Types of Projects and Design Services Disciplines Sample Clauses

Types of Projects and Design Services Disciplines. The services of the Architectural Designer shall be predominately architectural in nature. The scope of design is anticipated to include improvements for code compliance, accessibility, life safety improvements, educational program needs, facility operations and security improvements, and other immediate need improvements at facilities owned by the School District. These improvements will normally address elements of the facilities that have been identified as an immediate or critical need by the School District. In addition to architectural design services, the type of design services may include, but not necessarily be limited to, the other related disciplines of design services as follows: (1) Design Standards Updates; (2) Architectural Designering; (3) Civil Engineering; (4) HVAC Engineering; (5) Plumbing Engineering; (6) Electrical Engineering; (7) Technology Infrastructure Design; (8) Security Design; (9) Cost Estimating;
Sample 1Sample 2
AutoNDA by SimpleDocs
Types of Projects and Design Services Disciplines. The services of the Structural Designer shall be predominately Structural Engineering and Design in nature. The scope of design is anticipated to include analysis of existing structural conditions and remedial designs of structural systems of facilities owned by the School District. These improvements will normally address elements of the facilities that have been identified as an immediate or critical need by the School District. A susbstantial part of these services are expected to focus on masonry conditions, deteriorated reinforced concrete and corroded steel elements. Rehabilitation of deteriorated wood framing is also part of Structural Design Services. In addition to Structural Design Services, the type of design services may include, but not necessarily be limited to, the other related disciplines of design services such as the following: (a) Architectural; (b) Civil Engineering; (c) HVAC Engineering; (d) Plumbing Engineering; (e) Electrical Engineering; (f) Technology Infrastructure Design; (g) Security Design; (h) Cost Estimating; (i) Landscape Architecture; and (j) Planner. The Structural Designer shall need to have staff available to facilitate rapid services associated with assigned projects. Although it is anticipated that most assigned projects will be small to medium in construction scope (construction cost under $1,000,000), there is a potential that some will exceed this amount. There is also a potential that the Structural Designer will be called on to provide design services on a number of these assigned projects at the same time. It is expected that design and documentation of each of these assigned projects shall be completed according to the design schedule requested by the Office of Capital Programs. It is also expected that the Structural Designer shall provide basic Construction Administration for the bulk of these assigned projects. Construction Administration Services shall include (as dictated by the needs of the individual assigned projects), but may not be limited to, submittal review and approvals by the City of Philadelphia governing authorities, construction site observation, response to Requests for Information, issuance of Proposal Requests, review of Proposals and providing recommendations for modifications. In general, for assigned projects constructed by Contractors, the Structural Designer will be expected to provide Construction Administration consistent with industry standards. Construction Administration on any as...
Sample 1
Types of Projects and Design Services Disciplines. The scope of design services provided by the MEP & FP Engineer shall include, but may not be limited to, the following:
Sample 1
Types of Projects and Design Services Disciplines. Services under this Contract shall be predominately engineering in nature. The scope of design is anticipated to include improvements for Mechanical, Plumbing, Fire Protection and Electrical Services at facilities owned by the School District, in addition to new construction and/or major additions. Work under this Contract will normally address elements of the facilities that have been identified as an immediate or critical need by the School District. The scope of design services provided by the MEP & FP Engineer for assigned Projects shall include, but may not be limited to, the following:
Sample 1
Types of Projects and Design Services Disciplines. Services of the Structural Engineer shall be predominantly structural engineering and design in nature. The scope of design is anticipated to include analysis of existing structural conditions and remedial designs of structural systems of facilities owned by the School District. These improvements will normally address elements of the facilities that have been identified as an immediate or critical need by the School District. Substantial portions of the design services are expected to focus on masonry conditions, deteriorated reinforced concrete, and corroded structural steel elements. Rehabilitation of deteriorated wood framing is also included as part of the design services scope. The scope of design services provided by the Structural Engineer shall include, but not be limited to, the following:
Sample 1
Types of Projects and Design Services Disciplines. The scope of design services provided by the Roofing Designer shall include, but may not be limited to, the following:
Sample 1

Related to Types of Projects and Design Services Disciplines

  • For Product Development Projects and Project Demonstrations  Published documents, including date, title, and periodical name.  Estimated or actual energy and cost savings, and estimated statewide energy savings once market potential has been realized. Identify all assumptions used in the estimates.  Greenhouse gas and criteria emissions reductions.  Other non-energy benefits such as reliability, public safety, lower operational cost, environmental improvement, indoor environmental quality, and societal benefits.  Data on potential job creation, market potential, economic development, and increased state revenue as a result of the project.  A discussion of project product downloads from websites, and publications in technical journals.  A comparison of project expectations and performance. Discuss whether the goals and objectives of the Agreement have been met and what improvements are needed, if any.

  • Design Services The Engineer shall perform services during the schematic design phase, the design development phase, the contract documents phase, and the bidding period as hereinafter specified.

  • DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK Firms and/or individuals that assisted in the development or drafting of the specifications, requirements, statements of work, or solicitation documents contained herein are excluded from competing for this solicitation. This shall not be applicable to firms and/or individuals providing responses to a publicly posted Request for Information (RFI) associated with a solicitation.

  • AIN Selective Carrier Routing for Operator Services, Directory Assistance and Repair Centers 4.3.1 BellSouth will provide AIN Selective Carrier Routing at the request of <<customer_name>>. AIN Selective Carrier Routing will provide <<customer_name>> with the capability of routing operator calls, 0+ and 0- and 0+ NPA (LNPA) 555-1212 directory assistance, 1+411 directory assistance and 611 repair center calls to pre-selected destinations.

  • Detailed Description of Services / Statement of Work Describe fully the services that Contractor will provide, or add and attach Exhibit B to this Agreement.

  • Schematic Design Phase Services § 3.2.1 The Architect shall review the program and other information furnished by the Owner, and shall review laws, codes, and regulations applicable to the Architect’s services.

  • Maintenance and Support Services As long as you are not using the Help Desk as a substitute for our training services on the Tyler Software, and you timely pay your maintenance and support fees, we will, consistent with our then-current Support Call Process:

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Design Development Phase Services 3.3.1 Based on the Owner’s approval of the Schematic Design Documents, and on the Owner’s authorization of any adjustments in the Project requirements and the budget for the Cost of the Work, the Architect shall prepare Design Development Documents for the Owner’s approval. The Design Development Documents shall illustrate and describe the development of the approved Schematic Design Documents and shall consist of drawings and other documents including plans, sections, elevations, typical construction details, and diagrammatic layouts of building systems to fix and describe the size and character of the Project as to architectural, structural, mechanical and electrical systems, and other appropriate elements. The Design Development Documents shall also include outline specifications that identify major materials and systems and establish, in general, their quality levels.

  • SCOPE OF ARCHITECT’S BASIC SERVICES 3.1 The Architect’s Basic Services consist of those described in this Article 3 and include usual and customary structural, mechanical, and electrical engineering services. Services not set forth in this Article 3 are Supplemental or Additional Services.

Time is Money Join Law Insider Premium to draft better contracts faster.