LIST OF IMPROVEMENTS Sample Clauses

LIST OF IMPROVEMENTS. Prior to delivery of possession by Landlord to Tenant, Landlord, at Landlords sole cost and expense, shall construct the Demised Premises, as outlined on floor plan attached as Exhibit B and complete the improvements set forth below. Landlord to pay for all clean up associated with stated improvements.
Sample 1Sample 2
AutoNDA by SimpleDocs
LIST OF IMPROVEMENTS. Developer shall install, at his own expense (unless provisions appended hereto provide for public or other private participation) according to plans and specifications as approved by the Town and incorporated in this agreement by reference:
Sample 1
LIST OF IMPROVEMENTS. Tenant shall have the right to use the Tenant Improvement Allowance allocated to Tenant pursuant to the terms of Section 7 of this Third Amendment for the following scheduled Improvements in the Premises (which list of Improvements are subject to change);
Sample 1
LIST OF IMPROVEMENTS. The First Amendment Improvements shall include the following improvements in accordance with the Space Plan (Exhibit B-2):
Sample 1
LIST OF IMPROVEMENTS. Add double doors into the elevator lobby; • Add three (3) more meeting rooms (along Exit Corridor 2); • Convert the back walls of the conference rooms from glass to drywall (closest to Exit Corridor 2); • Add glass or transparent material wall between kitchen and seating area; • Add two (2) small interview rooms near the street entrance; • Add millwork storage, coat rack and lockers near elevator lobby; • Add glass wall parallel to Xxxxxxxx with double doors into the suite (from Lobby area) and add drywall perpendicular to Xxxxxxxx to create a secure Lobby area with one side glass and one side drywall; • Add mail room (not full height) behind the reception area (in Lobby area); and • Add a copy print area - counter and cabinets (location to be recommended by Landlord's architect). LIGHT FIXTURES: MFR: FINELITE TYPE: HP-4 PENDANT LED SIZE: 4" X 8' LENGTH MFR: EUREKA MODEL: 4271-CF T42-277V-DM7-AC60-MG-CLR SIZE: 16 INCHES LOCATION: BREAK ROOM MFR: FINELIGHT TYPE: HP4 RECESSED LINEAR LED FINELITE SIZE: 4" X 8'-0" MFR: LSI MODEL: LPASC24 SIZE: 2X4 LED LOCATION: PRIVATE OFFICES CONCRETE: TYPE: POLISHED CONCRETE, 800 GRIT WALL TILE: MFR: DALTILE STYLE: RETRO ROUNDS COLOR: BOLD WHITE TYPE: RRO2 SIZE: MOSAIC INSTALLATION: WALL BACKSPLASH BATHROOM FLOOR TILE: MFR: DALTILE STYLE: BEEHIVE 24/20 FIELD TILE COLOR: XXXX P010 TYPE: PORCELINE INSTALLATION: RESTROOM FLOOR WALL TILE: MFR: DALTILE STYLE: MODERN DIMESNSION GLAZED CERAMIC COLOR: MATTE ARCTIC WHITE 0790 DIMENSION: 4 ¼x 12 ¾ INSTALLATION: SHOWER/RESTROOM WALL CEILING TILE: MFR: XXXXXXXXX STYLE: ULTIMA TEGULAR FINE TEXTURE MODEL: 1942 DOOR FINISH: FINISH: SLICED MAPLE DOOR HARDWARE: MFR: SCHLAGE MODEL: VANDLGARD L-SERIES 06 FINISH: 626 SATIN CHROMIUM PLATED PLASTIC LAMINATE: MFR: FORMICA COLOR: MOUSE NUMBER: 928-58 FINISH: MATTE MFR: WILSONART LAMINATE STYLE: BLOND ECHO NUMBER: 7939K-18 FINISH: BROILE WHITE POLISHED PAINT: MFR: XXXX XXXXXXX PRODUCT: EVER30 COLOR: XXXXXXXX XXXXX DECORATOR'S WHITE FINISH: EGGSHELL, UON LOCATION: THROUGHOUT MFR: XXXX XXXXXXX PRODUCT: EVER30 COLOR: DE6375 CASTLEROCK FINISH: EGGSHELL, UON LOCATION: ACCENT MFR: XXXX XXXXXXX PRODUCT: EVER30 COLOR: DEC794S ALINA SPRINGS FINISH: EGGSHELL, UON LOCATION: ACCENT CARPET: MFR: INTERFACE STYLE: SILVER LININGS (SL910NICKEL) STYLE NUMBER:13877AK00 COLOR: 104502 NICKEL SIZE: 9"X39" BASE: MFR: ALLSTATE TYPE: RUBBER BASE COLOR: #A46 SIZE: 4" STRAIGHT -8- SOLID SURFACE: MFR: XXXXXX XXXXX COLOR: FROSTY CARRINA NUMBER: 5141 -10- TO: DATE: ,201 Attentio...
Sample 1
