Installation, Operation Sample Clauses

Installation, Operation. Maintenance and Calibration of Measurement Systems. The Contractor shall be responsible for the installation, operation, maintenance and calibration of the measurement systems, under CNH’s supervision. The measurement system shall be supplied by the Contractor and will require approval by CNH, which will verify compliance with the Applicable Laws and Industry Best Practices. At the Contractor’s expense, an independent third party approved by CNH shall verify that the measurement system, its operation and its management are suitable and that it is measuring the volumes and quality of the Hydrocarbons within the parameters or uncertainty and tolerance established by CNH.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Installation, Operation. (i) Where the Equipment is hired for use in an event, the Customer shall be responsible for ensuring and hereby warrants that all necessary consents, permissions, licences and approvals have been obtained for that event.
Sample 1
Installation, Operation. Each Owner shall be responsible for obtaining all equipment necessary to show the Work of Art. There will be no shared equipment. Each Owner shall at all times comply with the written instructions and specifications provided by the Artist and his technical representatives with respect to the installation, and operation, of the Work of Art. Each Owner shall be solely responsible for carrying out, and bearing the costs associated with the installation, the routine day-to-day maintenance and operation of the Work of Art while it is on display at their institution.
Sample 1
Installation, Operation. No changes to the Generator or its related equipment, wiring, and connections to the Premises (together with the Generator, the “Generator Equipment”); shall be made without the prior written consent of Landlord, which shall not be unreasonably withheld. Landlord shall have the right, in its sole discretion, to disapprove any work that voids or adversely affects any warranty. Tenant, at its sole expense, shall operate the Generator Equipment in accordance with all applicable laws and requirements of all governmental and quasi-governmental authorities having jurisdiction over the Building (the “Codes”), including obtaining all permits required, and with all requirements or recommendations of Landlord’s insurer, lender, or both, and Landlord’s reasonable rules and regulations. Tenant shall pay the electrical utility provider directly for the electricity consumed or as billed by Landlord, if any. Landlord shall not be liable to Tenant for any stoppages or shortages of electrical power furnished to the Generator because of any act, omission, or requirement of any electrical utility provider, or the act or omission of any other tenant or licensee of the Project, or for any other cause beyond the control of Landlord. Landlord may from time to time relocate the Equipment, or any part of it, to other areas in, at, or upon the Project. Upon relocation of the Equipment, Tenant’s means of access and cabling will be relocated by Landlord or, at Landlord’s option, by Tenant, as required to operate and maintain the Equipment.
Sample 1

Related to Installation, Operation

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Building Services Labor Law Article 9 applies to Contracts for building service work over $1,500 with a public agency, that: (i) involve the care or maintenance of an existing building, or (ii) involve the transportation of office furniture or equipment to or from such building, or (iii) involve the transportation and delivery of fossil fuel to such building, and (iv) the principal purpose of which is to furnish services through use of building service employees.

  • Construction of the Tenant Improvements Landlord shall construct the Tenant Improvements in accordance with this exhibit and the construction contract to be executed by Landlord and its contractor(s). The construction contract for constructing the Tenant Improvements and the contractor(s) to perform the work shall be approved and/or selected, as the case may be, by Landlord at its sole and absolute discretion without the consent of Tenant.

  • Project 3.01. The Recipient declares its commitment to the objectives of the Project. To this end, the Recipient shall carry out the Project in accordance with the provisions of Article IV of the General Conditions.

