Scope of Work Description. The UNIVERSITY will perform Technical Services as described in the Order Form agreed upon the parties in writing and incorporated herein by reference (“Order Form”) between the Protein Facility personnel and CUSTOMER. If CUSTOMER is to furnish UNIVERSITY with materials to be tested or used while performing the Technical Services (“Materials”), such Materials shall be identified in the Order Form. CUSTOMER shall provide UNIVERSITY, at no charge, with a sufficient quantity of the Materials to perform the Technical Services. CUSTOMER represents and warrants that it is authorized to retain UNIVERSITY to perform the Technical Services using the Materials. CUSTOMER shall disclose in the Order Form whether the Material is a hazardous substance and of any known hazards and risks associated with the Materials and whether the Material is an item on the Munitions List or the Commerce Control List other than EAR99 items. UNIVERSITY shall use the Materials only as needed to provide the Technical Services and shall not modify, alter, reverse engineer or run analytic tests to determine the composition of the Materials without CUSTOMER’s prior written permission. UNIVERSITY shall not provide the Materials to a third party nor allow access to the Materials by a third party. UNIVERSITY may provide the Materials to its employees and students who have a bona fide need to use the Materials in performing the Technical Services provided that UNIVERSITY requires such employees or students to abide by the terms of this Agreement. Upon completion of the Technical Services or at CUSTOMER’S request, UNIVERSITY shall destroy or return to CUSTOMER the Materials not consumed during the performance of the Technical Services in accordance with CUSTOMER’s instructions. UNIVERSITY may retain a sample of the Materials if needed to evidence its fulfillment of its contractual obligations. Unless stated otherwise in the Order Form, CUSTOMER shall assume all risk of loss for the transportation of the Materials to and from UNIVERSITY and shall be responsible for all delivery costs. CUSTOMER retains ownership of the Materials at all times.
Scope of Work Description. Demolition and Removal Work ▪ Provide lifts and rigging required to safely access and remove cooling tower ▪ Isolate, drain and disconnect existing cooling tower piping ▪ Disconnect the cooling tower electrical and BAS wiring ▪ Remove and dispose of properly ▪ Isolate, drain and disconnect existing pumps piping ▪ Disconnect the pumps’ electrical and BAS wiring New Installation Work ▪ Provide temporary cooling/heating during downtime of old equipment and installation of new equipment ▪ Install new cooling tower on existing cooling tower location ▪ Connect the cooling tower to existing tie-in points, fill and drain lines ▪ Install valves, strainers, and gauges ▪ Reconnect and fill new cooling tower ▪ Provide and install basin heater and heat trace of exterior pipes ▪ Provide and install insulation and cladding that matches existing for the replaced piping at the xxxxxxx tower location ▪ Connect electrical and controls wiring ▪ Provide cooling tower, testing, and startup ▪ Install new pumps ▪ Connect piping, associated valves, strainer, and gauges ▪ Provide additional pipe supports as required ▪ Provide test and balance of the open hydronic loop system serving the cooling tower and the heat exchanger ▪ Provide warranty registration with manufacturer Schedule 1 FIM 8 Equipment List Building Existing Equipment Proposed Equipment Tag Make Model Year Cooling Capacity (Ton) Qty Tag Make Model Cooling Capacity (Ton) Qty Library CT-01 BAC VTO-088-L 2010 88 1 CT-01 BAC VTO-088-L 88 1 Library P-1 B&G TBD N/A 200 1 P-1 Xxxxxxxxx Sensorless 4300 210 gpm 1 Library P-2 B&G TBD N/A 200 1 P-2 Xxxxxxxxx Sensorless 4300 210 gpm 1 Exclusions ▪ Supplying safety or security escorts. ▪ Environmental permits, JCI will assist the City of Stillwater in applying for permits if so required. ▪ All work will be performed during normal work hours unless stated otherwise, there is no premium time included unless otherwise noted in the FIM scope of work. ▪ Temporary cooling, heating, power, or plumbing required to perform the work will utilize the City of Stillwater’s utilities unless noted otherwise in the FIM scope of work. ▪ The City of Stillwater is responsible for timely scheduled shutdowns as required for JCI to complete the scope of work. ▪ Test and balance of existing air and water HVAC systems unless otherwise noted in a specification FIM scope of work. ▪ Any building system design issues not related to the FIM scope of work is the responsibility of the City of Stillwater unless n...
