Development of the Security Management Plan Sample Clauses

Development of the Security Management Plan. 3.2.1 Within [20] Working Days after the Commencement Date and in accordance with paragraph 3.4 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. 3.2.2 If the Security Management Plan, or any subsequent revision to it in accordance with paragraph 3.4 (Amendment and Revision), is approved by the Customer it will be adopted immediately and will replace the previous version of the Security Management Plan. If the Security Management Plan is not approved by the Customer the Supplier shall amend it within 10 Working Days or such other period as the parties may agree in writing of a notice of non- approval from the Customer and re-submit to the Customer for approval. The parties will use all reasonable endeavours to ensure that the approval process takes as little time as possible and in any event no longer than 15 Working Days (or such other period as the parties may agree in writing) from the date of its first submission to the Customer. If the Customer does not approve the Security Management Plan following its resubmission, the matter will be resolved in accordance with the Dispute Resolution Procedure. No approval to be given by the Customer pursuant to this paragraph 3.2.2 of this schedule may be unreasonably withheld or delayed. However any failure to approve the Security Management Plan on the grounds that it does not comply with the requirements set out in paragraph 3.3.4 shall be deemed to be reasonable.
Sample 1Sample 2Sample 3See All (20)
AutoNDA by SimpleDocs
Development of the Security Management Plan. 3.2.1 Within 20 Working Days after the Effective Date (or such other period specified in the Implementation Plan or as otherwise agreed by the Parties in writing) and in accordance with paragraph 3.4 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. 3.2.2 If the Security Management Plan, or any subsequent revision to it in accordance with paragraph 3.4 (Amendment and Revision), is approved by the Customer it will be adopted immediately and will replace the previous version of the Security Management Plan. If the Security Management Plan is not approved by the Customer the Supplier shall amend it within 10 Working Days or such other period as the Parties may agree in writing of a notice of non-approval from the Customer and re-submit to the Customer for approval. The Parties will use all reasonable endeavours to ensure that the approval process takes as little time as possible and in any event no longer than 15 Working Days (or such other period as the Parties may agree in writing) from the date of its first submission to the Customer. If the Supplier does not achieve the approval of the Security Management Plan following its resubmission, the matter will be resolved in accordance with the dispute resolution procedure in Clause 23.2. However where the Customer does not approve the Security Management Plan on the grounds that it does not comply with the requirements set out in paragraph 3.3.4, this shall be deemed to be reasonable.
Sample 1Sample 2Sample 3See All (17)
Development of the Security Management Plan. Within [twenty (20)] Working Days after the Commencement Date (or such other period specified in the Implementation Plan or as otherwise agreed by the Parties in writing) and in accordance with paragraph 4.2 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. If the Security Management Plan, or any subsequent revision to it in accordance with paragraph 4.2 (Amendment and Revision), is Approved it will be adopted immediately and will replace the previous version of the Security Management Plan. If the Security Management Plan is not Approved the Supplier shall amend it within ten (10) Working Days or such other period as the Parties may agree in writing of a notice of non-approval from the Customer and re-submit to the Customer for approval. The parties will use all reasonable endeavours to ensure that the approval process takes as little time as possible and in any event no longer than fifteen (15) Working Days (or such other period as the parties may agree in writing) from the date of its first submission to the Customer. If the Customer does not approve the Security Management Plan following its resubmission, the matter will be resolved in accordance with the Dispute Resolution Procedure. No approval to be given by the Customer pursuant to this paragraph 3.2.2 may be unreasonably withheld or delayed. However where the Customer does not approve the Security Management Plan on the grounds that it does not comply with the requirements set out in paragraph 4 shall be deemed to be reasonable. The Security Management Plan will set out the security measures to be implemented and maintained by the Supplier in relation to all aspects of the Services and all processes associated with the delivery of the Services and shall at all times comply with and specify security measures and procedures which are sufficient to ensure that the Services comply with the provisions of this Contract (including this Schedule, the principles set out in paragraph 2.2 and any other elements of this Contract relevant to security or any data protection guidance produced by the Customer); The Security Management Plan (including the draft version) should also set out the plans for transiting all security arrangements and responsibilities from those in place at the Commencement Date to those incorporated in the Supplier’s ISMS at the da...
Sample 1Sample 2See All (6)
Development of the Security Management Plan. Within [20] Working Days after the Commencement Date and in accordance with paragraph 1.7 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan.
Sample 1
Development of the Security Management Plan. 3.2.1 Within [twenty (20)] Working Days after the Call Off Commencement Date (or such other period specified in the Implementation Plan or as otherwise agreed by the Parties in writing) and in accordance with paragraph 3.4 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. If the Security Management Plan, or any subsequent revision to it in accordance with paragraph 3.4 (Amendment and Revision), is Approved it will be adopted immediately and will replace the previous version of the Security Management Plan. 3.2.2 If the Security Management Plan is not Approved the Supplier shall amend it within ten (10) Working Days or such other period as the Parties may agree in writing of a notice of non-approval from the Customer and re-submit to the Customer for approval. The parties will use all reasonable endeavours to ensure that the approval
Sample 1
Development of the Security Management Plan. Within twenty (20) Working Days after the Call Off Commencement Date (or such other period specified in the Implementation Plan or as otherwise agreed by the Parties in writing) and in accordance with paragraph 3.4 (Amendment and Revision), the Supplier will prepare and deliver to the Customer for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. If the Security Management Plan, or any subsequent revision to it in accordance with paragraph 3.4 (Amendment and Revision), is Approved it will be adopted immediately and will replace the previous version of the Security Management Plan.
Sample 1
Development of the Security Management Plan. Within twenty (20) Working Days after signature of this Contract and in accordance with paragraph 3.4 of this Schedule, the CONTRACTOR will prepare and deliver to the CUSTOMER for approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan set out in Annex B of this Schedule.
Sample 1
AutoNDA by SimpleDocs
Development of the Security Management Plan. 4.3.1 Within twenty (20) Working Days after the Start Date and in accordance with Paragraph 4.4, the Supplier shall prepare and deliver to the Buyer for Approval a fully complete and up to date Security Management Plan which will be based on the draft Security Management Plan. 4.3.2 If the Security Management Plan submitted to the Buyer in accordance with Paragraph 4.3.1, or any subsequent revision to it in accordance with Paragraph 4.4, is Approved it will be adopted immediately and will replace the previous version of the Security Management Plan and thereafter operated and maintained in accordance with this Schedule. If the Security Management Plan is not Approved, the Supplier shall amend it within ten
Sample 1

