Contract Supplement Sample Clauses

Contract Supplement. A signed memorandum from the Department that notifies the County of increases or decreases to funding or time extensions in the Contract. A Contract Supplement requires the signature of the Department but does not require the signature of the County.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Contract Supplement. The Company shall pay you a one-time cash contract supplement of $2,000,000, which will be paid to you within thirty (30) days after the Effective Date; provided, that if the Employment Period is terminated prior to the second anniversary of the Effective Date for any reason other than by the Company without Cause or by you for Good Reason, you shall immediately reimburse the Company for the full $2,000,000 amount of the contract supplement; provided further, that if the Employment Period is terminated following the second anniversary but prior to the fourth anniversary of the Effective Date for any reason other than by the Company without Cause or by you for Good Reason, you shall immediately reimburse the Company for $1,000,000 of the contract supplement. In the event that you fail to fully reimburse the Company for the applicable amount described in the preceding sentence, the Company shall be entitled to offset, in accordance with (and to the extent permitted by) Section 409A of the Code, against any amounts otherwise payable to you.
Sample 1Sample 2
Contract Supplement. District policies, rules and regulations pertaining to transportation of pupils, eligibility, discipline and driver training, whether currently in effect or as modified by District Board of Trustees' action, shall be considered a part of this contract and the Contractor assents to the provisions of the same. By board of Public Education rule, Standards for School Buses in Montana, it is now law that all certified school bus drivers are required to receive at least ten hours of training annually. Therefore it is the contractor’s responsibility to comply with this law. The Transportation Director will schedule meetings or provide alternate options to fulfill this requirement. If a contractor fails to receive ten hours of training each year, it will be a breach of this contract. If additional meetings beyond this requirement are scheduled, the Contractor will be compensated at an hourly rate equal to the Federal Minimum Wage.
Sample 1Sample 2
Contract Supplement. 11.1 You must treat in absolute confidence all information acquired in the course of employment, which is not public knowledge. This obligation continues to apply after the employment relationship has ended. The collection, supply and forwarding of information to third parties, as well as publications in word, text, image or sound in respect of technical matters and other issues concerning the Xxxxxx Biomet Group, require the express consent of the Company. In connection with your employment with Xxxxxx GmbH, relevant personal data will be collected and processed. The details relating to the collection and processing of these data are contained in the EEA and Switzerland Employee Privacy Policy and Notice (the “Privacy Policy”, which is available on the Company’s intranet site, The Circle, on the Privacy page. In particular, the Privacy Policy provides information on the specific categories of personal data collected, the reasons for collection of the data, how the data is processed and shared, how it is safeguarded, how it is transferred within the Xxxxxx Biomet Group as well as to authorized third parties, and how it may be transferred outside of the EEA and Switzerland. The Privacy Policy also contains information on how to exercise the right to access, amend, or rectify the data, as well as who to contact in case of questions or in cases where the rights might have been violated. 11.2 The following documents build an integral part of this employment contract, if not otherwise specified in this contract: • Collective Employment Agreement of the Engineering Industry (GAV) • Contractual Employment Conditions Zimmer (Arbeitsvertragliche Bestimmungen Zimmer, AVB) • Terms and conditions of the “Sulzer Vorsorgeeinrichtung (SVE)” and terms and conditions of the “Johann Xxxxx Xxxxxx Stiftung (JJS) • Xxxxxx Biomet Code of Business Conduct and Ethics • Confidentiality, Non-Competition, and Non-Solicitation Agreement • Xxxxxx Biomet “Cross Border Local Hire Policy” • European Car Policy • Privacy Policy • HR Conflicts of Interest Policy • Compliance-related Policies 11.3 In the event of any discrepancies between this contract of employment and the general contract terms, the contract of employment shall take precedence over the general contract terms.
Sample 1
Contract Supplement. (a) It is further agreed that is the participant who will carry out the practices and treatment for which cost-share payments will be made. Therefore, all cost-share payments for restoration practices shall be made by . Application for Payment shall be signed . (b) It is further agreed that modification documents shall be signed in the name by .
Sample 1
Contract Supplement. 11.1 You must treat all information acquired in the course of employment, which is not public knowledge, with absolute confidentiality. This obligation continues to apply after the employment relationship has ended. The collection, supply and forwarding of information to third parties, as well as publications in word, text, image or sound in respect of technical matters and other issues concerning the company, require the express consent of the company. 11.2 The following documents form an integral part of this agreement, if not otherwise specified in this agreement: • Collective Employment Agreement of the Engineering Industry (GAV) • Employee Handbook (Arbeitsvertragliche Bestimmungen Zimmer, AVB) • Swiss Working Time Regulation (Arbeitszeitreglement Schweiz) • Terms and conditions of the “Sulzer Vorsorgeeinrichtung (SVE)” and terms Conditions of the “Johann Xxxxx Xxxxxx Stiftung (JJS)” Code of Business Conduct • Confidentiality, Non-Competition, and Non-Solicitation Agreement • Agreement of Waiver to Register Working Hours • EEA and Switzerland Employee Privacy Policy and Notice You acknowledge that you have read and understood the enclosed EEA and Switzerland Employee Privacy Policy and Notice. 11.3 In the event of any discrepancies between this agreement and the general contract terms, this agreement shall take precedence over the general contract terms.
Sample 1

