Responsibility of BUILDER. Builder shall be responsible for the storing and handling with reasonable care of Buyer’s Supplies after delivery thereof to the Shipyard, and shall, at its own cost and expense, install them in or on the Vessel, unless otherwise provided herein or agreed by the parties hereto, provided, always, that Builder shall not be responsible for quality, efficiency and/or performance of any of Buyer’s Supplies and for the loss of or damage to Buyer’s Supplies caused without Builder’s wilful misconduct or gross negligence.
Responsibility of BUILDER. The BUILDER shall be responsible for storing and handling with reasonable care of the BUYER’s Supplies after delivery thereof at the Shipyard, and shall, at its own cost and expense, install them in or on the VESSEL, unless otherwise provided herein or agreed by the parties hereto, provided, always, that the BUILDER shall not be responsible for quality, efficiency and/or performance of any of the BUYER’s Supplies. (End of Article)
Responsibility of BUILDER. The BUILDER shall be responsible for storing and handling with reasonable care of the BUYER’s Supplies after delivery thereof at the Shipyard, and shall, at its own cost and expense, install them in or on the DRILLSHIP, unless otherwise provided herein or agreed by the parties hereto, provided, always, that the BUILDER shall not be responsible for quality, efficiency and/or performance of any of the BUYER’s Supplies. It will be the BUILDER’s responsibility to the BUYER to: (i) if applicable, assemble the BUYER’s Supplies; (ii) test the BUYER’s Supplies as necessary or appropriate; (iii) install the BUYER’s Supplies on the DRILLSHIP, in modules, as required, or otherwise as required, and to integrate the BUYER’s Supplies into the overall designed system of the DRILLSHIP. In no event will BUILDER charge any additional cost for any of the above. The BUILDER will perform above works under guidance of BUYER and the Vendors representative when required. Any rework involved due to no fault of the BUILDER shall be to BUYER’s cost and responsibility.
Responsibility of BUILDER. BUILDER shall be responsible for the storing and handling with reasonable care of BUYER’S SUPPLIES after delivery thereof to the SHIPYARD, and shall, at its own cost and expense, install them in or on the DRILLSHIP, unless otherwise provided herein or agreed by the parties hereto, provided, always, that BUILDER shall not be responsible for quality, efficiency and/or performance of any of BUYER’S SUPPLIES and for the loss of or damage to BUYER’S SUPPLIES caused without BUILDER’s wilful misconduct or gross negligence.
Responsibility of BUILDER. The Builder shall be responsible for storing and handling with due diligence the Buyer’s Supplies after delivery thereof at the Builder’s yard. The Builder shall not in any way be responsible for the quality, efficiency and/or performance and/or commissioning and testing of any of the Buyer’s Supplies. In addition, and unless the Builder confirmed in writing the inter-face design prior to the Buyer’s ordering of the relevant Buyer’s Supplies, the Builder shall bear no responsibility or liability for the inter-face design or any part hereof. Title to Buyer’s Supplies shall at all times remain with Buyer.
Responsibility of BUILDER. (a) BUILDER personnel and subcontractors which, in the sole opinion of BUYER, are found to be in violation of the safety policies established by BUILDER or those specially in place during the construction of the DRILLSHIP, may be requested to be removed from the project by the BUYER's Supervisor. BUILDER will immediately take such actions as necessary to comply with BUYER's request.
(b) The BUILDER is to assign a dedicated safety supervisor and a sufficient number of safety inspectors to remain in effect throughout the Contract to monitor employee and subcontractor safety, scaffolding and safety netting, tank entry, work permitting procedures, electrical safety, etc. Upon request by the BUYER, the safety supervisor shall participate in BUYER's daily safety and quality meetings.
(c) The BUILDER shall provide a 24 hour fire-watch at the DRILLSHIP construction site. In addition, at various locations around the site, fire alarm stations will be situated whereby a manual alarm may be sounded and a local emergency response team is notified and activated.
