Tank (for each tank Sample Clauses

Tank (for each tank. Tank foundation including, but not limited to, excavation, framing, pouring and finishing of concrete. TANK CONTRACTOR is not required to provide any purely aesthetic finishing for the Phase 2 Tanks. • Foundation for all superstructure supports, control and junction boxes, pipe and electrical/instrument supports within Battery Limits. • Concrete test reports shall be provided for all installed concrete, both the tank and the piling. • Jacking reports, if required, shall be submitted for prior approval by the PURCHASER, and resubmitted when complete. Surveillance Procedure shall be prepared by TANK CONTRACTOR and submitted for review. • Erection/installation of inner 9% Ni steel tank, including all insulation. • Carbon steel domed roof and interior aluminum suspended insulated deck. • Provide NDE procedures. Perform NDEs in accordance with API 620 and NFPA 59A and Project Specification requirements. • Provide testing procedure for outer tank in accordance with API 620. Pressure test shall include a calibrated recording instrument capable of accounting for barometric pressure and ambient temperature changes. • Prior to any welding being performed on the tank, TANK CONTRACTOR shall submit its welding procedures to PURCHASER for review and approval. Welding procedures shall be based on the actual metallurgy to be used in the final installations. This review and approval by PURCHASER shall not be construed as relieving TANK CONTRACTOR of the responsibility of welding in a safe and workmanlike manner, and all welds shall be in accordance with Good Engineering and Construction Practices. • All welders must pass a welders qualification test procedure, which shall be in accordance with ASME section IX, and which shall be submitted to and approved by PURCHASER prior to the commencement of any welding. All welders’ test records shall be submitted to PURCHASER. • All radiographs shall be made available to PURCHASER for review upon request and turned over to PURCHASER upon completion of the Work. “As-built” drawings shall indicate the locations of radiographs. The NDE/Radiographic inspections shall be in accordance with Project Specifications and Code (API 620 and NFPA 59A) requirements. The Parties agree that digital radiography is an acceptable form of NDE. • PURCHASER reserves the right to perform visual and NDE inspections on all materials at the delivery point, including fabrication shop(s). • TANK CONTRACTOR is responsible for hydrotesting of inner tank and monit...
AutoNDA by SimpleDocs

Related to Tank (for each tank

  • Delivery Points The measurement of and tests for quality of Shipper's Gas redelivered at the Delivery Points shall be governed by and determined in accordance with the requirements of the receiving pipeline at each Delivery Point.

  • Elevator Service If the Building is equipped with elevators, Landlord, during Normal Business Hours of Building, shall furnish elevator service to Tenant to be used in common with others. At least one elevator shall remain in service during all other hours. Landlord may designate a specific elevator for use as a service elevator.

  • Key Deal Points You are the exclusive, unencumbered owner of the Asset(s), and you have honestly and accurately represented the Asset(s) to the best of your knowledge and ability. §We have agreed with you to a purchase price and form of consideration to be paid for each Asset, as outlined below. §For a period of time from the date of this Purchase Agreement (the “Period”), you grant us the exclusive right to purchase the Asset(s).

  • STORAGE TANKS AND SUMPS 3.1 Is any above or below ground storage of gasoline, diesel, petroleum, or other Hazardous Materials in tanks or sumps proposed in, on or about the Premises? Existing Tenants should describe any such actual or proposed activities. Yes [ ] No [ ] If yes, please explain:

  • Storage Tanks If storage tanks storing Hazardous Materials located on the Premises or the Project are used by Tenant or are hereafter placed on the Premises or the Project by Tenant, Tenant shall install, use, monitor, operate, maintain, upgrade and manage such storage tanks, maintain appropriate records, obtain and maintain appropriate insurance, implement reporting procedures, properly close any storage tanks, and take or cause to be taken all other actions necessary or required under applicable state and federal Legal Requirements, as such now exists or may hereafter be adopted or amended in connection with the installation, use, maintenance, management, operation, upgrading and closure of such storage tanks. Notwithstanding anything to the contrary contained herein, Tenant shall have no right to use or install any underground storage tanks at the Project.

  • Metering 1. If the Producer desires to sell electric power to the Company, the Company shall provide, own and maintain at the Producer's expense all necessary meters and associated equipment to be utilized for the measurement of energy and capacity for determining the Company's payment to the Producer pursuant to an applicable agreement.

