and Updating

  • Compliance; Modification The Asset Representations Reviewer will cooperate with and provide information to the Issuer regarding the Asset Representations Reviewer’s compliance with this Section 4.10. The Asset Representations Reviewer and the Issuer agree to modify this Section 4.10 as necessary from time to time for either party to comply with applicable law.

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Integration and Modification This Agreement sets forth the entire understanding and agreement of the Parties with respect to the subject matter of this Agreement and supersedes all prior agreements, understandings, negotiations, and communications, whether oral or written, with respect to such subject matter. Neither this Agreement, nor any provision or term of this Agreement, may be amended, modified, revoked, supplemented, waived, or otherwise changed except by a writing signed by all of the Parties.

  • Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.

  • Cost Modifications The parties may agree to a reduction in the cost of the Contract at any time during which the Contract is in effect. Without intending to impose a limitation on the nature of the reduction, the reduction may be to hourly, staffing or unit costs, the total cost of the Contract or the reduction may take such other form as the State deems to be necessary or appropriate.

  • Contract Modifications It is understood that changes are inherent in operations of the type covered by this contract. The number of changes, the scope of those changes, and the impact they have on the progress of the original operations cannot be defined at this time. The PURCHASER is notified that changes are anticipated and that there will be no compensation made to the PURCHASER directly related to the number of changes made. Each change will be evaluated for extension of contract time and increase or decrease in compensation based on its own merit. STATE reserves the right to make, at any time during the contract, such modifications as are necessary or desirable; provided such modifications shall not change the character of the operations to be done nor increase the cost, unless such operations or cost increase is approved in writing by PURCHASER. Any modifications so made shall not invalidate this contract nor release PURCHASER of obligations under the performance bond. PURCHASER agrees to do the modified operations as if it had been a part of the original contract. If any change under this section causes an increase or decrease in the PURCHASER's cost of, or the time required for the performance of any part of the operations, the PURCHASER must submit a written statement setting forth the nature and specific extent of the claim. Such claim shall include all time and cost impacts against the contract and be submitted as soon as possible, but no later than 30 days after receipt of any written notice of modification of the contract. If the PURCHASER discovers site conditions which differ materially from what was represented in the contract or from conditions that would normally be expected to exist and be inherent to the activities defined in the contract, the PURCHASER shall notify the STATE's Authorized Representative immediately and before the area has been disturbed. The STATE's Authorized Representative will investigate the area and make a determination as to whether or not the conditions differ materially from either the conditions stated in the contract or those which could reasonably be expected in execution of this particular contract. If it is determined that a differing site condition exists, any compensation or credit will be determined based on an analysis by STATE's Authorized Representative. If the PURCHASER does not concur with the decision of the STATE's Authorized Representative and/or believes that it is entitled to additional compensation, the PURCHASER may proceed to file a claim. All claims shall be submitted in writing and shall include a detailed, factual statement of the basis of the claim, pertinent dates, contract provisions which support or allow the claim, reference to or copies of any documents which support the claim, the exact dollar value of the claim, and specific time extension requested for the claim. If the claim involves operations to be completed by subcontractors, the PURCHASER will analyze and evaluate the merits of the subcontractor's claim. PURCHASER shall forward the subcontractor's claim and PURCHASER's evaluation of such claim to STATE's Authorized Representative. The STATE's Authorized Representative will not consider direct claims from subcontractors, suppliers, manufacturers, or others not a party to this contract. The decision of the STATE shall be final and binding unless the PURCHASER requests mediation.

  • Commercial Operation Date Testing and Modifications Prior to the Commercial Operation Date, the Connecting Transmission Owner shall test the Connecting Transmission Owner’s Attachment Facilities and System Upgrade Facilities and System Deliverability Upgrades and Developer shall test the Large Generating Facility and the Developer Attachment Facilities to ensure their safe and reliable operation. Similar testing may be required after initial operation. Developer and Connecting Transmission Owner shall each make any modifications to its facilities that are found to be necessary as a result of such testing. Developer shall bear the cost of all such testing and modifications. Developer shall generate test energy at the Large Generating Facility only if it has arranged for the injection of such test energy in accordance with NYISO procedures.

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Amendment, Modification and Supplement Upon amendment, modification and supplement of this Contract shall be subject to the written agreement executed by each party.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!