Contractor References. After the bid opening, and prior to awarding the contract, the Department has the right to request references (name, addresses and telephone numbers) of similar work performed in the previous two (2) ears as proof of qualifications to perform the work involved in this contract.

Contractor References.  List five (5) or more commercial grid-connected PV projects installed in the United States over the last five years. Include for each project: o Exact role(s) your organization performed for the project (e.g. material supplier, lead o contractor, electrical subcontractor, design, consulting, etc.). o Location. o Application description. o Product name/type. o Customer name and contact information. o Date installed. o Project cost. o PV module used. o KWp rating. o Cumulative kWh produced since system installation. o Current operational status of system.  Provide actual system data for five (5) of the grid-connected projects that demonstrates 90% or better availability of the PV projects used as customer references.  Proposals shall demonstrate a proven, robust data acquisition system that includes tracking of site-specific actual kWh production and actual meteorological data including tracking of solar irradiance, ambient temperature, and module temperature, with data available remotely.  Proposals shall provide evidence that the proposed technology and equipment would meet or exceed all currently applicable and proposed safety and interconnection standards. All equipment components must be UL certified, and meet existing facility structural and fire safety requirements.  Proposals shall provide evidence that the proposed technology and equipment would meet or exceed all currently applicable and proposed environmental standards.

Contractor References. Bidders shall provide three (3) references from previous planting contracts with the Commonwealth of PA from within the past 5 years. These references should include the name of the contracting agency, the year of the contract, the contract number, and the name of the state employee responsible for overseeing the project, and a telephone number if possible.

Contractor References. (In performing this contract, the Contractor is referred to, but not limited to, the following documents):  MIL-STDS, MIL-SPECS, and Instructions at xxxx://xxx.xxx.xxx.xxx/app_uil/SpecsAndStandards.aspx  Navy Modernization Program (NMP) Manual SL720-AA-MAN-030 at xxxxx://xxx.xxx.xxxx.xxx/  NAVSEA Technical Specification 9090-310 (revision) at xxxxx://xxx.xxx.xxxx.xxx/  NAVSEA Standard Items at xxxx://xxx.xxxxxx.xxxx.xxx/CNRMC/SERMC/SSRAC1/standard.aspx  NAVSEA C9210.4 (revision) - All non-nuclear work on nuclear powered ships must be in strict compliance with the Naval Sea Systems Command Instruction (classified instructions under separate cover)  Applicable SC Documents (SCDs)/Ship Alteration Records (SARs) provided by NSWCPD SME  Applicable Ship's Installation Drawings (SIDs) and Sketches provided by NSWCPD SME  NAVSEA S9AAO-AB-GSO-010/GOS, General Specification for Overhaul of Surface Navy Ships  NAVSEA S9AAO-AA-SPN-010/GEN SPEC, General Specifications for Ships  CINCLANTFLT/CINCPACFLTINST 4790.3, Joint Fleet Maintenance Manual (JFFM)  MIL-STD-1310, (Navy) Bonding and Grounding  NAVSEA S9300-AW-EDG-010, Electrical Plant Installation Standard Methods (EPISM)  NAVSEA Technical Publication S9074-AQ-GIB-010/248, Requirements for Welding and Brazing Procedure and Performance Qualification  NAVSEA Technical Publication S9074-AR-GIB-010/278, Requirements for Fabrication Welding and Inspection, and Casting Inspection and Repair for Machinery, Piping, and Pressure Vessels  MIL-STD-1689A, Fabrication, Welding and Inspection of Ship Structures  NAVSEA Technical Publication 59074-AR-GIB-010/1688, Requirements for Fabrication Welding and inspection of Submarine Structure.  ISO-9001 Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation and Servicing xxxx://xxx.xxx.xxx  ISO-9002 Quality Systems - Model for Quality Assurance in Production, Installation and Servicing xxxx://xxx.xxx.xxx

Contractor References. If you have not held a contract with the Owners for the last 3 years for similar projects you must provide (3)three references for contracts similar in nature to the work required in this project. Each reference must include the following: Owner: Street Address: City: State: Zip: Name Owners Representative: Phone: Contract Amount: INFORMATION SHALL BE ATTACHED TO THE RESPONSE ATTACHMENT SECTION OF YOUR EBID. (YES) Quick Quotes We agree to provide the requesting agency or the City/County Purchasing department with "Quick Quotes" for all projects as requested. Quick Qoutes are due back to the requesting agency or department within 24 hours of request. Quick Quotes will be required for quantities that exceed the amounts listed in the Line Item section of the Ebid. Yes (Yes) 1 Two Color Print What would the price be for a two (2) color print for all the envelopes? Prices are quoted in Line Items Fees For File Changes If an agency provides a disk with print files, will there be any set-up or change-order fees? If yes, what are they and specify why you are charging this fee. No

