College Mission and Purpose Sample Clauses

College Mission and Purpose. FCoT is a growing Ofsted Outstanding rated Further and Higher Education Technical College with two campuses in Farnborough and Aldershot. At Farnborough, the offer includes University Centre Farnborough (UCF), whose degrees are awarded by the University of Surrey, most being our two-year accelerated degrees, firmly positioned as a part of our responsive HTQs. FCoT also has a strong aviation history going back to RAF classes on Farnborough Airfield in 1913, progressing to become an RAE Technical School by 1944 which merged in 1960 with the Farnborough Technical College three years after the latter opened. Farnborough is the home of aviation. We are therefore proud of our Aerospace Research and Innovation Centre (XXXX), opened by then-PM Xxxxx Xxxxxxx. XXXX is a £5m investment in response to employers’ demand for an up- to-date training and research facility. It has resulted in resurgent demand and overall growth in 2022-23 of 349 learners (Apprenticeships, HTQs such as HNC/D and full-time FE). Engagement with new and existing partners suggests participation will further increase in 2023-24. Being a Technical Institution serving Xxxx, Rushmoor, Surrey Heath and the wider EM3 area, the College’s mission is, ‘To be a Technical Community University, facilitating learners’ social mobility, fuelling sustainable industries, and empowering inclusive lifelong learning communities’. Consequently, the College offers a diverse and inclusive provision in all subject areas except for agriculture, horticulture, and animal care. In light of our very successful Transformation Strategy 2017-22, formulated in response to an Area Based Review (2016), FCoT has been repositioned as a viable regional provider, having grown by over £7m since 2016. Thereby exceeding a stretch overall annual income target of £20m, to be a viable, reliable, local and regional asset with outstanding financial health and an Outstanding Ofsted revalidation (May 2022). Our new Sustainable Transformations Strategy (STS) 2022-2032, approved by the Governing Board in July 2022, aims to build on the success of the 2017-2022 Transformation Strategy. Figure 1 below, summarises our purpose, our offering, our ambitions to serve a diverse range of customers and enabling goals that are our pillars of success. We are very pleased our in-year performance for 2022-23 demonstrates a continued growth of c£22.5m. Our value, therefore, goes beyond being a highly regarded training provider, supporting our businesses and i...
AutoNDA by SimpleDocs
College Mission and Purpose. Our Mission: Our Vision:
College Mission and Purpose. 1.1 Our Objectives (Cont’d):
College Mission and Purpose. At the heart of this Accountability Agreement (AA) is the College’s Sustainability Transformations Strategy (STS) 2022-32. The STS which was approved by the Corporation’s Board in July 2022, after extensive stakeholder consultation, building upon our successful 2017-22 Transformation Strategy. Aligned with our vision and mission, are four Enabling Goals that serve as our pillars of success

Related to College Mission and Purpose

  • Formation and Purpose Promptly following the Effective Date, the Parties shall confer and then create the JSC and the IPC, and, optionally, create one or more of the other Committees listed in the chart below. Each Committee shall have the purpose indicated in the chart. To the extent that after conferring both Parties agree to not create a Committee (other than the JSC and the IPC), the creation of such Committee shall be deferred until one Party informs the other Party of its then desire to create the so-deferred Committee, at which point the Parties will thereafter promptly create the so-deferred Committee. Joint Steering Committee (“JSC”) Establish projects for the Bacteriophage Program and establish the priorities, as well as approve budgets for such projects. Approve all subcommittee projects and plans (except for decisions of the IPC). The JSC shall establish budgets not less than on a quarterly basis. Chemistry, Manufacturing and Controls Committee (“CMCC”) Establish project plans and review and approve activities and budgets for chemistry, manufacturing, and controls under the Bacteriophage Program. Regulatory Committee (“RC”) Review and approve all research and development plans and projects, including clinical projects, associated with any necessary regulatory approvals, all associated publications, and all regulatory filings and correspondence relating to gaining regulatory approval for new Ampliphi Products under the Bacteriophage Program; and review and approve itemized budgets with respect to the foregoing. Commercialization Committee (“CC”) Establish project plans and review and approve activities and budgets for Commercialization activities under the Bacteriophage Program. Portions herein identified by [*****] have been omitted pursuant to a request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended. A complete copy of this document has been filed separately with the Securities and Exchange Commission. Intellectual Property Committee (“IPC”) Evaluate all intellectual property issues in connection with the Bacteriophage Program; review and approve itemized budgets with respect to the foregoing.

  • Introduction and Purpose Introduction • Neighbourhood Development Plans • Neighbourhood Development Orders

  • Scope and Purpose 1.01 This document is intended to set out general guidelines and principles regarding child welfare sector integrations during the term of this agreement which are mandated by the Ministry and for which local Human Resources Adjustment Plans (HRAP) are required to be negotiated. Subject to the following terms, these principles will serve as the framework for the treatment of bargaining unit employees and will apply to subsequent negotiations with unions, as may be required, as part of an integration arising within the context of the Ontario Labour Relations Act (OLRA) or PSLRTA, whichever is applicable. 1.02 Employees who may be impacted by an integration are valued and are to be treated fairly and respectfully. The parties agree that they will make reasonable efforts to reduce any negative affect on employees as a result of an integration in accordance with the following.

