Break Bulk Terminal Operation Sample Clauses

Break Bulk Terminal Operation. (a) A break bulk terminal operation may be established upon the mutual agreement of an Employer and a Local Union as long as such agreement is equal to the standards established by this Break Bulk Negotiating Committee. Failing agreement, shall come before this Break Bulk Negotiating Committee for approval. (b) Employers who operate a break bulk operation shall establish a scheduled workweek consisting of any five (5) consecutive days out of a seven (7) day period. (c) Forty (40) hours shall constitute a normal week’s work. All em- ployees required to report for work on their unscheduled days shall be guaranteed a minimum of eight (8) hours’ work at their applica- ble premium rate of time and one-half. Any time worked in excess of eight (8) hours on those days shall be paid for at one and one-half times the applicable premium rate. Breakbulk operations may insti- tute straight time eight (8) hour shifts with two (2) twenty (20) min- ute paid breaks upon mutual agreement between the parties. (d) In the event of absenteeism on any schedule commencing with- in a calendar day the vacancy may be filled by: (1) A regular seniority employee, in laid-off status, in seniority order. (2) A non-seniority or casual employee. (e) When the number of employees on a schedule is increased, the work is assigned: (1) A regular seniority employee, in laid off status, in seniority order. (2) An eligible, qualified employee that has completed his regular schedule and is available for a sixth punch, except that spare em- ployees up to 15% of the total employees on the dock and yard list, may be used prior to the calling of employees for premium time. Seniority shall prevail. (3) Available non-seniority or casual employee. (f) Holidays—Article 49 will apply; however, in the event the schedules are maintained and work performed on the holiday, em- ployees will work their assigned schedules and will be paid the rate of time and one-half (1-1/2) in addition to the eight (8) hours’ holi- day pay. Replacements for absentees on a holiday will be worked in accordance with Item (e). (g) Break bulk operation includes dock work, switching assign- ments inside the yard, shuttle to and from compounds and terminals. (h) All local pickup and delivery performed on Saturday, Sunday or a holiday shall be treated as work performed under the terms of Ar- ticle 53, Section 3 of the New England Supplemental Agreement. (i) The parties agree all employees working in the classifications of dockwork and ...
Sample 1
AutoNDA by SimpleDocs
Break Bulk Terminal Operation. (a) A break bulk terminal operation may be established upon the mutual agreement of an Employer and a Local Union as long as such agreement is equal to the standards established by this Break Bulk Negotiating Committee. Failing agreement, shall come before this Break Bulk Negotiating Committee for approval. (b) Employers who operate a break bulk operation shall establish a scheduled workweek consisting of any five (5) consecutive days out of a seven (7) day period. (c) Forty (40) hours shall constitute a normal week’s work. All employees required to report for work on their unscheduled days shall be guaranteed a minimum of eight (8) hours’ work at their applicable premium rate of time and one-half. Any time worked in excess of eight (8) hours on those days shall be paid for at one and one-half times the applicable premium rate. Breakbulk operations may institute straight time eight (8) hour shifts with two (2) twenty
Sample 1Sample 2

Related to Break Bulk Terminal Operation

  • Commercial Operation (i) On or before December 31, 2021, Interconnection Customer must demonstrate commercial operation of all generating units. Demonstrating commercial operation includes achieving Initial Operation in accordance with Section 1.4 of Appendix 2 to this ISA and making commercial sales or use of energy, as well as, if applicable, obtaining capacity qualification in accordance with the requirements of the Reliability Assurance Agreement Among Load Serving Entities in the PJM Region.

  • Synchronization, Commissioning and Commercial Operation 4.1.1 The Power Producer shall give at least fifteen (15) days written notice to the SLDC / ALDC / DISCOM as the case may be, of the date on which it intends to synchronize the Power Project to the Grid System. 4.1.2 Subject to Article 4.1.1, the Power Project may be synchronized by the Power Producer to the Grid System when it meets all the connection conditions prescribed in the Grid Code and otherwise meets all other Indian legal requirements for synchronization to the Grid System. 4.1.3 The synchronization equipment and all necessary arrangements / equipment including Remote Terminal Unit (RTU) for scheduling of power generated from the Project and transmission of data to the concerned authority as per applicable regulation shall be installed by the Power Producer at its generation facility of the Power Project at its own cost. The Power Producer shall synchronize its system with the Grid System only after the approval of GETCO / SLDC / ALDC and GEDA. 4.1.4 The Power Producer shall immediately after each synchronization / tripping of generator, inform the sub-station of the Grid System to which the Power Project is electrically connected in accordance with applicable Grid Code. 4.1.5 The Power Producer shall commission the Project within SCOD. 4.1.6 The Power Producer shall be required to obtain Developer and/ or Transfer Permission, Key Plan drawing etc, if required, from GEDA. In cases of conversion of land from Agricultural to Non-Agriculture, the commissioning shall be taken up by GEDA only upon submission of N.A. permission by the Power Producer. 4.1.7 The Power Producer shall be required to follow the Forecasting and Scheduling procedures as per the Regulations issued by Hon’ble GERC from time to time. It is to clarify that in terms of GERC (Forecasting, Scheduling, Deviation Settlement and Related Matters of Solar and Wind Generation Sources) Regulations, 2019 the procedures for Forecasting, Scheduling & Deviation Settlment are applicable to all solar generators having combined installed capacity above 1 MW connected to the State Grid / Substation including those connected via pooling stations.