Related to Contractor References

Contract References Citation of the provision or provisions of the Contract Documents which specify the Work to be executed.
Customer Reference Customer agrees that Dynatrace may reference Customer as a Dynatrace customer, subject to Customer’s trademark and logo usage guidelines provided by Customer, and that occasionally, after Customer review, Dynatrace may issue a press release and case study.
Contractor Personnel – Reference Checks The Contractor warrants that all persons employed to provide service under this Contract have satisfactory past work records indicating their ability to adequately perform the work under this Contract. Contractor’s employees assigned to this project must meet character standards as demonstrated by background investigation and reference checks, coordinated by the agency/department issuing this Contract.
Product References a. “Or Equal” In all Solicitations or Bid Specifications, the words “or equal” are understood to apply where a copyrighted, brand name, trade name, catalog reference, or patented Product is referenced. References to such specific Product are intended as descriptive, not restrictive, unless otherwise stated. Comparable Product will be considered if proof of compatibility is provided, including appropriate catalog excerpts, descriptive literature, specifications and test data, etc. The Commissioner’s decision as to acceptance of the Product as equal shall be final.
Technical References Technical References that describe the practices, procedures and specifications for certain services (and the applicable interfaces relating thereto) are listed on Schedule 2.3 (the “Technical Reference Schedule”) to assist the Parties in meeting their respective responsibilities hereunder.
Cross-References References in this Amendment to any Part or Subpart are, unless otherwise specified, to such Part or Subpart of this Amendment.
Tariff References 3.5.1 References to state tariffs throughout this Agreement shall be to the currently effective tariff for the state or jurisdiction in which the services were provisioned; provided however, where certain AT&T-22STATE services or tariff provisions have been or become deregulated or detariffed, any reference in this Agreement to a detariffed or deregulated service or provision of such tariff shall be deemed to refer to the service description, price list or other agreement pursuant to which AT&T-22STATE provides such services as a result of detariffing or deregulation.
Contractor Personnel Contractor's staff is expected to present a professional appearance. All personnel of the Contractor will be neat, well groomed, properly uniformed in industry standard uniforms and are expected to conduct themselves at all times in a responsible and courteous manner while performing any work under this Agreement and/or whenever they are on District property. The following code of conduct will be adhered to by the Contractor, his agent(s) and/or his employees. If Contractor fails to ensure that its employees or other agents comply with these requirements, then Contractor may be terminated for cause under this Agreement:
Website References The following clauses apply to the Master Contract (“IND DEL”) and all others in the below matrix may apply at the Task Order level, as applicable, depending upon the contract type of the Task Order, or as specifically referenced in the applicable Task Order: CLAUSE # CLAUSE TITLE DATE FP COST TM MC 52.211-8* TIME OF DELIVERY JUN 1997 X X X X 52.211-8* ALTERNATE I APR 1984 X X X X 52.211-8* ALTERNATE II APR 1984 X X X X 52.211-8* ALTERNATE III APR 1984 X X X X 52.211-9* DESIRED AND REQUIRED TIME OF DELIVERY JUN 1997 X X X X 52.211-9* ALTERNATE I APR 1984 X X X X 52.211-9* ALTERNATE II APR 1984 X X X X 52.211-9* ALTERNATE III APR 1984 X X X X 52.211-11* LIQUIDATED DAMAGES – SUPPLIES, SERVICES OR RESEARCH AND DEVELOPMENT SEP 2000 X 52.242-15 STOP-WORK ORDER AUG 1989 X X CLAUSE # CLAUSE TITLE DATE FP COST TM MC 52.242-15 ALTERNATE I APR 1984 X 52.242-17 GOVERNMENT DELAY OF WORK APR 1984 X 52.247-34 F.O.B. DESTINATION NOV 1991 X X 52.247-35 F.O.B. DESTINATION WITHIN CONSIGNEE’S PREMISES APR 1984 X X (Note: Provision numbers followed by an asterisk (*) require fill-ins by the OCO if determined applicable and incorporated into the Order.)
Working Environment The Parties agree that a safe and clean working environment is essential in order to carry out work assignments in a satisfactory manner. It will be the Employer's responsibility to ensure that all working areas and Employer-owned vehicles are maintained in a safe and clean condition.

Contractor References Sample Clauses

Filter & Search

Related Clauses

Parent Clauses

Sub-Clauses

Related to Contractor References