Coordination of Design and Construction Contract Documents. 5.5.1 Review model(s), Drawings, Specifications and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.
Coordination of Design and Construction Contract Documents. 5.5.1 Review all Drawings, Specifications, and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.
5.5.2 Consult with Owner and A/E on the selection of materials, equipment, component systems, and types of construction used on the Project. Advise Owner on site use, construction feasibility, availability of labor and materials, procurement time requirements, and construction coordination.
5.5.3 Advise Owner of any error, inconsistency or omission discovered in the Drawings, Specifications, and other Construction Documents.
5.5.4 Advise Owner on reasonable adjustments in the Project scope, quality or other options for keeping the Project cost within the AACC.
5.5.5 Review the Construction Documents for compliance with all applicable laws, rules and regulations, the Contract Documents, and Owner requirements.
Coordination of Design and Construction Contract Documents. (1) Review all plans, specifications, and other design documents during the schematic design phase, design development phase, and construction documents phase, and advise Owner on site use, foundations, systems, materials, equipment, construction feasibility, availability of labor and materials, procurement time requirements, installation and construction, relative costs, and provide recommendations to Owner without assuming Design Consultants’ professional responsibility.
(2) Coordinate the incorporation of the Owner’s Design Requirements and Owner’s Construction Standards and procedures, including, without limitation, all of which are hereby incorporated by reference, into the Construction Contract Documents, and use of the Owner’s format as directed by the Owner.
(3) Assist in development of any Special Conditions of the Construction Contract Documents, which shall be approved in writing by the Owner at Owner’s sole option and discretion.
(4) At specified times required by the Owner, review the drawings and Project Manual as they are being prepared, advise Owner of any error, inconsistency or omission discovered, and recommend alternative solutions whenever the design affects construction feasibility, budget, risks, or schedules (without assuming the Design Consultants’ professional responsibility).
(5) Prepare a constructability review report based on Exhibit E, a copy of which has been provided to Construction Manager at the time or times indicated therein.
(6) Coordinate with the Owner to ensure that the Construction Contract Documents comply with all applicable State of Texas and the LSC procurement requirements (without assuming any of the Owner’s responsibility therefore).
(7) Consult with Owner and Design Consultant to determine what materials, equipment, component systems, and construction types should be included in the Contract Documents; suggest reasonable adjustments in the scope of the Project; and suggest alternate bids in the Construction Documents to adjust the Construction Cost to the Guaranteed Maximum Price (as defined herein).
Coordination of Design and Construction Contract Documents. 5.1.4.1 Review all Drawings, Specifications, and other Construction Documents as they are developed by the Project Architect during the schematic design, design development, and construction document design stages of the Project.
5.1.4.2 Consult with Owner and Project Architect on the selection of materials, equipment, component systems, and types of construction used on the Project. Advise Owner on site use, construction feasibility, availability of labor and materials, procurement time requirements, and construction coordination.
5.1.4.3 Advise Owner of any error, inconsistency or omission discovered in the Drawings, Specifications, and other Construction Documents.
5.1.4.4 Advise Owner on reasonable adjustments in the Project scope, quality or other options for keeping the Project cost within the CCL.
5.1.4.5 Review the Construction Documents for compliance with all applicable laws, rules and regulations and with University of Texas System requirements.
Coordination of Design and Construction Contract Documents. 6.5.1 Construction Manager will review all Drawings, Specifications, and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.
6.5.2 Construction Manager will consult with Owner and A/E on the selection of materials, equipment, component systems, and types of construction used on the Project. Advise Owner on site use, construction feasibility, availability of labor and materials, procurement time requirements, and construction coordination.
6.5.3 A Construction Manager will advise Owner of any error, inconsistency, or omission discovered in the Drawings, Specifications, and other Construction Documents.
6.5.4 Construction Manager will advise Owner on reasonable adjustments in the Project scope, quality, or other options for keeping the Project cost within the CCL.
6.5.5 Construction Manager will review the Construction Documents for compliance with all applicable laws, statutes, rules, and regulations, and lawful orders of public authorities applicable to its performance under this Contract.
Coordination of Design and Construction Contract Documents. (1) Review for regulatory compliance, constructability, and functionality, all as related to the Work, of all plans, specifications, and other design documents during the Design Review Phase and advise the Project Manager on site use, foundations, systems, materials, equipment, construction feasibility, availability of labor and materials, procurement time requirements, installation and construction, relative costs, and provide recommendations to City without assuming Design Consultants’ professional responsibility (“Design Review Phase”).
(2) Assist in development of any Special Conditions of the Construction Contract Documents, which shall be approved in writing by mutual agreement between the XXXX and the City Engineer at City Engineer’s sole option and discretion.