  • Rooftop Equipment Provided that Tenant complies with the terms of ----------------- this Section, Tenant may, at its risk and expense, install a satellite dish and related communications equipment and wiring (collectively, the "Rooftop ------- Equipment") on the roof of the Building at a location approved by Landlord, --------- which equipment may be used solely by Tenant and its Permitted Transferees or Permitted Sublessees. Before installing the Rooftop Equipment, Tenant shall submit to Landlord for its approval (which approval shall be in Landlord's sole discretion) plans and specifications which (a) specify in detail the design, location, size, and, in the case of a satellite dish, frequency of the Rooftop Equipment and (b) are sufficiently detailed to allow for the installation of the Rooftop Equipment in a good and workmanlike manner and in accordance with all Laws (the "Legal Requirements"). If Landlord approves of such plans, Tenant ------------------ shall install (in a good and workmanlike manner), maintain and use the Rooftop Equipment in accordance with all Legal Requirements and shall obtain all consents and permits required for the installation and operation thereof; copies of all such permits and evidence of such consents must be submitted to Landlord before Tenant begins to install the Rooftop Equipment. Tenant shall thereafter maintain all permits necessary for the maintenance and operation of the Rooftop Equipment while it is on the Building and operate and maintain the Rooftop Equipment in such a manner so as not to unreasonably interfere with any other satellite, antennae, or other transmission facility on the Building's roof or in the Building. Landlord may require that Tenant screen the Rooftop Equipment with a parapet or other screening device acceptable to Landlord. Tenant shall maintain the Rooftop Equipment and screening device in good repair and condition. Tenant shall, at its risk and expense, remove the Rooftop Equipment (including all wiring related thereto), within five days after the occurrence of any of the following events: (1) the termination of Tenant's right to possess the Premises; (2) the termination of the Lease; (3) the expiration of the Term; or (4)

  • LANDLORD’S MAINTENANCE AND REPAIR Subject to Section 7.1 and Article XI, Landlord shall maintain in good operating condition and repair all parts of the Premises that are not Tenant’s obligation under Section 7.1 and all areas outside of the Premises including, without limitation, all portions and elements of the roof (including sky lights and related seals), foundations, footings, the exterior surfaces of the exterior walls of the Building (including exterior glass and doors), structural walls, passenger and freight elevators and the structural, life/safety, electrical and mechanical systems (except for HVAC systems and equipment) in or serving the Building, except that Tenant at its expense shall make all repairs which Landlord deems reasonably necessary as a result of the act or negligence of Tenant, its agents, employees, invitees, subtenants or contractors. Landlord shall have the right to employ or designate any reputable person or firm, including any employee or agent of Landlord or any of Landlord’s affiliates or divisions, to perform any service, repair or maintenance function. Landlord need not make any other improvements or repairs except as specifically required under this Lease, and nothing contained in this Section shall limit Landlord’s right to reimbursement from Tenant for reasonable maintenance, repair costs and replacement costs as provided elsewhere in this Lease (but subject to any limitations therein provided). Tenant understands that it shall not make repairs at Landlord’s expense or by rental offset. Tenant further understands that Landlord shall not be required to make any repairs to the roof, foundations, footings, the exterior surfaces of the exterior walls of the Building (excluding exterior glass), or structural, electrical or mechanical systems unless and until Tenant has notified Landlord in writing of the need for such repair and Landlord shall have a reasonable period of time thereafter to commence and complete said repair, if warranted. Except as set forth in Sections 2.4 and 4.2 of this Lease, all costs of any maintenance, repairs and replacement on the part of Landlord provided hereunder shall be considered part of Project Costs.

  • Premises Building Project and Common Areas 1.1 Premises, Building, Project and Common Areas.

  • Work Location While employed by the Company hereunder, the Executive shall perform his duties (when not traveling or engaged elsewhere in the performance of his duties) at the offices of the Company in Bermuda. The Executive shall travel to such places on the business of the Company in such manner and on such occasions as the Company may from time to time reasonably require.

  • Office Space Each employee shall be provided with office space which may be on a shared basis. The parties recognize the desirability of providing each employee with enclosed office space with a door lock, office equipment commensurate with assigned responsibilities, and ready access to a telephone. Each employee shall, consistent with building security, have reasonable access to the employee's office space and laboratories, studios, music rooms, and the like used in connection with assigned responsibilities; this provision may require that campus security provide access on an individual basis. Before an employee's office location is changed, or before there is a substantial alteration to an employee's office to a degree that impedes the employee's work effectiveness, the affected employee shall be notified, if practicable, at least one (1) month prior to such change.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!