LIST OF IMPROVEMENTS. DOWNLOAD LATEST SETTINGS: From version 2.2 onwards, our BTC robots have the option to automatically download and apply the latest optimized settings directly from our servers. In BTC FAPTv2.2, this applies to BOTH the MTS mode as well as the Scalper mode. This is achieved with the new parameter DownloadLatestSettings which is true by default; if you switch off this parameter to false, the Bitcoin robot will switch to its basic unoptimized settings. As long as this parameter remains true, you won’t have to worry about manually applying new settings and keeping up-to-date with the markets. We’ve seen how updating the robot’s settings after every few months works well to help our robots stay on top of changing market trends. So, we will make it a point to ensure that our robots’ presets are updated regularly. The beauty of this version is that you won’t ever have to apply any of the updated settings manually; whenever we announce the release of new settings in the future, all you have to do is simply restart your MT4, and the robots will automatically download and apply the latest settings! (as long as DownloadLatestSettings remains True)
Sample 1
LIST OF IMPROVEMENTS. Within ten (10) days of the date of execution of this Definitive Agreement, Seller shall provide Buyer with, to the best of Seller s knowledge, information and belief, a list of all Improvements, assembled by Station location and Asset type.
Sample 1
AutoNDA by SimpleDocs
LIST OF IMPROVEMENTS.  TRADE DIRECTION: This is a new feature that allows you, as well as us at FapTurbo2, to exercise better control over the general trend direction of the trades allowed by the robot, i.e., this parameter determines if the robot should allow only Buy trades or only Sell trades or BOTH. By default, the robot checks with our servers to see which trade direction is allowed… usually, trades are allowed in both directions, i.e., Buy and Sell. More details about this feature later in this manual…  DOWNLOAD LATEST SETTINGS: Ever since version 2.2 onwards, our BTC robots have the feature to automatically download and apply the very latest optimized settings directly from our servers. In BTC FAPT2, this applies to BOTH the MTS mode as well as the Scalper mode. This is achieved with the new parameter DownloadLatestSettings which is true by default; if you switch off this parameter to false, the Bitcoin robot will switch to its basic unoptimized settings. As long as this parameter remains true, you won’t have to worry about manually applying new settings and keeping up-to-date with the markets. We’ve seen how updating the robot’s settings after every few months works well to help our robots stay on top of changing market trends. So, we will make it a point to ensure that our robots’ presets are updated regularly. The beauty of this version is that you won’t ever have to apply any of the updated settings manually; whenever we announce the release of new settings in the future, all you have to do is simply restart your MT4, and the robots will automatically download and apply the latest settings! (as long as DownloadLatestSettings remains True)  FAIL-SAFE for LATEST DOWNLOADED PRESETS: The robot has a backup / fail-safe mechanism built into it to ensure that it's not left hanging high and dry IF something should prevent it from downloading the latest MTS/Scalper settings for Bitcoin from our servers due to any unforeseen reason. The first time you run the robot on a pair and as soon as it connects successfully to our server, it will download the latest settings AND immediately create a backup. So, the next time around, if there's any connection problem or issue that prevents the robot from grabbing the latest settings, it will attempt to read the recent backup and obtain the most recent settings from there. In the unlikely event that BOTH attempts fail, then the robot will abort and report the issue on the chart as well as in the Experts tab.  INCREASED PROFITS with l...
Sample 1

