MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Contractors' choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre- assembled materials, tools, or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source. Except as provided in Article 3, Section 3, the on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check- off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is performed off-site except as may be imposed by law.
MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Contractor's choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre- assembled materials or products, tools, or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source; provided, however, that where there is a Schedule “A” that includes a lawful union standards and practices clauses, then such clause as set forth in Schedule “A” agreements will be complied with, unless there is a lawful Agency specification (or specification issued by a Construction Manager which would be lawful if issued by the Agency directly) that would specifically limit or restrict the Contractor’s choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre-assembled materials or products, tools, or other labor-saving devices, and which would prevent compliance with such Schedule “A” clause. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is performed off-site for Program Work.
MATERIALS, METHODS & EQUIPMENT. The Project documents alone shall govern choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre-assembled materials, tool, or other labor- saving devices. Contractors must install or use materials, supplies or equipment pursuant to the Project Documents unless Contractor requests and receives written authorization from the Project Architect. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-out or testing of specialized or unusual equipment or facilities as designated by the Contractor. Notwithstanding the foregoing statements, prefabrication issues relating to work traditionally performed at the job site shall be governed pursuant to the terms of the applicable Schedule A. There shall be no restrictions as to work, which is performed off-site for the Project, except for work done in a fabrication center, tool yard, or batch plant dedicated exclusively to the performance of work on the Project, and located adjacent to the “site of work”.
MATERIALS, METHODS & EQUIPMENT. A. There shall be no limitation or restriction upon the Contractor or sub-contractor's choice of materials, modules, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, prefabricated, pre-finished (except that all rebar for use in cast-in-place, on site construction will be cut and bent in accordance with local industry practices), or pre-assembled materials, tools, or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor or sub-contractor. There shall be no restrictions as to work which is performed off-site for the Project, except that the Contractor and sub-contractors will make reasonable efforts to have pre-assembled duct work produced in shops represented by Sheetmetal Workers Local 38. The Contractor will make reasonable efforts to provide that any equipment or materials under the jurisdiction of the Plumbing and Steamfitting trade shall be accepted and installed by Plumbers, Steamfitters and Apprentices, provided such material or equipment conforms to the National Form of Agreement of the United Association.
B. There shall be no stand-by Trades required for temporary power, light, water, or heat unless requested by the Owner.
C. The Employer shall subcontract for the delivery of redi-mix concrete and asphalt only to companies whose wages and other economic benefits are equivalent to the area standards established by the Union unless said companies are unable or unwilling to supply redi-mix concrete or asphalt to the Employer. D Except to the extent otherwise agreed to by the parties in writing, All electrical and electronic work, including but not limited to, the installation, repair and maintenance of all building wiring systems, telephone, data, fire alarm, signs, TV, security wiring and devises, sound and alarm systems and building automation systems, shall be performed under the Local Agreement of IBEW Local 3.
ARTICLE 7 - WORK STOPPAGES AND LOCKOUTS SECTION 1. NO STRIKES-NO LOCK O...
MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Construction Manager’s choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre-assembled materials or products, tools, or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source; provided, however, that where there is a Schedule “A” that includes lawful union standards and practices clauses, then such clause as set forth in Schedule “A” collective bargaining agreement will be complied with. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is performed off- site for Project Work.
MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Contractor’s choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre-assembled materials, tools or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source. The on-site installation or application of such items shall be performed by the trade having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is not On-Site Project Work.
MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Contractors’ choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished (except that all rebar for use in cast-in-place, on site construction will be cut and bent in accordance with local industry practices), or pre-assembled materials, tools, or other labor- saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is performed off- site for the Project.
MATERIALS, METHODS & EQUIPMENT. There shall be no limitation or restriction upon the Contractor's choice of materials, techniques, methods, technology or design, or regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre- finished or pre-assembled materials, tools or other labor-saving devises. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work pursuant to Collective Bargaining Agreement; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check- off or testing of specialized or unusual equipment or facilities as designated by the Contractor. There shall be no restrictions as to work which is not performed at the Project site, with the exception of pre-tied or welded reinforcing steel.
MATERIALS, METHODS & EQUIPMENT. With respect to work which falls outside the scope of this Agreement, there shall be no limitation or restriction upon the Contractors' choice of materials, techniques, methods, technology or design, or, regardless of source or location, upon the use and installation of equipment, machinery, package units, pre-cast, pre-fabricated, pre-finished, or pre-assembled materials, tools, or other labor-saving devices. Contractors may, without restriction, install or use materials, supplies or equipment regardless of their source, with the exception of pre-tied wire or welded reinforcing steel. The on-site installation or application of such items shall be performed by the craft having jurisdiction over such work pursuant to an applicable Collective Bargaining Agreement; provided, however, it is recognized that other personnel having special qualifications may participate, in a supervisory capacity, in the installation, check-off or testing of specialized or unusual equipment or facilities as designated by the Contractor.