Related to Contract Supplement

  • Contract Supremacy In the case of a conflict between the express terms of this Agreement and the terms of the ISO Agreement, the express terms of this Agreement shall prevail.

  • Contract Schedule The information set forth in the Contract Schedule is true and correct.

  • CONTRACT SCOPE Pursuant to this Contract, Contractor is authorized to sell and provide only those Goods and/or Services set forth in Exhibit A – Included Goods/Services for the prices set forth in Exhibit B – Prices for Goods/Services. Contractor shall not represent to any Purchaser under this Contract that Contractor has contractual authority to sell or provide any Goods and/or Services beyond those set forth in Exhibit A – Included Goods/Services.

  • Product Supply 5.1 In the event that Eisai notifies Radius of its desire to purchase bulk substance of Compound from Radius, Radius shall supply Eisai with all amount of such bulk substance of Compound, which meets specifications for the Product determined by Radius in the course of its Development activities pursuant to this Agreement, required by Eisai for commercial sales of Product in Japan With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai the bulk substance of Compound for * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of the bulk substance of Compound required for clinical trials in Japan. Radius shall charge [*] for applicable bulk substance of Compound. Radius shall ship such bulk substance of Compound, FOB point of manufacturing. 5.2 In the event that Eisai notifies Radius of its desire to purchase Semi-Product from Radius which meets specifications determined by Radius in the course of its Development activities pursuant to this Agreement, Radius shall supply Eisai with all amount of Semi-Product required by Eisai for commercial sales of Product in Japan. With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai Semi-Product for the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of Semi-Product required for clinical trials in Japan. Radius shall charge [*] for Semi-Product. Radius shall ship such Semi-Product, FOB point of manufacturing. 5.3 The Parties agree that they shall, in good faith, discuss, negotiate and execute necessary agreements containing mutually acceptable terms, including but not limited to, a supply agreement for either bulk substance of Compound or Semi-Product as well as a quality control agreement of either bulk substance of Compound or Semi-Product, in the event that Eisai notifies Radius as set forth in Article 5.1 or 5.2. 5.4 As manufacturer of the Product, Radius shall be responsible for: (a) the control of the quality of the Product promoted and sold under the Radius trademarks; as provided in Article 2.3; and (b) ensuring that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable good manufacturing practices (GMP) and shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product; and Radius warrants that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable GMP and * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product and will be free from defects in material and workmanship. Radius shall resolve any product liability issues in the Territory relating to the Product and shall resolve any product liability issues in Japan relating to the Product or the bulk substance of Compound or Semi-Product, as the case may be, supplied to Eisai pursuant to this Article 5 in the event and to the extent related to a breach of the warranty set forth in Article 5.4(b) at its own expense and subject to Article 5.5. 5.5 Radius’ obligations with respect to product liability in the Territory and Japan shall include the following responsibilities, each to be taken at Radius’ expense: (a) Radius shall report, at its expense, to appropriate authorities, in accordance with local requirements, all adverse events related to use of the Product in the Territory or Japan. Eisai shall provide to Radius, upon Radius’ request, reasonable assistance in connection with the reporting of all of adverse events, responding to safety queries and assessing safety issues, in each case, to the extent related to the Product in Japan. Adverse events shall be recorded in a single, centralized database, which shall be held and owned by Radius. Radius will provide, upon request by Eisai, any safety information in Radius’ control and reasonably required by Eisai in connection with the development and commercialization of the Product in Japan and all reasonable assistance in responding to safety queries related to the Product and in assessing safety issues related to the Product in Japan. Details of safety reporting activities relating to the Product will be addressed in a pharmacovigilance contract, which the Parties shall enter into after the Effective Date. (b) In the event that (i) Radius determines that an event, incident, or circumstance may result in the need for a recall or other removal of the Product or any lot or lots thereof from the market; (ii) any regulatory authority in the Territory threatens to remove a Product from the market; or (iii) any regulatory authority in the Territory requires distribution of a “Dear Doctor” letter or its equivalent regarding the use of Product, Radius shall promptly advise Eisai in writing, and shall provide Eisai with copies of all relevant correspondence, notices and the like. Notwithstanding anything the contrary herein, Radius shall have final authority to make all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product in the Territory. After establishing SC pursuant to Article 3.5, all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product shall be decided by the SC as set forth in Article 3.6; provided that in the event that the Parties take different positions with respect to recall, market withdrawal or other corrective action with respect to the Product, then Radius shall have the right to cease supplying bulk substance of Compound or Semi-Product to Eisai for Japan if, after good faith discussions with Eisai, Radius reasonably believes that that continued supply to Eisai exposes Radius to liability as a result of its decision with respect to the Territory. If Radius elects to cease supply, it will terminate supply in an orderly manner, as soon as practical and in accordance with a schedule agreed to by Eisai and Radius. In the event of a recall, market withdrawal or other corrective action with respect to the Product in Japan, and at Radius’ request, Eisai shall provide reasonable assistance to Radius, at Radius’ cost and expense, in conducting any such recall, market withdrawal or other corrective action with respect to the Product in Japan. 5.6 THE WARRANTY IN SECTION 5.4(b) IS IN LIEU OF ANY OTHER WARRANTY WITH RESPECT TO THE PRODUCT, BULK SUBSTANCE OF COMPOUND OR SEMI-PRODUCT SUPPLIED BY RADIUS HEREUNDER, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).

