Time-outs Sample Clauses

Time-outs. The Services are subject to certain restrictions on continuous use in order to maintain the security and integrity of Sprint's network and the Services. A. The Services are subject to the following session time-outs: 1. Idle session timeout = 60 minutes 2. Maximum session timeout = 10 hours B. The calculation of time for each session type will be measured from the time a new session is authenticated and authorized. End-users who are timed-out will not be prevented from reconnecting to the network.
AutoNDA by SimpleDocs
Time-outs. The Corporation shall be entitled to postpone for a period of time (which in the judgment of the Corporation is reasonable under the circumstances) the filing of any registration statement otherwise required to be prepared and filed by it pursuant to Section 2.1 if the Corporation determines, in its reasonable judgment, that such registration and offering would interfere with any financing, acquisition, corporate reorganization or other proposed material transaction involving the Corporation or any of its Affiliates or that it would require the Corporation to disclose material non-public information that it deems advisable not to disclose and promptly gives PTFM written notice of such determination. Further, the Corporation shall have the right to require PTFM participating not to sell securities in a public offering for a period of up to 90 days during the effectiveness of any registration statement if the Corporation shall determine that such sale would interfere with any transaction involving the Corporation as described above or that such registration would require disclosure of such material non-public information. If pursuant to the preceding sentence the Corporation has required PTFM to discontinue the sale of securities during the effectiveness of a registration statement, then the period of time any such registration statement must be kept effective pursuant to Section 2.3(ii) hereof shall be extended for a period equal to the length of such discontinuance.
Time-outs. Also, tickets where there is a direct financial impact on the business or issues that may result in non-compliance. 4 Hours 12 Hours 24 Hours P3 Normal Errors that are non-disabling or cosmetic and clearly have little or no impact on the normal operation of the services, e.g. minor performance degradation, maintenance task 12 Hours 48 hours 80 hours *AWT = Agent Working Time: This is the time a ticket spends with Chevin for action during the allocated agent’s working hours. If a ticket is passed back to the customer for action the status will be changed to PENDING, at which time we are no longer accruing time. When the customer responds to the ticket, the status will return to Open and agent working time will accrue again. Each Chevin Fleet Solutions customer will have a designated Customer Success Manager. The role of the Customer Success Managers is to help the Customer with Chevin Fleet Solutions product adoption, including sharing Chevin Fleet Solutions best practice advice, guidance on helping the Customer derive maximum value from Chevin products and services, and helping to escalate technical issues as necessary. The Customer is responsible for its evaluation and for any implementation of the Customer Success Manager’s recommendations. You can contact the Customer Success Team by emailing: xxxxxxxxxxxxxxx@xxxxxxxxxxx.xxx. Contact details for the assigned Customer Success Manager will also be provided. Reproducible errors that are at risk of breaching the target resolution time will be escalated by the Chevin team to higher support tiers for further investigation, analysis and urgent action, based on the following approach and workflow: • Ticket within 2 hours of breaching target resolution time: Triggers emailed escalation to Level 2 and ticket flagged on dashboard • Ticket breaching target resolution time: Triggers emailed escalation to Level 3 and ticket flagged on Level 3 dashboard • Ticket significantly exceeding target resolution time by 2, 4 or 12 hours for urgent, high and normal tickets respectively, triggers emailed escalation to Level 4, ticket flagged on Level 4 dashboard and daily swarm review. Customers can also communicate with support agents to request the escalation of a ticket. If you need additional escalation support, please reach out to your Customer Success Manager and they will help to escalate the issue for you within Chevin Fleet Solutions. Chevin Fleet Solutions escalation matrix: 1 Agent Owning the Ticket 2 Technical Suppor...
Time-outs. Two (2) full 1 minute time outs and two 30-second time outs will be allowed per game.

Related to Time-outs

  • Close-outs Subrecipient’s obligation to County shall not end until all close-out requirements are completed. Activities during this close-out period shall be completed in accordance with federal and State regulations and shall include, but are not limited to: making final payments; submitting final invoice(s), report(s), in accordance with the requirements of Paragraph 49, and documentation; disposing of program assets (including the return to County of all unused materials and equipment); remitting any program income balances and accounts receivable to County, and determining the custodianship of records. Notwithstanding the foregoing, the terms of this Contract shall remain in effect during any period that the Subrecipient has control over CDBG funds, including Program Income.

  • Line Outage Costs Notwithstanding anything in the NYISO OATT to the contrary, the Connecting Transmission Owner may propose to recover line outage costs associated with the installation of Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades on a case-by-case basis.

  • Under-Frequency and Over Frequency Conditions The New York State Transmission System is designed to automatically activate a load- shed program as required by the NPCC in the event of an under-frequency system disturbance. Developer shall implement under-frequency and over-frequency relay set points for the Large Generating Facility as required by the NPCC to ensure “ride through” capability of the New York State Transmission System. Large Generating Facility response to frequency deviations of predetermined magnitudes, both under-frequency and over-frequency deviations, shall be studied and coordinated with the NYISO and Connecting Transmission Owner in accordance with Good Utility Practice. The term “ride through” as used herein shall mean the ability of a Generating Facility to stay connected to and synchronized with the New York State Transmission System during system disturbances within a range of under-frequency and over-frequency conditions, in accordance with Good Utility Practice and with NPCC Regional Reliability Reference Directory # 12, or its successor.

  • Benchmark Unavailability Period Upon the Borrower’s receipt of notice of the commencement of a Benchmark Unavailability Period, the Borrower may revoke any pending request for a SOFR Borrowing of, conversion to or continuation of SOFR Loans to be made, converted or continued during any Benchmark Unavailability Period and, failing that, the Borrower will be deemed to have converted any such request into a request for a Borrowing of or conversion to Base Rate Loans. During a Benchmark Unavailability Period or at any time that a tenor for the then-current Benchmark is not an Available Tenor, the component of Base Rate based upon the then-current Benchmark or such tenor for such Benchmark, as applicable, will not be used in any determination of Base Rate.

  • Weekend Differential Employees assigned to State institutions other than Maine State Prison shall be eligible for a weekend differential of fifty cents ($.50) per hour to the base for shifts beginning between 10:00 p.m. Friday and 9:59 p.m.

  • Wash-Up Time 37.01 Where the Employer determines there is a clear-cut need, wash-up time, to a maximum of ten (10) minutes immediately before the end of a work period, will be permitted.

  • Call Outs a) Employees who have performed a regular shift and who respond to a request to return to work additional time shall be compensated as follows: i. Employees shall receive a minimum of two (2) hours pay at the applicable overtime rate or for actual hours worked whichever is greater; or ii. If the call out is within eight (8) hours of the start of the regular shift then the Employee shall receive a minimum of three (3) hours at the applicable overtime rate.

  • Downtime There may be downtime during the Migration. The duration of the downtime will depend on the amount of data that Agency is migrating. Axon will work with Agency to minimize any downtime. Any VIEVU mobile application will need to be disabled upon Migration.

  • Clean-up Time Employees shall be allowed reasonable time during the workday or shift for clean-up purposes.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!