Scope of Work Description. The UNIVERSITY will perform Technical Services as described in the Exhibit A, which is hereby incorporated as a part of this AGREEMENT, except for any terms which are inconsistent with the terms set forth herein. The researcher responsible for the work within the University will be ……………………………… (herein referred as “RESEARCHER”)
Scope of Work Description. Total Charges Island High School – LED Sports Lighting $539,213.00 ☒ Description of Equipment and Services (Exhibit A) ☒ Compensation Payment Schedule (Exhibit C) ☐ Customer Financing (Exhibit F) ☐ Maintenance Services (Exhibit M) ** The compensation quoted above will be honored through the date of June 1, 2020. Each party agrees to all terms and conditions in this Agreement. The parties may exchange counterparts of this Agreement as a scanned image (e.g., .pdf or .tiff file extension) attachment to email; a scanned signature is an original signature for all purposes. Agreed by Savannah Chatham County Public Schools Accepted by Georgia Power Company By: By: Name: Name: Title: Title: Date: Date:
Scope of Work Description. 1. The purpose of this ITB is to establish a Price Agreement with a vendor to produce specified crops in fields located within Valencia County, NM, at both the Belen WMA and the Casa Colorado WMA, for the benefit of wildlife. The Awarded Vendor will annually produce 600,000 pounds of grain corn, in addition to the quantity of grain sorghum identified in their submitted response to Item 1 of this ITB (“Sorghum Bid”) for DGF.
Scope of Work Description. Demolition and Removal Work ▪ Safely disconnect existing AHU from existing ducting, condensate drain piping, chilled water piping. ▪ Safely shut down AHU-11. Carefully remove access panel sections to gain access to the emergency cooling A-Coil and refrigerant line set. Recover and dispose of the R-22 refrigerant. ▪ Disconnect electrical, controls wiring, drain and refrigeration piping. Remove and dispose of A- Coil. ▪ Disconnect electrical, controls and piping from the corresponding DX air-cooled condenser on the roof. Remove and dispose of this unit. ▪ Temporarily seal or cap disconnected utilities and exposed ducting. ▪ If necessary (on a per unit basis) remove electrical wiring back to the existing disconnect. ▪ Disconnect and secure the building automation system (BAS) from existing HVAC units in this scope of work. ▪ City of Stillwater will be responsible for disconnecting all active smoke detectors at each unit in coordination with the Contractor to facilitate timely project completion. ▪ Remove all three-way valves and bypass legs from chilled water piping. These will be replaced with new two-way valves as required for variable flow pumping. ▪ Safely isolate, drain, and disconnect piping and electrical and controls wiring to chilled water pumps.
Scope of Work Description. The SCHOOL will perform the following technical services (the “Technical Services”): INSERT SCOPE The SCHOOL will provide the following deliverables (the “Deliverables”): INSERT DELIVERABLES.
Scope of Work Description. The SOW : a. Inspection, testing, PM, CM and emergency call out support of all Fire alarm, detection, initiation and notification components, Fire Alarm Control Panel, Fire suppression and extinguishing system, Emergency lightings and Emergency Power Supply Systems (EPSS), Firefighting system equipment (Fire Pumps & Jockey Pumps, Skid equipment�s, Fire water Storage Tanks, Fire Hydrant as per OEM, local statutory (QCDD) and NFPA at Qatalum Smelter, Harbour, Power Plant area and Doha Office. b. Modification, Supply of specialized material spares and programming support. c. Refiling, Hydro Testing and certification of Portable Fire Extinguisher Cylinders (DCP and CO2) Tendering Requirement: 1. Interested Bidder must have a valid license or approval from Qatar Civil Defense Department (QCDD) to install, commission, test and maintain fire alarm detection, suppression systems, emergency lightings and firefighting equipment�s which includes Fire Pumps, Storage Tanks, Hydrants. 2. Bidders who wish to participate in this tender should submit the Form of Acknowledgement & Confidentiality Agreement (Attachment 1 of the ITT document) and confirm participation by sending email to the undersigned latest by 16 July 2023 to Xxxx.Xxxxxxx@xxxxxxx.xxx with copy to Xxxx.Xxxxxxxxxx@xxxxxxx.xxx. Bids will not be considered unless points 1 and 2 are applicable. Tender Instructions All published tenders are available for download within the Tender Issue period indicated against each Open Tender. No tenders will be available for download after the expiration of the Tender Issue period. Only bidders who are able to purchase the document will have the access to view and download the tender package after the Tender Issue period until the Bid Closing date. Qatalum reserves the right, in its own discretion, to set and revise Tender Issue periods. Bidders may refer to this web-page regularly for up to date information on Qatalum�s Tenders, Issue Period, Bid Closing Date and other pertinent information.
Scope of Work Description. The UNIVERSITY will perform Technical Services as described in the appropriate user agreement form submitted to or written correspondence between the X.X. Xxxx Metabolomics Research Laboratory (MRL).
Scope of Work Description. The information provided under this Exhibit is retrieved from the Subrecipient Agreement. In coordination and agreement with the Subrecipient, the County will utilize the information below to inform and update the County’s approved System of Record for key performance measures and project budget cost eligibility. Subrecipients will work with the County to ensure any edits and amendments to this Exhibit are subsequently reviewed and approved within the System of Record and/or under a formal amendment in accordance with the Agreement.