Related to Development of the Security Management Plan

  • PROFESSIONAL DEVELOPMENT AND EDUCATIONAL IMPROVEMENT A. The Board of Education agrees to pay the actual tuition costs of courses taken by a teacher at accredited colleges or universities up to three courses per two (2) year fiscal periods from July 1, 2006 to June 30, 2008 and July 1, 2008 to June 30, 2010 respectively, except as follows: 1. No teacher may be reimbursed for courses taken during the first year of teaching in Vineland. 2. Teachers taking courses in the second and third years of employment in Vineland will not receive remuneration until tenure has been secured. The remuneration will then be retroactive and will be paid to the teacher in a lump sum within sixty (60) days after the teacher has secured tenure. 3. All courses must be pre-approved by the Superintendent or his designee subject to the following requirements: (a) A teacher must provide official documentation that he/she has obtained a grade of B or better; (b) Reimbursement shall be paid only for courses directly related to teacher’s teaching field which increase the teacher’s content knowledge and are related to the teacher’s current certification, as determined by the Superintendent or his/her designee in his/her sole discretion; no reimbursement shall be paid for courses leading to a post graduate or professional degree in a field other than education or teaching. Further, effective September 1, 2010, all newly hired teachers shall not be eligible for reimbursement until they are tenured, and they shall not be eligible for retroactive reimbursement upon gaining tenure for courses taken prior to being tenured. (c) The maximum total payments to be made by the Board shall not exceed $130,000.00. Courses shall be applied for no earlier than the following dates: Summer Session - April 1 Fall/Winter Session - June 1 Spring Session - October 1 Courses must, as set forth hereinabove in this sub-article 18.A.3, be pre-approved by the Superintendent or his designee, prior to the teacher commencing the course(s); and (d) Teacher taking courses shall sign a contract requiring them to reimburse the Board for all tuition paid for a course if the teacher shall voluntarily leave the employ of the Board within one (1) full school/academic year of completion of said course, except that reimbursement shall not be required when the teacher shall voluntarily leave the employ of the Board due to a significant, documented life change. 4. Tuition reimbursement costs shall be a sum not to exceed the actual cost of college credits charged in an accredited public State college/University of the State of New Jersey. B. When the Superintendent initiates in-service training courses, workshops, conferences and programs designed to improve the quality of instruction, the cooperation of the Vineland Education Association will be solicited. Notwithstanding the above, the initiation of in-service training courses, workshops, conferences and programs shall be determined solely at the discretion of the Board. C. One professional leave day may be granted to a teacher upon request, according to the following guidelines: 1. The professional day may be for attendance at a workshop, seminar or visit to another school for the expressed purpose of self professional improvement for the job. 2. The request shall arrive in the office of the Superintendent of Schools at least ten (10) working days prior to the date requested and shall be reviewed by the immediate supervisor prior to submission. The Board reserves the right to deny a professional leave day before or immediately following a holiday or on a day which by its nature suggests a hardship for providing a substitute. 3. No more than two teachers from any one elementary school or from any one department in the secondary schools may be granted a professional leave for a given day. 4. The teacher may be required to submit a report to the Superintendent of Schools, Assistant Superintendent, supervisor (s), principal and staff regarding the activity of the professional day. 5. Costs incurred by the teacher for the professional day authorized under this Section shall be the teacher’s responsibility. 6. A maximum of 90 professional leave days may be authorized for the school year which shall be apportioned as follows: elementary, 35; grades seven and eight, 20; and high school, 35. D. If the Board initiates a teacher’s attendance at a professional workshop, seminar or visit, the expenses shall be the responsibility of the Board. Further, this day shall not be subtracted from the 90 professional leave days granted to teachers of the Association. E. The Board agrees to pay the full cost of courses taken by secretaries related to skills and knowledge improvement when such courses are required and approved by the Board. F. The Board and the Association agree that it is important to communicate when developing and implementing current and future learning technologies, including but not limited to distance and on-line learning.