Related to LIST OF IMPROVEMENTS

  • Location of Improvements; No Encroachments All improvements which were considered in determining the Appraised Value of the Mortgaged Property lay wholly within the boundaries and building restriction lines of the Mortgaged Property, and no improvements on adjoining properties encroach upon the Mortgaged Property. No improvement located on or being part of the Mortgaged Property is in violation of any applicable zoning law or regulation;

  • Construction of Improvements Lessee shall construct its planned facilities and install therein all necessary fixtures, equipment, and accessories, all of which shall be in accordance with the terms and conditions of this Lease and any applicable city code or FAA requirements. Lessee shall complete construction of the new improvements within one (1) year after the Effective Date of this Lease. Existing improvements shall be deemed to have been appropriately constructed so long as they are well-maintained and meet all applicable city code and FAA requirements. It is expressly understood that upon the expiration of the Lease, all hangar improvements shall become property of Lessor. 8.1 Lessee agrees to reimburse Lessor for the apportioned costs of roadway improvements including, but not limited to: excavation, paving, drainage, and fencing required for all extensions of the access road to the Leased Premises. Lessee shall be responsible for the cost of all extensions, as applicable, of all water, sewer, and other utilities to the Leased Premises, as well as any fees for obtaining service. Lessee shall be responsible for payment at the time improvements are completed. Lessee shall remit payment to Lessor within thirty (30) days from the date of invoice. 8.2 Lessee agrees to construct, at Lessee’s expense, aircraft access improvements, including without limitation driveways, taxi lanes, aprons, and ramps to its planned facility. Construction and location of the access improvements shall comply with specifications set forth by Lessor at the time of plan’s approval. Lessee understands that those portions of the constructed Airport access improvements situated outside the boundaries of the Leased Premises shall become, immediately upon their completion to Lessor’s satisfaction, the property of Lessor. All construction and any connections to the runway of any apron or taxi lane shall in addition be governed by any rules or regulations regarding Airport operations and must be approved of and overseen by Airport management. Constructed facilities shall not be occupied until access is completed and accepted by Lessor. 8.3 Upon completion of improvements, Lessee shall provide an 8 ½” x 11” site plan detailing a scaled drawing of the Leased Premises, hangar foot print, office area, parking, landscaping, and any other improvements. 8.4 The provisions provided above do not relieve Lessee from compliance with all applicable building code requirements and acquiring all necessary licenses and permits from any governmental authority. 8.5 If the aircraft hangar or other improvements on the Leased Premises are damaged or destroyed, Lessee shall do whatever is necessary to repair, rebuild, or restore the structure and other improvements to substantially the same condition existing prior to the damage or destruction within 180 days of the date of destruction. Upon written request from Lessee, Lessor may extend the 180-day timeline to the extent reasonably necessary due to conditions beyond the control of Lessee.

  • Existing Improvements All improvements located on the Site as of the date of execution of the Construction Contract, whether above or below the surface of the ground, including but not limited to existing buildings, utilities, infrastructure improvements and other facilities.

  • Condition of Improvements The risk of destruction or substantial damage by fire or Act of God prior to delivery of deed is assumed by Seller. Xxxxxx agrees that on possession, the Real Estate shall be in the same condition as it is on the date of this contract, except for ordinary wear and tear. If the Real Estate should be damaged or destroyed by fire or other casualty and if, prior to Closing, the real Estate shall not be repaired or restored by and at the Sellers expense, to a condition as good as it was prior to the damage or destruction, then Purchaser, at his option, may terminate this contract by written notice to Seller and the Down Payment Shall be returned to Purchaser. While this contract is pending, Sellers shall not change any existing lease or enter into any new lease, nor make any substantial alterations or repairs without the consent of the Purchaser. In addition, the Purchaser also has an insurable interest in the property from date of this contract. Purchaser is hereby notified that insurance should be placed upon the property immediately to protect Purchasers’ interest.

