Test and Inspections Sample Clauses

Test and Inspections. The District shall furnish or otherwise retain inspection or testing services in connection with construction of the Project as required by applicable code, regulation, ordinance or the terms of the Construction Contract. The District shall provide, if required by applicable code, regulation or rule or by conditions encountered, tests or inspections for hazardous or toxic materials.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Test and Inspections. 13.2.1 If either the Contract Documents or laws, ordinances, rules, regulations or orders of any public authority having jurisdiction over the Project requires any Work to be inspected, tested, or approved, the Contractor shall assume full responsibility therefore, pay all costs in connection therewith and furnish County the required certificates or inspection, testing or approval. 13.2.2 Contractor shall give County timely notice of readiness of the Work for all inspections, tests or approvals. If any such Work required to be inspected, tested or approved is covered without written approval of County, it must, if requested by County, be uncovered for observation, and such uncovering shall be at Contractor’s expense unless Contractor has given County timely notice of its intention to cover such Work and County has not acted with reasonable promptness in response to such notice. 13.2.3 Observation, inspections, tests or approvals by County or persons other than Contractor shall not relieve Contractor from its obligations to perform the Work in accordance with the requirements of the Contract Documents. 13.2.4 The County will provide all required tests necessary for field control of project. Generally these tests are proctors, densities, bearing value, and concrete quality tests. All mix designs such as asphalt, concrete, or soil cement will be furnished and paid for by the contractor. Any pre-manufactured products such as pipe, inlets, steel, etc., will require a certified mill analysis report. Any tests that have to be repeated because of failure to meet specifications will be deducted from final payment to contractor, costs of tests to be current industry rate as determined by the engineer.
Sample 1Sample 2Sample 3
Test and Inspections. 13.2.1 If either the Contract Documents or laws, ordinances, rules, regulations or orders of any public authority having jurisdiction over the Project requires any Work to be inspected, tested, or approved, the Contractor shall assume full responsibility therefore, pay all costs in connection therewith and furnish County the required certificates or inspection, testing or approval. 13.2.2 Contractor shall give County timely notice of readiness of the Work for all inspections, tests or approvals. If any such Work required to be inspected, tested or approved is covered without written approval of County, it must, if requested by County, be uncovered for observation, and such uncovering shall be at Contractor’s expense unless Contractor has given County timely notice of its intention to cover such Work and County has not acted with reasonable promptness in response to such notice. 13.2.3 Observation, inspections, tests or approvals by County or persons other than Contractor shall not relieve Contractor from its obligations to perform the Work in accordance with the requirements of the Contract Documents.
Sample 1Sample 2
Test and Inspections. The Design-Build Entity shall be responsible for and coordinate any and all inspections required by any governmental body that has jurisdiction over the Project. Failure to obtain any permits, licenses, or other approvals because of the failure of the Design-Build Entity to conform to this paragraph will not extend the Contract Time and the contractor shall not be entitled to an increase in the Contract Price therefore. Further, the Design-Build Entity shall be liable to the Owner for any financial damage such failure may cause the Owner. The Owner will pay for all testing and inspection including the special inspections, structural, mechanical, chemical, air and water pollution tests, tests for hazardous materials, and other laboratory and environmental tests, inspections and reports required by law or the Contract Documents, however, the Design-Build Entity shall be responsible for costs related to any tests or re-tests required for corrective work attributable to the Design-Build Entity.
Sample 1
Test and Inspections. If the Contract Documents, laws, ordinances, rules, regulations or order of any public authority having jurisdiction require any Work to specifically be inspected, tested or approved by someone other than the CONTRACTOR, the CONTRACTOR will give the OWNER'S REPRESENTATIVE timely notice of readiness therefor. The CONTRACTOR will furnish the OWNER'S REPRESENTATIVE with the required certificates of inspection, testing or approval. All such tests will be in accordance with the methods prescribed by the American Society for Testing and Materials or such other applicable organizations as may be required by law or the Contract Documents. If any such Work required to be inspected, tested or approved is covered without written approval of the OWNER'S REPRESENTATIVE, it shall, if requested by the OWNER'S REPRESENTATIVE, be uncovered for observation at the CONTRACTOR'S expense. The cost of all such inspections, tests and approvals shall be borne by the CONTRACTOR unless otherwise provided.
Sample 1
Test and Inspections. 13.5.1 Tests, inspections and approvals of portions of the Work required by the Contract Documents or by laws, ordinances, rules, regulations or orders of public authorities having jurisdiction shall be made at an appropriate time. Unless otherwise provided by Subparagraph 2.2.4 or elsewhere in the Contract Documents, the Contractor shall make arrangements for such tests, inspections and approvals with an independent testing laboratory or entity acceptable to the Owner, provided by the Owner, or with the appropriate public authority, and shall bear all related costs of tests, inspections and approvals unless otherwise provided in the Contract Documents. The Contractor shall give the Owner and Design Professional timely notice of when and where tests and inspections and approvals are to be made so that the Design Professional may be present for such procedures. The Owner shall bear costs of tests, inspections or approvals which do not become requirements until after bids are received or negotiations concluded. 13.5.2 If the Design Professional, Owner or public authorities having jurisdiction determine that portions of the Work require additional testing, inspection or approval not included under Subparagraph 13.5.1, the Design Professional will, upon written authorization from the Owner, 13.5.3 If such procedures for testing, inspection, or approval under Subparagraphs 13.5.1 and 13.5.2 reveal failure of the portions of the Work to comply with requirements established by the Contract Documents, all costs made necessary by such failure including those of repeated procedures and compensation for the Design Professional's services and expenses shall be at the Contractor's expense. 13.5.4 Required certificates of testing, inspection or approval shall, unless otherwise required by the Contract Documents, be secured by the Contractor and promptly delivered to the Design Professional and to the Owner. 13.5.5 If the Design Professional is to observe tests, inspections or approvals required by the Contract Documents, the Design Professional will do so promptly and, where practicable, at the normal place of testing. 13.5.6 Tests or inspections conducted pursuant to the Contract Documents shall be made promptly to avoid unreasonable delay in the Work.
Sample 1
Test and Inspections. VIETNAM DIGITAL shall without undue delay after the Products arrival at the final destination make a visual inspection of appearance of the package, the packing list, labeling and Product certificate in accordance with sound business practice. In the event that the Products are shipped directly to the end user, VIETNAM DIGITAL is responsible for such visual inspection of appearance to be made by the end user. In the event that any defaults are detected under the visual inspection of appearance, VIETNAM DIGITAL shall without undue delay notify ANGUSTOS. If ANGUSTOS has not received a written notification within 30 (thirty) days after the delivery, the inspection of appearance shall be regarded as accepted and ANGUSTOS shall be released from any obligations or liability due to any Product defects which VIETNAM DIGITAL (or, as the case may be, the end user) could reasonably have detected under the inspection of appearance. • PRODUCT WARRANTIES • General performance of the Product: ANGUSTOS warrants that • The Products are in conformity with the Specifications • The Products are free of any flaws in design. Workmanship and materials and • The Products fulfill public requirement regarding environment, quality and safety applying in the territory. • Warranty period: The warranty period shall be 24 months after Delivery, provided, however, that the period shall be extended by up to three (3) months if and to the extent that the actual Products have been stored on the VIETNAM DIGITAL ’s warehouse or in a bonded warehouse prior to the delivery to end user (the “Warranty Period”).
Sample 1
AutoNDA by SimpleDocs
Test and Inspections. 13.5.1 Test, inspections and approval of portions of the Work required by the Contract Document or by laws, ordinances, rules, regulations or orders of public authorities having jurisdiction shall be made at an appropriate time. Unless otherwise provided, the XXXX Contractor shall make arrangements for such tests, inspections and approvals with the Owner’s designated testing entity. The XXXX Contractor shall give the Owner and the Architect timely notice of when and where tests and inspections are to be made so that the Owner and the Architect may observe such procedures. The Owner shall bear the cost of tests, inspections or approvals.
Sample 1
Test and Inspections 
Sample 1Sample 2