  • Project Management Plan 3.2.1 Developer is responsible for all quality assurance and quality control activities necessary to manage the Work, including the Utility Adjustment Work. Developer shall undertake all aspects of quality assurance and quality control for the Project and Work in accordance with the approved Project Management Plan, Good Industry Practice and applicable Law. 3.2.2 Developer shall develop the Project Management Plan and its component parts, plans and other documentation in accordance with the requirements set forth in Section 1.5.2.5

  • Development Services During the term of this Agreement, the Provider agrees to provide to or on behalf of the Port the professional services and related items described in Exhibit A (collectively, the “Development Services”) in accordance with the terms and conditions of this Agreement. The Provider specifically agrees to include at least one Port representative in any economic development negotiations or discussions in which the Provider is involved concerning (i) a port-related business prospect or (ii) a business transaction which will ultimately require Port involvement, financial or otherwise.

  • Management Plan The Management Plan is the description and definition of the phasing, sequencing and timing of the major Individual Project activities for design, construction procurement, construction and occupancy as described in the IPPA.

  • Construction Management Plan Contractor shall prepare and furnish to the Owner a thorough and complete plan for the management of the Project from issuance of the Proceed Order through the issuance of the Design Professional's Certificate of Material Completion. Such plan shall include, without limitation, an estimate of the manpower requirements for each trade and the anticipated availability of such manpower, a schedule prepared using the critical path method that will amplify and support the schedule required in Article 2.1.5 below, and the Submittal Schedule as required in Article 2.2.3. The Contractor shall include in his plan the names and resumés of the Project Superintendent, Project Manager and the person in charge of Safety.

  • Alignment with Modernization Foundational Programs and Foundational Capabilities The activities and services that the LPHA has agreed to deliver under this Program Element align with Foundational Programs and Foundational Capabilities and the public health accountability metrics (if applicable), as follows (see Oregon’s Public Health Modernization Manual, (xxxx://xxx.xxxxxx.xxx/oha/PH/ABOUT/TASKFORCE/Documents/public_health_modernization_man ual.pdf): a. Foundational Programs and Capabilities (As specified in Public Health Modernization Manual) b. The work in this Program Element helps Oregon’s governmental public health system achieve the following Public Health Accountability Metric: c. The work in this Program Element helps Oregon’s governmental public health system achieve the following Public Health Modernization Process Measure:

