Equipment Mounting Sample Clauses

Equipment Mounting. Project Manager Employees in this grade primarily oversee but can also perform electronic, audiovisual or communications work and have an extensive level of qualifications and/or experience. They give direction and planning to projects of all sizes. They perform, but not limited to, the following tasks – ▪ Large Project Management & Design ▪ Read and Interpret tender documents and specifications ▪ Management and direction of other staff ▪ Staff Training ▪ Advanced Knowledge of all Company operations and goals ▪ Liase with other trades on sites ▪ Extensive System Commissioning ▪ Advanced AV System Programming Skills ▪ Produce, Read & Interpret Block Diagram Drawings ▪ Produce, Read & Interpret Cabling Drawings ▪ Extensive System Fault Finding ▪ Cable Termination ADMINISTRATIVE & OFFICE AREAS The Company may employ staff of varying qualifications and experience. Based on those qualifications and experience they will fall into one of the follow classifications, and pay rates as detailed in Schedule B. Junior Administrator Employees in this grade perform clerical and office tasks and are responsible and accountable for their own work which is performed within established routines, methods and procedures. They are always directly supervised and perform, but not limited to, the following tasks – ▪ Operate telephone systems, fax machines, photocopiers ▪ Day to day mailing/courier requirements ▪ Basic Computer knowledge for data entry or retrieval and general document producing tasks. ▪ Copy type at 25 words per minute with 98% accuracy ▪ Maintain basic records and paper filing systems ▪ Take notes and telephones messages ▪ Knowledge of sectional Company operations and goals ▪ Sort, process and record basic financial documents Administrator Employees in this grade perform clerical and office tasks and are responsible and accountable for their own work which is performed within established routines, methods and procedures. They are able to work with minimal supervision and perform, but not limited to, the following tasks – ▪ Junior Staff Training ▪ Arrange Travel bookings, make appointments, establish phone contact on behalf of senior staff ▪ Developing basic procedures and systems ▪ Basic day to day accounting functions such as timesheet entry and wages payments ▪ Operate telephone systems, fax machines, photocopiers ▪ Day to day mailing/courier requirements ▪ Good Computer knowledge for data entry or retrieval and general document producing tasks, including, word...
Sample 1
AutoNDA by SimpleDocs
Equipment Mounting. No equipment mounted on vehicles or chassis shall, under any circumstances, be welded to the vehicle frame at any point between the front of the front spring hanger and the rear of the rear spring hanger. In addition, all holes for bolting must be drilled and not burned. Further, no holes shall be drilled in top or bottom flange of truck frame unless drilling is confined to the section behind the rearmost attachment of the rear spring hangers or for pre-formed factory-made frame rail bolt holes for subsequent body installation. Welding or torch cutting shall be confined to “boxing” the rear end of truck frame (as required for dump equipment to allow full dumping angle). All such work shall be confined to area behind rear spring hangers. Mounting strip between hoist sub-frame of dump body and chassis frame may have flame cut holes to countersunk rivets on truck frame. Chassis frame rivets shall not be removed or cut flush with frame for any reason. Any mounting of aftermarket bodies or equipment may require special wheelbase and cab/axle dimensions to achieve correct weight distribution. Dimensions will be verified by District, and aftermarket vendor to accommodate intended use of vehicle. All mounting of special after-market equipment shall meet manufacturer’s installation requirements, aftermarket equipment manufacturer’s requirements, and all state and federal standards. • Corrective action or replacement due to damage to the vehicle or chassis from non- standard or negligent mounting of equipment shall be the responsibility of the Contractor. Mounting of aftermarket bodies or equipment to chassis may require special wheelbase and cab to axle dimensions to achieve correct weight distribution. If the Contractor discovers a need to change the ordered vehicle dimensions, the new dimension will be confirmed by District and CPA, and the purchase order adjusted to accommodate the intended use of vehicle. OEM shall be responsible for the vehicle and shall ensure the vehicle conforms to all applicable Motor Vehicle Safety Standards per 49 CFR, Part 567.
Sample 1
Equipment Mounting. The Carrier must comply with mounting requirements of the owner utility for each pole. Equipment may either be mounted on the utility pole or strand mounted at the discretion of the pole owner. For City of Loveland‐owned utility poles, no equipment may be mounted above energized equipment. All communications equipment, including small cell infrastructure, must be mounted in the communications space on the pole and must maintain all clearances in accordance with the NESC and City standards.
Sample 1
Equipment Mounting. The equipment shall be installed at the location specified and in accordance with the manufacturer's recommendations. May 2017 AUTOMATIC COMPOSITE SAMPLERS, C01025C17 VACUUM AND PRESSURE Georgetown Wet Weather Treatment Station 11590 - 9 TYPE AND PRIORITY POLLUTANT SAMPLERS
Sample 1
Equipment Mounting. E. Install and connect precharged refrigerant tubing to component's quick-connect fittings. Install tubing to allow access to unit.
Sample 1