Related to Test and Inspections

  • Tests and Inspections § 15.5.1 Tests, inspections and approvals of portions of the Work shall be made as required by the Design-Build Documents and by applicable laws, statutes, ordinances, codes, rules and regulations or lawful orders of public authorities. Unless otherwise provided, the Design-Builder shall make arrangements for such tests, inspections and approvals with an independent testing laboratory or entity acceptable to the Owner, or with the appropriate public authority, and shall bear all related costs of tests, inspections and approvals. The Design-Builder shall give the Owner timely notice of when and where tests and inspections are to be made so that the Owner may be present for such procedures. The Owner shall bear costs of (1) tests, inspections or approvals that do not become requirements until after bids are received or negotiations concluded, and (2) tests, inspections or approvals where building codes or applicable laws or regulations prohibit the Owner from delegating their cost to the Design-Builder. § 15.5.2 If the Owner determines that portions of the Work require additional testing, inspection or approval not included under Section 15.5.1, the Owner will instruct the Design-Builder to make arrangements for such additional testing, inspection or approval by an entity acceptable to the Owner, and the Design-Builder shall give timely notice to the Owner of when and where tests and inspections are to be made so that the Owner may be present for such procedures. Such costs, except as provided in Section 15.5.3, shall be at the Owner’s expense. § 15.5.3 If such procedures for testing, inspection or approval under Sections 15.5.1 and 15.5.2 reveal failure of the portions of the Work to comply with requirements established by the Design-Build Documents, all costs made necessary by such failure shall be at the Design-Builder’s expense. § 15.5.4 Required certificates of testing, inspection or approval shall, unless otherwise required by the Design-Build Documents, be secured by the Design-Builder and promptly delivered to the Owner. § 15.5.5 If the Owner is to observe tests, inspections or approvals required by the Design-Build Documents, the Owner will do so promptly and, where practicable, at the normal place of testing. § 15.5.6 Tests or inspections conducted pursuant to the Design-Build Documents shall be made promptly to avoid unreasonable delay in the Work.