(d) BUILDER shall immediately report to BUYER all incidents and/or accidents involving injury, no matter the level of severity, including first aid, loss of property, no matter the value, as well as any identified hazards and/or near misses occurring. Any and all reports of hazards, accidents, incidents, or near misses will result in the immediate and full ceasing of construction activities in the affected area until such time as adequate precautions have been implemented.
(e) BUILDER hereby agrees that the cranes and other related lifting gear of the DRILLSHIP will not be used by BUILDER during construction, without the prior written approval of BUYER. BUIlDER and BUYER recognize that the lifting gear of the DRILLSHIP will be used to install the BOP stack. Should such approval be given, BUILDER shall make such cranes to normal in functional respect of operation, including, but not limited to the changing of all wires.
(f) It is agreed by BUILDER and BUYER that no more than twenty percent (20%), by number, of all blocks fabricated for construction of the VESSEL will be built outside of BUILDER's own yard. In case more than twenty percent (20%) of all blocks for the VESSEL is required by the BUILDER to be fabricated outside of BUILDER's own yard, then the BUILDER shall obtain the BUYER's prior written consent. Pursuant to the above, the only facilities to be used other than BUILDER's are the Hanae and Sungnae fab...
Responsibility of BUILDER. The BUILDER shall be responsible for storing and handling with reasonable care of the OWNER's Supplies after delivery thereof at the Shipyard, and shall, at its own cost and expense, install them in or on the VESSEL, unless otherwise provided herein or agreed by the parties hereto, provided, always, that the BUILDER shall not be responsible for quality, efficiency and/or performance of any of the OWNER's Supplies (other than to install same in accordance with the manufacturer's specifications and requirements, copies of which have been provided to BUILDER by OWNER). It will be the BUILDER's responsibility at no cost to OWNER to:
(i) assemble the OWNER's Supplies, bulk material and provide modularization and/or engineering, except procurement engineering related to the OWNER's Supplies, at the Shipyard;
(ii) test the OWNER's Supplies as necessary or appropriate;
(iii) construct modules from the OWNER's Supplies as appropriate;
(iv) test and pre-commission the modules containing the OWNER's Supplies and to generally test all of the OWNER's Supplies;
(v) install the OWNER's Supplies on the VESSEL, in modules, as required, or otherwise as required, and to integrate the OWNER's Supplies into the overall designed system of the VESSEL;
(vi) test and pre-commission the integrated modules and systems; and
(vii) complete and test the entire drilling system where practicable (i.e., equipment functional test only, not full operational load test) to insure that it works harmoniously as a part of the drilling process and the VESSEL so as to be able to accomplish its intended purpose. In no event will BUILDER charge any additional cost for any of the above. Pre-commission or pre-commissioning as used in this Contract or the Specifications means the putting into service or the commissioning to be done at the Shipyard prior to delivery and acceptance. Pre-commission or precommissioning does not mean commissioning that occurs elsewhere.
Responsibility of BUILDER. (a) Builder shall be responsible for storing, insuring and handling with reasonable care Buyer’s Supplies after delivery thereof at the Shipyard, and shall, at its own cost and expense, install them in or on the Vessel, unless otherwise provided herein or agreed by the Parties hereto. However, Builder shall not be responsible for the quality, performance or efficiency of any equipment included in Buyer’s supplies and is under no obligation with respect to the guarantee of such equipment against any defects caused by poor quality, performance or efficiency of Buyer’s supplies provided that Builder or its subcontractor install the equipment properly.
(b) Buyer’s Supplies shall be at Builder’s risk from the time of their delivery to the Shipyard until the time of their redelivery to Buyer either as part of the Vessel or otherwise.
Responsibility of BUILDER. MODIFICATIONS, CHANGES AND EXTRAS
Responsibility of BUILDER. Title.............................................. 4. BUYER's Supplies Refundment .......................