  • Additional Description If any additional information would help describe the property, include it here. Step 3 – Identify Lease Term 7.

  • CONTRACT SUM 9.1.1 The Contract Sum is stated in the State-Contractor Agreement and, including authorized adjustments thereto, is the total amount payable by the State to the Contractor for the performance of the Work under the Contract Documents.

  • ATTACHMENT B FORM OF RELEASE AGREEMENT

  • ATTACHMENT C STANDARD STATE PROVISIONS FOR CONTRACTS AND GRANTS

  • PRODUCT SUPPORT Partners may provide support for Products and other value-added services, and Partner is responsible for the performance of any services it provides. If Customer purchases Microsoft Support Services through a Partner, Microsoft will be responsible for the performance of those services subject to the terms of this Agreement.

  • Project Summary The main objective of the LIFE GAIA Sense project is to demonstrate gaiasense, an innovative “Smart Farming” (SF) solution that aims at reducing the consumption of natural resources, as a way to protect the environment and support Circular Economy (CE) models. More specifically, this project will launch 18 demonstrators across Greece, Spain and Portugal covering 9 crops (olives, peaches, cotton, pistachio, potatoes, table tomatoes, industrial tomatoes, grapes, kiwi) in various terrain and microclimatic conditions. They will demonstrate an innovative method, based on high-end technology, which is suitable for being replicated and will be accessible and affordable to Farmers either as individuals or collectively through Agricultural Cooperatives. Moreover, LIFE GAIA Sense aims to promote resource efficiency practices in SMEs of the agricultural sector and eventually, contribute to the implementation of the Roadmap to a Resource Efficient Europe. This project will demonstrate a method on how the farmer will be able to decide either to use or avoid inputs (irrigation, fertilizers, pesticides etc.) in a most efficient way, without risking the annual production. The focus is on the resource consumption reduction side of CE, and the results will be both qualitatively and quantitatively, considering the resources’ efficiency in agricultural sector.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!