  • Visits and Inspections Permit representatives of the Administrative Agent or any Lender, from time to time upon reasonable prior notice to visit and inspect its properties; inspect and make extracts from its books, records and files, including, but not limited to, management letters prepared by independent accountants; and discuss with its principal officers, and its independent accountants, its business, assets, liabilities, financial condition, results of operations and business prospects.

  • Audits and Inspections At any time during normal business hours and as often as the City may deem necessary, Service Provider shall make available to the City for the City’s examination all of Service Provider’s records and documents with respect to all matters covered by this Agreement and, furthermore, Service Provider will permit the City to audit, examine and make copies, excerpts or transcripts from such records, and to make audits of all contracts, invoices, materials, payrolls, records of personnel, conditions of employment and other data relating to all matters covered by this Agreement.

  • Audit and Inspection 9.1 The Recipient, without charge, will permit any officer or officers of the Commissioner, external auditing bodies (i.

  • RECORDS AND INSPECTIONS Consultant shall maintain full and accurate records with respect to all matters covered under this Agreement for a period of three years after the expiration or termination of this Agreement. City shall have the right to access and examine such records, without charge, during normal business hours. City shall further have the right to audit such records, to make transcripts therefrom and to inspect all program data, documents, proceedings, and activities.

  • Access and Inspection 3.7.1 To allow the Landlord (or any Superior Landlord) their agent or any professional adviser, or contractor authorised by the Landlord or the Landlord’s Agent to enter the Property with or without workmen and with all necessary equipment. Other than in the case of an Emergency, the Landlord shall give the Tenant not less than 24 hours' written notice. The Tenant is only required to allow such access for the following: • the Tenant has not complied with a written notice under the Terms of this Agreement and the Landlord wishes to enter the Property in accordance with these Terms. • the Landlord seeks to carry out work for which the Landlord is responsible • the Landlord wishes to inspect the Property • to enable the Landlord or the Landlord’s Agent to comply with statute • Any gas safety or electrical safety checks • Where the Property shall have working Chimney(s) to permit the Landlord’s contractor to attend and sweep the chimney(s) at least every 12 months or more frequently as reasonably considered necessary whether or not the Tenant shall have used such chimney(s) 3.7.2 At any point in the Tenancy, allow access to the Property to the Landlord’s Agent and any estate or letting agents together with any prospective buyer, mortgagee, their surveyors or future Tenant at all reasonable times during normal working hours of the Landlord’s Agent upon giving 24 hours written notice made by any person who is or is acting on behalf of a prospective purchaser or Tenant of the Property and who is authorised by the Landlord or the Landlord’s Agent to view the Property. 3.7.3 At any point in the Tenancy, permit the Landlord’s Agents or any estate agents’ notices or boards to be affixed to the Property. 3.7.4 Where the Property or any equipment at the Property is covered by a service contract or warranty, where required by the Landlord or Agent, the Tenant will arrange appointments direct with the service contract provider and the Tenant will attend all and any visits required.

  • Maintenance and Inspection Consultant shall maintain complete and accurate records with respect to all costs and expenses incurred under this Agreement. All such records shall be clearly identifiable. Consultant shall allow a representative of City during normal business hours to examine, audit, and make transcripts or copies of such records and any other documents created pursuant to this Agreement. Consultant shall allow inspection of all work, data, documents, proceedings, and activities related to the Agreement for a period of three (3) years from the date of final payment under this Agreement.

  • Records and Inspection The LLC shall maintain at its place of business the Articles of Organization, any amendments thereto, this Agreement, and all other LLC records required to be kept by the Act, and the same shall be subject to inspection and copying at the reasonable request, and the expense, of any Member.

  • Audit and Inspection Rights Alberta Innovates shall be entitled at any time and from time to time during the Term and the Retention Period, upon reasonable prior Notice to the Applicant, to have its authorized agents attend at the Applicant's premises or at the location where the Project is being carried out, to: (a) audit or examine the Records ("Audit"); and/or (b) inspect the premises and assets pertaining to the Project ("Inspection"); to assess whether the Applicant has been and is complying with this Investment Agreement. The costs of any Audit or Inspection shall be paid by Alberta Innovates unless such Audit or Inspection reveals a Default or a failure by the Applicant to maintain proper Records or comply with this Investment Agreement, in which case the costs shall be paid by the Applicant. The Applicant shall provide Alberta Innovates’ authorized agents with all such assistance as may be reasonably required during such Audit or Inspection, Including making and providing Alberta Innovates with copies of any Records as requested by Alberta Innovates. For clarity, such right of Audit and Inspection shall be limited to the purpose of ascertaining whether this Investment Agreement has been complied with, and Alberta Innovates will not have any general right to obtain custody or copies of the records of the Applicant except as contemplated by this Section.

  • TESTING AND INSPECTION 6.1 Pre-Commercial Operation Date Testing and Modifications.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!