Related to Equipment Mounting

  • Equipment Use Lessee agrees that the Equipment will be operated by competent, qualified personnel in connection with Lessee's business for the purpose for which the Equipment was designed and in accordance with applicable operating instructions, laws, and government regulations, and that Lessee shall use all reasonable precautions to prevent loss or damage to the Equipment from fire and other hazards. Lessee shall procure and maintain in effect all orders, licenses, certificates, permits, approvals, and consents required by federal, state, or local laws or by any governmental body, agency, or authority in connection with the delivery, installation, use, and operation of the Equipment.

  • Equipment Cleaning (a) Areas, known by Forest Service prior to timber sale advertisement, that are infested with invasive species of concern are shown on Sale Area Map. A current list of invasive species of concern and a map showing the extent of known infestations is available at the Forest Supervisor’s Office. For purposes of this provision, “Off-Road Equipment” includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.

  • Cell Phones The College follows the State’s Cell Phone Policy. Employees who receive cell phones from the College shall also abide by this Policy. The College shall provide the Policy to any employee who is given a cell phone. Employees are responsible for the cost of all personal calls. While the College anticipates some incidental personal use of cell phones, it is also expected that such use is infrequent.

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Equipment Procurement If responsibility for construction of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades is to be borne by the Connecting Transmission Owner, then the Connecting Transmission Owner shall commence design of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades and procure necessary equipment as soon as practicable after all of the following conditions are satisfied, unless the Developer and Connecting Transmission Owner otherwise agree in writing:

  • FABRICATION Making up data or results and recording or reporting them.

  • Seat Belt Use The Recipient agrees to implement Executive Order No. 13043, “Increasing Seat Belt Use in the United States,” April 16, 1997, 23 U.S.C. § 402 note, (62 Fed. Reg. 19217), by:

  • Generator Subject to the provisions of this Section 29.36, Tenant shall be entitled to install, operate and maintain a generator and any other equipment related thereto, including, without limitation, a fuel system, wiring and shaft space (“Generator”) next to the Building at Tenant’s sole cost and expense (without paying any additional fee or rental to Landlord for the use thereof). Prior to the installation of the Generator, Tenant shall inspect the proposed location to determine a suitable location for the Generator, and Tenant shall submit written plans and specifications relative to the type, size and proposed location (including any proposed screening) of the Generator to Landlord for its review and written approval. Tenant shall be solely responsible for the cost of acquisition, installation, operation, and maintenance of the Generator; and Tenant shall install, maintain and operate the Generator in accordance with all federal, state, and local laws, statutes, ordinances, rules and regulations, including without limitation, obtaining and maintaining any and all permits, approvals and licenses required to install and operate the Generator by any governmental authority having jurisdiction. Landlord and Tenant agree that, upon the expiration of earlier termination of the Lease Term, Tenant shall not be required to remove the Generator, any associated cabling, wiring and screening or other improvements. Tenant shall not be entitled to grant or assign to any third party (other than a permitted assignee of Tenant’s rights under the Lease or a permitted subtenant relative to the Premises (or a portion thereof)) the right to use the Generator without Landlord’s prior written consent (which consent may be granted or withheld in Landlord’s discretion). Upon reasonable advance notice to Tenant (and provided Landlord reasonably coordinates with Tenant and provides an alternate source of backup generator capacity during said transition), Landlord shall be entitled to cause the Generator to be moved to another location near the Building, at Landlord’s cost and expense. Tenant shall pay all personal property taxes on the Generator. Tenant shall also pay any increases in the real property taxes of the Building due to the installation of the Generator within thirty (30) days of receipt of notice from Landlord which includes proof of such increase in taxes. Tenant’s indemnity obligations under Section 5.4.1.5 of the Lease, relating to the use of Hazardous Materials, shall apply to the use and operation of the Generator. Finally, Tenant’s insurance obligations under Section 10.3 of the Lease shall apply to the Generator.

  • Generating Facility The Interconnection Customer’s device for the production of electricity identified in the Interconnection Request, but shall not include the Interconnection Customer’s Interconnection Facilities.

  • Monitoring Equipment 2.2.1 24-hour TSP air quality monitoring was performed using High Volume Sampler (HVS) located at each designated monitoring station. The HVS meets all the requirements of the Project Specific EM&A Manual. Portable direct reading dust meters were used to carry out the 1-hour TSP monitoring. Brand and model of the equipment is given in Table 2.1.

Time is Money Join Law Insider Premium to draft better contracts faster.