PHASE III - CONSTRUCTION DOCUMENTS PHASE Sample Clauses

PHASE III - CONSTRUCTION DOCUMENTS PHASE. The ARCHITECT’S/ENGINEER’S Basic Services in Phase III - Construction Documents Phase of a Project shall be as provided below in Sections 4.6.1 through 4.6.7. 4.6.1 The ARCHITECT/ENGINEER shall prepare from the approved Design Documents, for approval by the OWNER, Construction Documents consisting of Drawings and Specifications setting forth in detail the requirements for the base bid and ARCHITECT/ENGINEER initiated alternate bids for construction of the Project. The Construction Documents will include, as applicable to the Project, general work, mechanical work, electrical work, elevators, laboratory casework, energy management, CCTV, telephone and computer networks, and all other work required for construction of the Project. 4.6.2 The ARCHITECT/ENGINEER shall assist the OWNER in preparation of the necessary bidding documents and the documents which will comprise the contract to be entered into between the OWNER and the Contractor for construction of the Project using OWNER approved standardized forms where practicable(the Construction Documents). 4.6.3 The ARCHITECT/ENGINEER shall assist the OWNER in filing the required documents for the approval of governmental authorities having regulatory jurisdiction over the Project. 4.6.4 The ARCHITECT/ENGINEER shall provide three (3) sets of the Construction Documents to the OWNER for final review at completion of Phase III - Construction Documents Phase. 4.6.5 The ARCHITECT/ENGINEER will notify the OWNER of those items required for early order or delivery so that a Project is not delayed, and will provide the OWNER with the necessary drawings and specifications required for separate bidding of such items. 4.6.6 At the completion of Phase III - Construction Documents Phase, prior to releasing the Construction Documents for bid, the ARCHITECT/ENGINEER shall provide a written estimate of construction cost and total cost for the Project to the OWNER for the OWNER'S written approval. Such estimates will be provided using industry standard CSI format cost data and categories on an estimate form provided by the OWNER. The estimate of construction cost shall be based on a detailed unit cost estimate. 4.6.7 The ARCHITECT/ENGINEER shall not proceed with Phase IV - Bid Phase until the Construction Documents have been approved in writing by the OWNER.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
PHASE III - CONSTRUCTION DOCUMENTS PHASE. Based on the approved Design Development documents and approval of DD Probable Cost Estimate within the established construction budget, VAI will proceed with the Construction Document phase. XXX’s scope of work during this phase will be to prepare the final Construction Documents and coordinate the work of the consultants for UNTS approval, consisting of drawings, specifications, and details necessary to construct the project. In accordance with the Professional Service Agreement we will provide two (2) sets of documents for review and approval at 50% and 95%:
Sample 1
PHASE III - CONSTRUCTION DOCUMENTS PHASE. The ARCHITECT'S Basic Services in Phase III - Construction Documents Phase of a Project shall be as provided below in Sections 4.6.1 through 4.6.7. 4.6.1 The ARCHITECT shall prepare from the approved Design Documents, for approval by the OWNER, Construction Documents consisting of Drawings and Specifications setting forth in detail the requirements for the base bid and ARCHITECT initiated alternate bids for construction of the Project. The Construction Documents will include, as applicable to the Project, general work, mechanical work, electrical work, elevators, laboratory casework, energy management, CCTV, telephone and computer networks, and all other work required for construction of the Project. 4.6.2 The ARCHITECT shall assist the OWNER in preparation of the necessary bidding documents and the documents which will comprise the contract to be entered into between the OWNER and the Contractor for construction of the Project using OWNER approved standardized forms where practicable(the Construction Documents). 4.6.3 The ARCHITECT shall assist the OWNER in filing the required documents for the approval of governmental authorities having regulatory jurisdiction over the Project. 4.6.4 The ARCHITECT shall provide three (3) sets of the Construction Documents to the OWNER for final review at
Sample 1
PHASE III - CONSTRUCTION DOCUMENTS PHASE. The Construction Documents phase shall begin on the written approval of the City of all design development studies and other Phase II services and written authorization to Consultant to proceed, and shall terminate on the approval by City of the Construction Documents and all other Phase III services. The professional services under Phase III shall include, but not be limited to, the following: 1. The preparation by Consultant of any and all Construction Documents, which shall describe and delineate the Project and shall be in such detail as is necessary to permit complete construction of the Project. The Construction Documents shall include the following: a. Work drawings; b. Site, including results of all subsurface soil investigations, existing grades, new final grades, paving, curbs, utility structures, planting and lawns; c. Structural; d. Mechanical, including plumbing and fire protection systems; and e. Electrical instrumentation. 2. Complete specifications which shall describe the scope, materials and quality of workmanship; 3. General conditions and special conditions; 4. Proposal forms and bidding information. In each instance of required submittals, 2 copies of the Construction Documents shall be submitted to City by Consultant for written approval. Upon approval, Consultant shall provide City with one set of reproducible working drawings and 2 sets of specifications, as a part of the basic services under this Agreement. Additional sets of drawings and specifications shall be provided, at cost, if requested by City; Consultant shall file all these documents and required revisions as needed with local authorities to produce plans and specifications acceptable by OSHA standards, local building standards, codes and ordinances; 5. During the bidding period and process, Consultant shall provide the following: a. Assist City in obtaining and analyzing proposals from contractors and in awarding and preparing the construction contract;
Sample 1

