Installation of the Equipment. You must provide an adequate and suitable space, power supply and environment for all equipment used in connection with the service and located on the premises.
Installation of the Equipment. Tenant shall, at its sole cost and expense, and at its sole risk, install the Equipment in a good and workmanlike manner, and in compliance with all of the following (the “Codes”): building, electric, communications, and safety codes, ordinances, standards, regulations, and requirements of the Federal Government, including, without limitation, the Federal Communications Commission (the “FCC”) or any successor agency having jurisdiction over radio or telecommunications, the Federal Aviation Association, the State of Florida, Broward County, and all other governmental authorities having jurisdiction. Prior to installation, Tenant shall deliver to Landlord copies of Tenant’s plans and specifications for the installation for the Equipment and proof that all plans and specifications are in accordance with the Codes. Tenant shall cause the plans and specifications for the Equipment to conform to Landlord’s design and engineering criteria provided to Tenant from time to time in effect and shall make any reasonable changes required by Landlord or its agents, engineers, or architects. In no event shall Tenant’s installation of the Equipment damage the Building Project or existing structures on the Building Project. or interfere with the maintenance of the Building Project, any system contained in the Building Project, any system currently serving the Building Project, or any radio or telecommunication equipment operated from the Building Project. Without limiting the generality of the foregoing, Tenant shall not install the Equipment in any manner which would void or limit any warranty or guaranty covering the roof of the Building Project. Tenant shall notify Landlord upon completion of the installation of the Equipment Landlord’s review and approval of the plans and specifications for the installation of the Equipment and Landlord’s supervision and inspection of such installation shall not be construed in any way as approval by Landlord of the adequacy or safety of the installation of the Equipment or as a waiver of any of Landlord’s rights under this License, and Tenant shall be solely responsible for the adequacy and safety of the installation and operation of the Equipment and solely liable for any damages or injury arising out of such installation and operation, other than injury or damages arising out of the negligence or willful misconduct of Landlord. Tenant shall pay to Landlord, upon demand, the cost of repairing any damage to the Building Project caused ...
Installation of the Equipment. 7.1 The Hirer shall install the Equipment at the Delivery Address (except in the event of Dry Hire of the Equipment (pursuant to clause 8)). The cost of installation shall not be included in the Rental Payment and shall be chargeable separately by the Hirer at the cost notified by the Hirer to the Customer from time to time.
7.2 Any date and/or time provided by the Hirer for the installation of the Equipment (the ‘Installation Date’) shall be an estimate only and time shall not be of the essence. The Hirer shall not be liable whatsoever to the Customer or any third party for any failure to delay installing the Equipment on the estimated Installation Date. For the avoidance of any doubt, the Hirer does not warrant and cannot guarantee that the Installation Date shall be on the same date as the Delivery Date and/or the Pick-Up date and is subject to the Hirer’s availability.
7.3 Upon installation by the Hirer, the Hirer may provide the Customer with a handover including, without limitation, in respect of the use, handling and daily maintenance of the Equipment. The Customer warrants that it will comply with all handover instructions during the Hire Period.
7.4 The Customer shall procure that a duly authorised representative of the Customer shall be present at the installation of the Equipment. If the Customer notices any defects following installation of the Equipment, it must notify the Hirer immediately. Acceptance of any defects shall be at the sole and absolute determination of the Hirer.
7.5 Notwithstanding any defects noted and agreed in clause 7.4, the Customer’s acceptance by such representative of installation shall constitute conclusive evidence that the Customer has examined the Equipment and has found it to be in good condition, complete and fit in every way for the purpose for which it is intended. If required by the Hirer, the Customer's duly authorised representative shall sign a receipt confirming such acceptance.
Installation of the Equipment. (a) CCE will agree with the Hirer where within an Outlet that the Equipment will be installed. CCE may use an agent to deliver and install the Equipment.
(b) The Hirer must ensure that there is adequate access to and sufficient clear space in the intended location for the Equipment, that it is suitable for the Equipment in accordance with CCE’s require- ments, and that a properly earthed electricity socket with a current rating suitable for the Equipment and complying with all relevant legislation (including a means of mains isolation) is available within 2 metres of the intended location of the Equipment (although not located directly behind where the Equipment will be situated) and which can be easily reached. Where the Equipment is Dispensed Equipment the Hirer is additionally responsible for the provision of a water stopcock plus connection fittings within 2.5 metres of the Equipment’s location and ensuring that mains drinking water which complies with all appropriate legislation is available to be supplied to the Equipment. If planning permission is required the Hirer must obtain such planning permission at its cost.