(3) At specified times required by the Project Manager, review the Drawings and Specifications (including the entire Project Manual containing the Specifications) as they are being prepared, advise Project Manager of any error, inconsistency omission, or other defect discovered, and recommend alternative solutions, including Value Engineering whenever the design affects construction feasibility, budget, risks, or schedules (without assuming the Design Consultants’ professional responsibility).
(4) Prepare a constructability review report.
(5) Coordinate with the Project Manager to ensure that the Drawings and Specifications and other Contract Documents comply with all applicable State of Texas and City procurement requirements and other Applicable Laws.
(6) Consult with Project Manager and Design Consultant to recommend what materials, equipment, component systems, and construction types should be included in the Contract Documents; suggest reasonable adjustments in the scope of the Project; and suggest alternates to include in bids in the Construction Documents to keep the City’s construction budget within the Guaranteed Maximum Price for the Construction Phase and the limit of the Appropriated Funds.
Coordination of Design and Construction Contract Documents. 5.1.4.1 The Design/Build Contractor shall review all drawings, specifications, and other Construction Documents as they are developed by the Project Architect/Engineer during the Schematic Design, Design Development, and Construction Document design stages of the Project.
5.1.4.2 The Design/Build Contractor shall consult with Owner and Project Architect/Engineer on the selection of materials, equipment, component systems, and types of construction used on the Project. Advise Owner on site use, construction feasibility, availability of labor and materials, procurement time requirements, and construction coordination.
5.1.4.3 The Design/Build Contractor shall advise Owner of any error, inconsistency or omission discovered in the drawings, specifications, and other Contract Documents.
5.1.4.4 The Design/Build Contractor shall advise Owner on reasonable adjustments in the Project scope, quality or other options for keeping the Project cost within the CCL.
5.1.4.5 The Design/Build Contractor shall review the Construction Documents for compliance with all applicable laws, rules and regulations and with The Texas State University System requirements, including the Owner’s Design Requirements as they may have been revised during design.
Coordination of Design and Construction Contract Documents. 8.5.1 Review all Drawings, Specifications, and other Construction Documents as they are developed by the Project Architect during the schematic design, design development, and construction documents design phases of the Project.
8.5.2 Coordinate with the Project Team regarding the selection of materials, equipment, component systems, and types of construction to be used for the Project. Provide input and recommendations to the Project Team regarding proposed site layout, construction feasibility, availability of labor and materials, procurement time requirements, and construction sequencing.
8.5.3 Advise Owner of any error, inconsistency or omission discovered in the Drawings, Specifications, and other Construction Documents.
8.5.4 Advise Owner regarding recommended adjustments to the Project scope, systems or other options for keeping the Project cost within the adopted Budget.
8.5.5 Review the Construction Documents for compliance with all applicable laws, rules and regulations and with Owner requirements.
Coordination of Design and Construction Contract Documents. (1) Review all plans, specifications, and other design documents during the Design Review Phase and advise the Owner on site use, foundations, systems, materials, equipment, construction feasibility, availability of labor and materials, procurement time requirements, installation and construction, relative costs, and provide recommendations to Owner (“Design Review Phase”).
(2) Coordinate any Design Consultant’s incorporation of the Construction Manager’s accepted recommendations into the Construction Contract Documents, using the Owner’s format, as directed by the Owner.
(3) Assist in development of any Special Conditions of the Construction Contract Documents, which shall be approved in writing by the Owner at Owner's sole option and discretion.
(4) At specified times required by the Owner, review the Drawings and Specifications (including the entire Project Manual containing the Specifications) as they are being prepared, advise Owner of any error, inconsistency omission, or other defect discovered, and recommend alternative solutions, including Value Engineering whenever the design affects construction feasibility, budget, risks, or schedules.
(5) Prepare a constructability review report.
(6) Coordinate with the Owner to ensure that the Drawings and Specifications and other Contract Documents comply with all applicable State of Texas and Owner procurement requirements and other Applicable Laws.
(7) Consult with Owner and any Design Consultant to recommend what materials, equipment, component systems, and construction types should be included in the Contract Documents; suggest reasonable adjustments in the scope of the Project; and suggest alternates to include in bids in the Construction Documents to keep the Owner’s construction budget within the Guaranteed Maximum Price and the limit of the Appropriated Funds.
Coordination of Design and Construction Contract Documents. 5.5.1 Review all Drawings, Specifications, and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.
5.5.2 Consult with City and A/E on the selection of materials, equipment, component systems, and types of construction used on the Project. Advise City on site use, construction feasibility, availability of labor and materials, procurement time requirements, and construction coordination.
5.5.3 Advise City of any error, inconsistency or omission discovered in the Drawings, Specifications, and other Construction Documents.
5.5.4 Advise City on reasonable adjustments in the Project scope, quality, or other options for keeping the Project cost within the AACC.
5.5.5 Review the Construction Documents for compliance with all applicable laws, rules and regulations, the Contract Documents, and City requirements.