Related to PHASE III - CONSTRUCTION DOCUMENTS PHASE

  • Construction Documents Phase Bidding or Negotiation Phase:

  • Construction Document Phase 1.4.1 Based on the approved Design Development Documents, Guaranteed Maximum Price, coordinated models and any further adjustments in the scope or quality of the Project or in the Amount Available for the Construction Contract authorized by the Owner, the Architect/Engineer shall prepare, for approval by the Owner and review by the Construction Manager, Construction Documents consisting of Drawings, Schedules and Specifications derived from the model(s) in accordance with Owner’s written requirements setting forth in detail the requirements for construction of the Project, including, without limitation, the BIM Execution Plan and “Facility Design Guidelines”. The Plans, Drawings and Specifications for the entire Project shall be so prepared that same will call for the construction of the building and related facilities, together with its built-in permanent fixtures and equipment which will cost not more than the Guaranteed Maximum Price accepted by Owner, or the Amount Available for the Construction Contract established by Owner if no Guaranteed Maximum Price proposal has been accepted by Owner. The Architect/Engineer will be responsible for managing the design to stay within such Guaranteed Maximum Price proposal or Amount Available for the Construction Contract. The Architect/Engineer shall review the Construction Documents as they are being prepared at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Construction Documents. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.4.2 As a part of Construction Documents Phase, Architect/Engineer shall accomplish model coordination, aggregation and “clash detection” to remove conflicts in design between systems, structures and components. Architect/Engineer shall demonstrate and provide written assurance to Owner that all conflicts/collisions between models have been resolved. 1.4.3 The Architect/Engineer shall consult with the Owner and Construction Manager on matters such as construction phasing and scheduling, bid or proposal alternates, liquidated damages, the construction contract time period, and other construction issues appropriate for the Project. The Architect/Engineer shall assist the Owner and Construction Manager in the preparation of the necessary bidding information, bidding forms, RFP information, and RFP forms, and the Conditions of the Contract. 1.4.4 The Architect/Engineer shall assist the Owner in connection with the Owner’s responsibility and procedures for obtaining approval of all building and accessibility authorities having jurisdiction over the Project. 1.4.5 The Architect/Engineer shall provide coordination and inclusion of sequence of operations for all operable systems in the facility as defined by Owner during Design Development. 1.4.6 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.4.7 The Architect/Engineer shall participate in a final review of the Construction Documents and model(s) with the Owner and Construction Manager at the Project location or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Construction Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments. 1.4.8 Before proceeding into the Bidding and Proposal Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Construction Documents and approval of the Final Amount Available for the Construction Contract as approved by the Board of Regents.

  • Construction Documents The architectural and engineering documents setting forth the design for the Project prepared by the Design Professional. Construction Documents include, but are not limited to, the Specifications, the Drawings, the Supplementary Conditions, the General Conditions, and all Addenda.