  • Verizon Operations Support Systems Verizon systems for pre- ordering, ordering, provisioning, maintenance and repair, and billing.

  • Co-operation Each Party acknowledges that this ESA must be approved by the Department and agree that they shall use Commercially Reasonable efforts to cooperate in seeking to secure such approval.

  • Emergency Mode Operation Plan Contractor must establish a documented plan to enable continuation of critical business processes and protection of the security of electronic County PHI or PI in the event of an emergency. Emergency means any circumstance or situation that causes normal computer operations to become unavailable for use in performing the work required under this Agreement for more than twenty-four (24) hours.

  • Commercial Operation Date 6.4.1 The SPV shall ensure that the Project Commercial Operation Date is achieved on or prior to the Scheduled Commercial Operation Date. The SPV shall provide a written notice to MSEDCL at least 30 (thirty) days in advance intimating MSEDCL of the proposed date on which the Commercial Operation Date of a Unit or the Project is proposed to be achieved. 6.4.2 If the Commercial Operation Date for the Units having a capacity equivalent to at least 75% (seventy five percent) of the Contracted Capacity is achieved before the Scheduled Commercial Operation Date, then all Units in respect of which the Commercial Operation Date has been achieved prior to the Scheduled Commercial Operation Date would be eligible for incentives as follows: (a) the Unit(s) injecting energy at 11 kV /22 kV shall be given an incentive of Rs. 0.25/ kWh; and (b) the Unit(s) injecting energy at 33 kV shall be given an incentive of Rs. 0.15/ kWh, for the power sold to MSEDCL for the first 3 (three) years from the Commercial Operation Date. To receive such incentives from MSAPL, which shall be over and above the Tariff, the SPV shall follow the process agreed to by the SPV under the Implementation Agreement. 6.4.3 It is hereby clarified that the aforementioned incentive shall not be available: (i) in respect of any Unit if the Commercial Operation Date for such Unit has not been achieved prior to the Scheduled Commercial Operation Date; and (ii) if the aggregate capacity of the Units for which the Commercial Operation Date has been achieved prior to Scheduled Commercial Operation Date is less than 75% (seventy five percent) of the Contracted Capacity. 6.4.4 In the event that Commercial Operation Date for any of the Units is achieved after the Scheduled Commercial Operation Date, the SPV shall be liable to pay Liquidated Damages as per the provisions set out below. 6.4.5 Without prejudice to any other rights of MSEDCL under this PPA, in case one or more Units of the SPV are unable to achieve Commercial Operation Date within a period of 2 (two) months from the Scheduled Commercial Operation Date, the capacity of such Units shall be annulled, and the Contracted Capacity shall be reduced to that extent. For Illustration: The Project has a Contracted Capacity of 100 MW and comprises of 10 Units of 10 MW each. If at the end of the aforementioned period of 14 (fourteen) months from the Effective Date, the SPV has achieved Commissioning for only 8 out of 10 Units, then the Contracted Capacity of the Project will stand reduced for the capacity of the 2 Units which have not been Commissioned, i.e. the Contracted Capacity will be 80 (100 (original Contracted Capacity)) – 10 (capacity of each Unit)*2 (number of Units not Commissioned).

  • Pre-Commencement Phase Services The services required to be provided by the Contractor for the Pre- Commencement Phase of the Project in accordance with the Contract Documents.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Infertility Services This plan covers the following services, in accordance with R.I. General Law §27-20-20. • Services for the diagnosis and treatment of infertility if you are:

  • Operational Control Directing the operation of the Transmission Facilities Under ISO Operational Control to maintain these facilities in a reliable state, as defined by the Reliability Rules. The ISO shall approve operational decisions concerning these facilities, made by each Transmission Owner before the Transmission Owner implements those decisions. In accordance with ISO Procedures, the ISO shall direct each Transmission Owner to take certain actions to restore the system to the Normal State. Operational Control includes security monitoring, adjustment of generation and transmission resources, coordination and approval of changes in transmission status for maintenance, determination of changes in transmission status for reliability, coordination with other Control Areas, voltage reductions and Load Shedding, except that each Transmission Owner continues to physically operate and maintain its facilities.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!