(c) To the extent permitted by law, CCE does not accept any liability for any loss or damage resulting from the performance of the installation work carried out by its employees or agents.
Installation of the Equipment. The Customer will provide suitable times for VitalCall to attend the Customer’s residence between 7:00am – 6:00pm, Monday to Sunday for the purpose of VitalCall installing, inspecting, repairing or removing the Equipment.
Installation of the Equipment. The Buyer will provide to prepare the space for the installation of the equipment and make available all electric, telephone and water connections, as well as all necessary construction works, based upon instructions which will be supplied by the vendor for this purpose. The Buyer will also supply all the means for the moving of the equipment as well as all personnel necessary to assist the Vendor's technicians. The equipment shall be shipped on a flat rack container, assembled and made ready for installation. The installation and the training of the Buyer's technicians will be performed in 2-3 weeks or in any case a period which will be deemed necessary. Cost for the vendor's technicians will be borne by the buyer as well as return travel costs, whether outside or within the Country of Buyer, as well as full board and lodging and air fare. The departure of the Vendor's technicians will take place after the buyer will have informed the vendor that the equipment has been placed as per agreed lay-out and that all electrical and telephone lines ( the latter to service the modem ) as well as water means will have been positioned as per instructions. After Sales Support Services Eurectec, Inc., can provide clients with a wide range of marketing support services including crumb rubber sales brokerage, after market product sales support and sales training and development programs. Details upon request. Eurectec, Inc. Pro forma If requested, we have included pro forma income statements for your reference, based on a number of assumptions, however, Eurectec, Inc., or its agents do not guarantee or warrant the figures shown, which are for indication purposes only and sales revenues and costs may vary from project to project and each clients market projections, are to be fully evaluated by independent means. We trust this provides you with an overview of our equipment and processes and we look forward to hearing from you, following your evaluation of the enclosed materials. Should you have any additional questions, please do not hesitate to contact the writer. We thank you for your interest in our products and services. Very truly yours, Eurectec, Inc. enclosures :
Installation of the Equipment. 6.1 Cyta undertakes the installation, wiring and configuration of the DSL Modem, the Splitter/Filter Equipment and the Set Top Box at the Subscriber’s premises, provided Cyta is their supplier. In case the Modem has not been provided by Cyta, Cyta shall not be held liable for the correct configuration and operation of the Modem.
6.2 During the installation Cyta shall follow the Subscriber’s instructions but shall not be liable for restoration in case of changes in the layout of the Subscriber’s premises due to the installation of the Equipment.
6.3 The Subscriber must provide a suitable space for placing the Equipment. Failure to do so may cause a delay in the provision of the Service.
6.4 The Subscriber must give access to the premises to Cyta’s personnel who will install the Equipment. In the case where Cyta’s personnel need to cross through or enter premises which belong to a third party in order to install the Equipment, the Subscriber shall be obliged to obtain the third party’s consent.
6.5 Cyta’s obligation for the installation of the Equipment is limited to the activation of the equipment and the confirmation that the Service is operating correctly, up to the television set. Cyta shall not be obliged to configure the operation of the Service through any other equipment and/or to set up such equipment.
Installation of the Equipment a. The FDOT shall install the Equipment as listed in Exhibit B attached hereto and by this reference made a part hereof with its own forces or through a contract let by the FDOT at FDOT’s sole cost and expense.
b. All installation of the Equipment shall be performed in compliance with the codes referred to in the reference section of the current version of the FDOT’s Utility Accommodation Manual.
c. The FDOT agrees to require its contractor to furnish liability insurance and indemnification for installation of the Equipment in accordance with the FDOT’s Standard Specifications for Road and Bridge Construction.
Installation of the Equipment the acquisition and installation therein and thereon of certain machinery, equipment and other personal property (collectively, the “Equipment”).
Installation of the Equipment. Where CommsFM have agreed to provide Installation Services, CommsFM shall use its reasonable endeavours to procure the Equipment is installed such that it is in proper working order as soon as practicable after delivery, but CommsFM shall not under any circumstances be liable to the Customer for the late installation of or any failure to install the Equipment.