  • PRE-CONSTRUCTION PHASE FEE The Pre-Construction Phase Fee is the total compensation payable to Contractor for the performance of Pre-Construction Phase Services, except for Additional Pre-Construction Phase Services approved in advance and in writing by Owner. The Pre-Construction Phase Fee shall be a lump sum amount based on the AACC established in this Agreement. 6.1 Except as specifically allowed by Owner, Contractor shall not be entitled to any increase in the Pre-Construction Phase Fee for any costs, expenses, liabilities or other obligations arising from the performance of Pre-Construction Phase Services. 6.2 Costs associated with the following items are specifically, but not exclusively, included in the establishment of the Pre-Construction Phase Fee: profit and profit sharing; general overhead; salaries and labor; housing and relocation; estimating, scheduling and information management systems and software; contract administration; office expenses; printing and copying; consulting fees; legal or accounting fees; cost of money; taxes; insurance premiums and deductibles; bond costs; purchase or rental of equipment; utilities; travel; per diem; fines or penalties; and damage awards. 6.3 If the scope of the Pre-Construction Phase Services is changed materially, the Pre- Construction Phase Fee shall be equitably adjusted. If the AACC is changed materially before acceptance of the GMP Proposal, the Pre-Construction Phase Fee shall be adjusted in writing in proportion to the change in the AACC. There shall be no adjustments in the Pre-Construction Phase Fee following acceptance of the GMP Proposal. 6.4 For Additional Pre-Construction Phase Services that are approved in advance and in writing by Owner, Contractor shall be entitled to additional compensation computed as follows: 6.4.1 A pre-established lump sum amount; or 6.4.2 The hourly cost of Contractor’s employees or consultants who actually perform the Additional Services based on the employee’s Worker Wage Rate or prorated Monthly Rate plus the actual cost of allowable expenses incurred in the performance of the Additional Pre-Construction Phase Services, plus an overhead and profit markup of ten percent (10%) of the total cost; or 6.4.3 As otherwise agreed in advance and in writing.

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure: 1. Coordination and providing supervision to all Subcontractor and workers; 2. Posting of the prevailing wage scale; 3. Maintaining a copy of the Contractors safety program manual made available to all construction personnel; 4. Conducting weekly on-site safety meetings; 5. Completing the daily labor and construction progress log on a daily basis and submit copies to the County on a daily basis. Copies of the previous day’s reports must be submitted by 9:00AM of the following day. a. Daily labor log is to include a listing of Subcontractor(s) and a count of workers by trade providing services for the day. b. Construction progress log is to include a narrative of the Work provided by trade(s). Narrative agrees to include the various areas of the jobsite where Work was performed and any problems or conditions that were encountered. c. In the event the Contractor fails to provide a daily log and/or construction progress log, the County may impose damages against the Contractor in the amount of fifty dollars ($50.00) for each log and deduct from the Contractor’s payment request, for each day the Contractor does not provide the documentation. 6. County may suspend Contractor operations if no Contractor Superintendent is observed. All delays caused by the suspension will be the responsibility of the Contractor. No time extension or claims for cost(s) associated with the suspension will be granted by the County.

  • Complete Agreement; Construction This Agreement, including the Schedules hereto, shall constitute the entire agreement between the Parties with respect to the subject matter hereof and shall supersede all previous negotiations, commitments and writings with respect to such subject matter. In the event of any inconsistency between this Agreement and any Schedule, the Schedule shall prevail. The rights and remedies of the Parties herein provided shall be cumulative and in addition to any other or further remedies provided by law or equity.

  • Pre-Construction Phase Employer’s Liability, Workers’ Compensation, Comprehensive General Liability and Comprehensive Automobile Liability in the amounts as set forth in the UGSC.

  • Contract Construction 6.27.1 The parties acknowledge that each party and its counsel have reviewed this CONTRACT and that the normal rule of construction to the effect that any ambiguities are to be resolved against the drafting party shall not be employed in the interpretation of this CONTRACT or any amendment or exhibits hereto.

  • PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:

  • DAF Construction The DAF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Developer and Connecting Transmission Owner agree on another mutually acceptable deadline, the Developer shall deliver to the Connecting Transmission Owner and NYISO “as- built” drawings, information and documents for the DAF, such as: a one-line diagram, a site plan showing the Large Generating Facility and the DAF, plan and elevation drawings showing the layout of the DAF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Developer’s step-up transformers, the facilities connecting the Large Generating Facility to the step-up transformers and the DAF, and the impedances (determined by factory tests) for the associated step-up transformers and the Large Generating Facility. The Developer shall provide to, and coordinate with, Connecting Transmission Owner and NYISO with respect to proposed specifications for the excitation system, automatic voltage regulator, Large Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!