  • Spares/bunkers, etc The Sellers shall deliver the Vessel to the Buyers with everything belonging to her on board and on shore. All spare parts and spare equipment including spare tail-end shaft(s) and/or spare propeller(s)/propeller blade(s), if any, belonging to the Vessel at the time of inspection used or unused, whether on board or not shall become the Buyers' property, but spares on order are to be excluded. Forwarding charges, if any, shall be for the Buyers' account. The Sellers are not required to replace spare parts including spare tail-end shaft(s) and spare propeller(s)/propeller blade(s) which are taken out of spare and used as replacement prior to delivery, but the replaced items shall be the property of the Buyers. The radio installation and navigational equipment shall be included in the sale without extra payment if they are the property of the Sellers. Unused stores and provisions shall be included in the sale and be taken over by the Buyers without extra payment. The Sellers have the right to take ashore crockery, plates, cutlery, linen and other articles bearing the Sellers' flag or name, provided they replace same with similar unmarked items. Library, forms, etc., exclusively for use in the Sellers' vessel(s), shall be excluded without compensation. Captain's, Officers' and Crew's personal belongings including the slop chest are to be excluded from the sale, as well as the following additional items (including items on hire): Please see Clause 19 The Buyers bunkers are the Charterers property and are to be excluded from the sale. The shall take over the remaining bunkers and unused lubricating oils in storage tanks and sealed drums shall remain the property of the sellers. Vessel’s new managers will pay sellers for these lubricating oils at net contract price as and when they are broached and pay the current net market price (excluding barging expenses) at the port and date of delivery of the Vessel. Payment under this Clause shall be made at the same time and place and in the same currency as the Purchase Price.

  • Manner of Conveyance; Limited Warranty; Nonrecourse; Etc THE CONVEYANCE OF ALL ASSETS, INCLUDING REAL AND PERSONAL PROPERTY INTERESTS, PURCHASED BY THE ASSUMING BANK UNDER THIS AGREEMENT SHALL BE MADE, AS NECESSARY, BY RECEIVER’S DEED OR RECEIVER’S XXXX OF SALE, “AS IS”, “WHERE IS”, WITHOUT RECOURSE AND, EXCEPT AS OTHERWISE SPECIFICALLY PROVIDED IN THIS AGREEMENT, WITHOUT ANY WARRANTIES WHATSOEVER WITH RESPECT TO SUCH ASSETS, EXPRESS OR IMPLIED, WITH RESPECT TO TITLE, ENFORCEABILITY, COLLECTIBILITY, DOCUMENTATION OR FREEDOM FROM LIENS OR ENCUMBRANCES (IN WHOLE OR IN PART), OR ANY OTHER MATTERS.

  • HEATING, VENTILATING AND AIR CONDITIONING The Tenant will operate and regulate those portions of the heating, ventilating, and air conditioning equipment within and serving the Leased Premises so as to maintain such reasonable conditions of temperature and humidity within the Leased Premises as are determined by the Landlord and its Architect and engineers so that no direct or indirect appropriation of the heating, ventilating and air conditioning from the other portions of the Building occurs. The Tenant shall comply with such stipulations and with all Rules and Regulations of the Landlord pertaining to the operation and regulation of such equipment. The Tenant shall immediately notify the Landlord in the event that any repairs are required to the heating, ventilating and air conditioning equipment serving the Leased Premises and shall reimburse the Landlord as part of its Proportionate Share of Operating Costs for the cost of any maintenance, repairs or replacements made by the Landlord in respect of the heating, ventilating and air conditioning equipment serving the Leased Premises. The Landlord acknowledges that the Tenant shall not be responsible for the cost of capital repairs and capital replacements in respect of the heating, ventilating and air conditioning equipment serving the Leased Premises provided that such capital repairs and capital replacements are not necessitated by the Tenant's incorrect or negligent use of equipment. The Tenant shall not under any circumstances go onto the roof of the Building or make any maintenance repairs or replacements to the heating, ventilating and air conditioning systems in the Building without the prior written consent of the Landlord. If the Tenant fails to comply with such stipulations and Rules and Regulations, the Landlord shall be entitled to take such steps as it deems advisable to correct such defaults (including, without limitation, entering upon the Leased Premises and assuming control of such equipment) without liability to the Tenant, and the Tenant will pay to the Landlord forthwith upon demand as Additional Rent all costs and expenses incurred by the Landlord in so doing. The Landlord represents and warrants to the Tenant that the heating, ventilating and air conditioning equipment serving the Leased Premises and required to be installed by the Landlord pursuant to Schedule "C" is and will be at the Commencement Date in good working order and condition.

  • Speed (a) The Contract Price shall not be affected or changed by reason of the trial speed (as determined according to the SPECIFICATIONS being less than the guaranteed speed, if such variation is not more than Two-Tenths (2/10) of One (1) knot.

Time is Money Join Law Insider Premium to draft better contracts faster.