  • Tenant's Improvements If the Lessor is the Insuring Party, the Lessor shall not be required to insure Lessee Owned Alterations and Utility Installations unless the item in question has become the property of Lessor under the terms of this Lease. If Lessee is the Insuring Party, the policy carried by Lessee under this Paragraph 8.3 shall insure Lessee Owned Alterations and Utility Installations.

  • Lessee Improvements Lessee shall prepare final plans and ------------------- specifications for construction of the Lessee Improvements desired by Lessee and shall deliver to Lessor by July 1, 1999, two (2) copies of such plans and specifications and the names of two proposed contractors to construct the Lessee Improvements for Lessor approval. Lessor will promptly either approve of the plans and specifications and the contractors, or communicate its objections, and if Lessor has objections, the Lessor will work diligently with Lessee to resolve any objections such that approval of the plans and specifications and names of contractors is given within fifteen (15) days of receipt. Lessor shall be deemed to have approved the plans and specifications and the contractors unless Lessor shall have provided written notice to Lessee of Lessor's objections thereto within fourteen (14) days following the delivery thereof by Lessee to Lessor. The Lessor approved final plans and specifications for the Lessee Improvements are herein called the "Lessee Improvements Final Plans and Specifications". All reasonable costs involved in approving, drafting and preparing the Lessee Improvements Final Plans and Specifications shall be charged against the Improvement Allowance described below. Lessor shall apply for building permits to construct the Lessee Improvements and will submit bid requests to the two contractors selected by Lessee and the contractor for the Shell Building Improvements no later than two (2) days following approval of the Lessee Improvements Final Plans and Specifications. Contractors will be required to submit their bids no later than thirty (30) days following receipt of the bid request. Lessee shall have fifteen (15) days from receipt of all bids to select the contractor for the Lessee Improvements. Except for immaterial field changes, modifications to the Lessee Improvements Final Plans and Specifications must be made and accepted only by written change order or agreement signed by Lessor and Lessee and will constitute an amendment to this Lease. Lessee shall be responsible for payment in advance of all work and construction resulting from changes in the Lessee Improvements Final Plans and Specifications requested by Lessee if the additional cost attributable to the changes exceed the Improvement Allowance by more than $3.00 as described in subparagraph (c) below. The Lessee Improvements Final Plans and Specifications (when approved by Lessor and Lessee) are incorporated in this Lease by reference. For the purpose of this Section, an "immaterial field change" shall mean such field changes which are required by any governmental authority or changes which (i) do not affect the size, configuration, structural integrity, quality, character, architectural appearance and standard of workmanship contemplated in the Lessee Improvements Final Plans and Specifications, (ii) will not result in any default in any obligation to any person or violation of any governmental requirements, and (iii) the cost of or reduction resulting from any single field change or extra does not exceed $5,000.00.

  • Completion of Improvements Within 90 days of completion of any construction herein permitted, Company will cause to be prepared and delivered to Authority record documents as required under the Tenant Work Permit process, including but not limited to as-builts, legal descriptions, boundary surveys, and certified final cost of construction. The submission of record document electronic media will be in accordance with Authority’s Standard Procedure for computer aided design and drafting and drawings, as may be revised from time to time.

  • ALTERATIONS & IMPROVEMENTS Tenant shall not make any alterations, additions or improvements or do any type of construction to the Property without first obtaining Landlord's written consent. Unless prior written agreement is reached between Tenant and Landlord, any such alterations, additions, improvements or construction shall become part of the Property and shall remain at the expiration of Tenant's Lease term. If Landlord approves of alterations, additions, improvements or construction in writing and Tenant intends to use contractors to undertake such work, the contractors must first be approved in writing by Landlord. Tenant must also place any funds to cover the amount of any alterations, additions, improvements or construction in an escrow account approved by Landlord before the commencement of the work. Landlord shall designate the times and manner of the work being done, exclusively.

  • Disbursements for Site Improvements All payments made by the OPWC for site improvements or other work shall be made directly to the Contractor that performed the work and originated the invoice, unless the request is for disbursement to the Recipient.

  • Improvements The buildings, structures, fixtures, additions, enlargements, extensions, modifications, repairs, replacements and improvements now or hereafter erected or located on the Land (collectively, the “Improvements”);

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!