  • Development of the Project 4.1 TSP's obligations in development of the Project: a. for procuring and maintaining in full force and effect all Consents, Clearances and Permits, required in accordance with Law for development of the Project; b. for financing, constructing, owning and commissioning each of the Element of the Project for the scope of work set out in Schedule 1 of this Agreement in accordance with: i. the Electricity Act and the Rules made thereof; ii. the Grid Code; iii. the CEA Regulations applicable, and as amended from time to time, for Transmission Lines and sub-stations: • the Central Electricity Authority (Technical Standards for Connectivity to the Grid) Regulations, 2007; • Central Electricity Authority (Technical Standards for construction of Electrical Plants and Electric Lines) Regulation, 2010; • Central Electricity Authority (Grid Standard) Regulations, 2010; • Central Electricity Authority (Safety requirements for construction, operation and maintenance of Electrical Plants and Electrical Lines) Regulation, 2011; • Central Electricity Authority (Measures relating to Safety and Electricity Supply) Regulation, 2010; • Central Electricity Authority (Technical Standards for Communication System in Power System Operation) Regulations, 2020. iv. Safety/ security Guidelines laid down by the Government; v. Prudent Utility Practices, relevant Indian Standards and the Law; not later than the Scheduled COD as per Schedule 2 of this Agreement; c. for entering into a Connection Agreement with the concerned parties in accordance with the Grid Code. d. for owning the Project throughout the term of this Agreement free and clear of any encumbrances except those expressly permitted under Article 15 of this Agreement; e. to co-ordinate and liaise with concerned agencies and provide on a timely basis relevant information with regard to the specifications of the Project that may be required for interconnecting the Project with the Interconnection Facilities; f. for providing all assistance to the Arbitrators as they may require for the performance of their duties and responsibilities; g. to provide to the Nodal Agency and CEA, on a monthly basis, progress reports with regard to the Project and its execution (in accordance with prescribed form) to enable the CEA to monitor and co-ordinate the development of the Project matching with the Interconnection Facilities; h. to comply with Ministry of Power order no. 25-11/6/2018 – PG dated 02.07.2020 as well as other Guidelines issued by Govt. of India pertaining to this; i. to procure the products associated with the Transmission System as per provisions of Public Procurement (Preference to Make in India) orders issued by Ministry of Power vide orders No. 11/5/2018 - Coord. dated 28.07.2020 for transmission sector, as amended from time to time read with Department for Promotion of Industry and Internal Trade (DPIIT) orders in this regard (Procuring Entity as defined in above orders shall deemed to have included Selected Bidder and/ or TSP). Also, to comply with Department of Expenditure, Ministry of Finance vide Order (Public Procurement No 1) bearing File No. 6/18/2019- PPD dated 23.07.2020, Order (Public Procurement No 2) bearing File No. 6/18/2019-PPD dated 23.07.2020 and Order (Public Procurement No. 3) bearing File No. 6/18/2019-PPD, dated 24.07.2020, as amended from time to time, regarding public procurement from a bidder of a country, which shares land border with India; j. to submit to Nodal Agency information in the prescribed format [To be devised by Nodal Agency] for ensuring compliance to Article 4.1 i) above. k. to comply with all its obligations undertaken in this Agreement. 4.2 Roles of the Nodal Agency in implementation of the Project: 4.2.1 Subject to the terms and conditions of this Agreement, the Nodal Agency shall be the holder and administrator of this Agreement and shall inter alia: a. appoint an Independent Engineer within 90 days of the Effective Date b. provide letters of recommendation to the concerned Indian Governmental Instrumentality, as may be requested by the TSP from time to time, for obtaining the Consents, Clearances and Permits required for the Project; c. coordinate among TSP and upstream/downstream entities in respect of Interconnection Facilities; and d. monitor the implementation of the Agreement and take appropriate action for breach thereof including revocation of guarantees, cancellation of Agreement, blacklisting etc e. provide all assistance to the Arbitrators as required for the performance of their duties and responsibilities; and f. perform any other responsibility (ies) as specified in this Agreement.

  • Medical Services Plan Regular Full-Time and Temporary Full-Time Employees shall be entitled to be covered under the Medical Services Plan commencing the first day of the calendar month following the date of employment. The City shall pay one hundred percent (100%) of the premiums required by the plan.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • MANAGEMENT OF EVALUATION OUTCOMES 12.1 Where the Employer is, any time during the Employee’s employment, not satisfied with the Employee’s performance with respect to any matter dealt with in this Agreement, the Employer will give notice to the Employee to attend a meeting; 12.2 The Employee will have the opportunity at the meeting to satisfy the Employer of the measures being taken to ensure that his performance becomes satisfactory and any programme, including any dates, for implementing these measures; 12.3 Where there is a dispute or difference as to the performance of the Employee under this Agreement, the Parties will confer with a view to resolving the dispute or difference; and 12.4 In the case of unacceptable performance, the Employer shall – 12.4.1 Provide systematic remedial or developmental support to assist the Employee to improve his performance; and 12.4.2 After appropriate performance counselling and having provided the necessary guidance and/or support as well as reasonable time for improvement in performance, the Employer may consider steps to terminate the contract of employment of the Employee on grounds of unfitness or incapacity to carry out his or her duties.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!