  • Parties and Purpose This agreement (the “Agreement”) is entered by and between certain portfolios and classes thereof, specified below and in Schedule C, of Franklin Xxxxxxxxx Variable Insurance Products Trust, an open-end management investment company organized as a statutory trust under Delaware law (the “Trust”), Franklin/Xxxxxxxxx Distributors, Inc., a California corporation which is the principal underwriter for the Trust (the “Underwriter,” and together with the Trust, “we” or “us”), the insurance company identified on Schedule A (together “you”) and your distributor, on your own behalf and on behalf of each segregated asset account maintained by you that is listed on Schedule B, as that schedule may be amended from time to time (“Account” or “Accounts”). The purpose of this Agreement is to entitle you, on behalf of the Accounts, to purchase the shares, and classes of shares, of portfolios of the Trust (“Portfolios”) that are identified on Schedule C, consistent with the terms of the prospectuses of the Portfolios, solely for the purpose of funding benefits of your variable life insurance policies or variable annuity contracts (“Contracts”) that are identified on Schedule D. This Agreement does not authorize any other purchases or redemptions of shares of the Trust.

  • Background and Purpose Executive was employed by the Company. Executive's employment is ending effective __________ under the conditions described in Section 3.1 of the Executive Change of Control Agreement ("Agreement") by and between Executive and the Company dated _____________, 2012. The purpose of this Release is to settle, and the parties hereby settle, fully and finally, any and all claims the Releasing Parties may have against the Released Parties, whether asserted or not, known or unknown, including, but not limited to, claims arising out of or related to Executive's employment, any claim for reemployment, or any other claims whether asserted or not, known or unknown, past or future, that relate to Executive's employment, reemployment, or application for reemployment.

  • INTENT AND PURPOSE The Employer and the Union each represent that the purpose and the intent of this Agreement is to promote cooperation and harmony, to recognize mutual interests, to provide a channel through which information and problems may be transmitted from one to the other, to formulate rules to govern the relationship between the Union and the Employer, to promote efficiency and service, and to set forth herein the basic agreements covering rates of pay, hours of work, and conditions of employment.

  • Application and Operation of Agreement Table Of Contents

  • Authority and Purpose Pursuant to 18 V.S.A. § 9410, the GMCB maintains certain health care claims and eligibility data within VHCURES to enable it to carry out its statutory duties, including A. determining the capacity and distribution of existing resources; identifying health care needs and informing health care policy; B. evaluating the effectiveness of intervention programs on improving patient outcomes; C. comparing costs between various treatment settings and approaches; D. providing information to consumers and purchasers of health care; and E. improving the quality and affordability of patient health care and health care coverage. To the extent allowed by HIPAA, the GMCB seeks to make some of this data available as a resource for individuals and entities to continuously review health care utilization, expenditures, and performance in Vermont. The purpose of this Agreement is to specify the conditions under which the GMCB will release VHCURES data, and to ensure that the data is accessed, maintained, used, and disclosed in compliance with all applicable statutory, regulatory, and contractual requirements.

  • Operation and Use So long as the Aircraft, Airframe or any Engine is subject to the Lien of this Trust Indenture, the Owner shall not operate, use or locate the Aircraft, Airframe or any Engine, or allow the Aircraft, Airframe or any Engine to be operated, used or located, (i) in any area excluded from coverage by any insurance required by the terms of Section 4.06, except in the case of a requisition by the U.S. Government where the Owner obtains indemnity in lieu of such insurance from the U.S. Government, or insurance from the U.S. Government, against substantially the same risks and for at least the amounts of the insurance required by Section 4.06 covering such area, or (ii) in any recognized area of hostilities unless covered in accordance with Section 4.06 by war risk insurance, or in either case unless the Aircraft, the Airframe or any Engine is only temporarily operated, used or located in such area as a result of an emergency, equipment malfunction, navigational error, hijacking, weather condition or other similar unforeseen circumstance, so long as Owner diligently and in good faith proceeds to remove the Aircraft from such area. So long as the Aircraft, the Airframe or any Engine is subject to the Lien of this Trust Indenture, the Owner shall not permit such Aircraft, Airframe or any Engine, as the case may be, to be used, operated, maintained, serviced, repaired or overhauled (x) in violation of any Law binding on or applicable to such Aircraft, Airframe or Engine or (y) in violation of any airworthiness certificate, license or registration of any Government Entity relating to the Aircraft, the Airframe or any Engine, except (i) immaterial or non-recurring violations with respect to which corrective measures are taken promptly by Owner or Permitted Lessee, as the case may be, upon discovery thereof, or (ii) to the extent the validity or application of any such Law or requirement relating to any such certificate, license or registration is being contested in good faith by Owner or Permitted Lessee in any reasonable manner which does not involve any material risk of the sale, forfeiture or loss of the Aircraft, Airframe or any Engine, any material risk of criminal liability or material civil penalty against Mortgagee or impair the Mortgagee's security interest in the Aircraft, Airframe or any Engine.

  • Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID: 2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises; 2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID; 2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or 2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis. 2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored. 2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors. 2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures. 2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!