Provision of Services and Materials Sample Clauses

Provision of Services and Materials. Contractor shall perform the activities and accomplish the tasks and deliver to Customers the deliverables described in the applicable Statement of Work and Specifications (the “Deliverables”), and shall perform the services as set forth in this Contract and the applicable Statement of Work (collectively, the “Services”). Contractor shall ensure it has the personnel, materials, facilities and other resources necessary to perform the Services and deliver the Deliverables in accordance with this Contract, excluding items specified as Customer-Furnished Items (“CFI”) in the applicable Statement of Work.
AutoNDA by SimpleDocs
Provision of Services and Materials. Contractor shall provide Purchaser with the Deliverable Items completed in all respects in accordance with the provisions of this Contract. Without limiting the generality of the foregoing Contractor shall provide the necessary personnel, material, services, and facilities to design, manufacture, test and ship one (1) Satellite, together with all other Deliverable Items referred to in Article 3.1 and listed in Exhibit A, Statement of Work. Contractor shall furnish and perform the Work in accordance with the provisions of this Contract, including the following Exhibits, which are attached hereto and made a part hereof: 2.1.1 Exhibit A, Statement of Work, dated as of EDC. 2.1.2 Exhibit B, Satellite Performance Specification, dated as of EDC. 2.1.3 Exhibit C, Product Assurance Plan, dated as of EDC. 2.1.4 Exhibit D, Satellite Test Plan, dated as of EDC. 2.1.5 Exhibit E, Price and Payment Plan, dated as of EDC. 2.1.6 Exhibit F, Escrow Agreement, dated as of EDC 2.1.7 Exhibit G, [***] 2.1.8 Exhbiit H, [***]
Provision of Services and Materials. Contractor shall provide the necessary qualified personnel, equipment, material, services, facilities and know-how for the baseline program and options (as exercised) to: (i) design, develop, provide, manufacture, transport, assemble, configure, install, test and deliver for MSV’s Acceptance, post-Launch, three (3) L-band Space-Based Networks, comprised of the Space Segment and Ground Segment (except that the SA-SBN Ground Segment is priced as a separate option to the Contract pursuant to Article 2.2.3 and except that Contractor shall not be required to perform any Work in connection with the SA-SBN until such time as there is a SA SBN Full Start pursuant to Article 2.5 below), (ii) configure, integrate and test each Ground Segment, as applicable, with its corresponding Satellite, (iii) design, develop and test a GBBF emulator with each Satellite at the Contractor’s facilities, (iv) design, develop and test a satellite simulator to be used to test the GBBF for combined beam forming and adaptive interference nulling, (v) design, develop and deliver a Dynamic Satellite Simulator (DSS), (vi) design, develop, provide, transport, assemble, configure, install and test network infrastructure, including the design, development, provision, installation and integration of the communications network between and among the Ground Segment components, (vii) procure and negotiate all long-haul interconnection circuit leases and service agreements on behalf of MSV, and provide, as a Deliverable Item, all customer-premises equipment (“CPE”) that is not supplied by the long-haul interconnection circuit service provider and for maintaining such CPE during the Initial Operations Period, except for the South American sites. If MSV exercises its option for the Ground Segment for the South American SBN, then once the South American sites have been selected, Contractor shall provide a proposal to MSV which shall be negotiated as a change to the Contract pursuant to Article 15, Changes, (viii) perform and deliver all improvements to any facilities necessary to properly utilize the Ground Segment components as intended, including providing the antenna foundations, civil works, physical security, fencing and any environmental requirements necessary to meet manufacturer specifications and Exhibit B, Technical Requirements for MSV L-Band Space Based Network, except for the South American sites. If MSV exercises its option for the Ground Segment for the South American SBN, then once the...
Provision of Services and Materials. Contractor shall provide the necessary qualified personnel, material, services, facilities and know-how to: design, manufacture, test, provide Mission Operations Support Services, Launch Support Services, and deliver for Purchaser’s Acceptance (1) S-Band Satellite (in-orbit), with [***], together with all other Deliverable Items referred to in Article 3.1, all in accordance with this Contract, including the following Exhibits (as applicable), which are attached hereto (or incorporated by reference) and made a part hereof: 2.1.1 Exhibit A, Statement of Work, Revision 4 dated November 16, 2007 2.1.2 Exhibit B, Satellite Performance Specification, Revision 6 dated October 18, 2007 2.1.3 Exhibit C, Commercial Programs Product Assurance Plan, Document No. E038152, Revision 6 dated April 5, 2004 2.1.4 Exhibit D, Satellite Program Test Plan, Revision 2 dated November 16, 2007 2.1.5 Exhibit E, TerreStar 2 Satellite Program Payment Plan and Termination Liability Amounts (not including Orbital Performance Incentive Payments), dated November 9, 2007 (“TerreStar 2 Payment Plan and Termination Liability Amounts” or “TerreStar 2 Payment Plan”) 2.1.6 Exhibit F, TerreStar Satellite Orbital Performance Incentives Payment Plan, dated November 16, 2007 2.1.7 Attachments A. Form of Invoice (including the Annex 1 thereto, “Form of Contractor Certificate” and “Schedule 1 to Annex I to Attachment A”) B. Key Personnel
Provision of Services and Materials. Contractor shall provide the necessary personnel, expertise, material, services, and facilities to: design, manufacture, test, and deliver to Purchaser for Acceptance, one (1) SATMEX 8 Satellite together with all other Deliverable Items referred to in Article 3.1, in accordance with the following Exhibits, which are attached hereto and made a part hereof: 2.1.1 Exhibit A — SATMEX 8 Satellite Statement of Work, dated 3/12/ 2010 2.1.2 Exhibit B — SATMEX 8 Satellite Technical Specification, dated 5/7/2010 2.1.3 Exhibit CMission Assurance Plan, Rev. 1, dated 9/22/2006 2.1.4 Exhibit D — SATMEX 8 Satellite Test Plan, dated 5/7/2010 2.1.5 Exhibit E — SATMEX 8 Dynamic Satellite Simulator Specification, dated 3/12/2010 2.1.6 Exhibit F — GCE Upgrade Statement of Work, dated 3/19/2010 2.1.7 Exhibit G — iTACS Technical Requirements Specification, dated 3/12/ 2010 2.1.8 Exhibit H — APS Technical Requirements Specification, dated 2/10/2010 2.1.9 Exhibit I — SATMEX 8 Satellite Ground control Equipment and Software Product Upgrade Assurance Plan, dated 2/10/2010 2.1.10 Exhibit JGround Control Equipment Upgrade Test Plan, dated 2/22/2010 2.1.11 Exhibit K — Ground Control Equipment Upgrade Training Plan and Technical Assistance, dated 3/12/2010
Provision of Services and Materials. Contractor shall provide the necessary personnel, expertise, material, services, and facilities to: design, manufacture, test, and deliver to Purchaser for Acceptance, one (1) SATMEX 8 Satellite together with all other Deliverable Items referred to in Article 3.1, in accordance with the following Exhibits, which are attached hereto and made a part hereof: 2.1.1 Exhibit A — SATMEX 8 Satellite Statement of Work, dated 3/12/ 2010 2.1.2 Exhibit B — SATMEX 8 Satellite Requirements, Rev. 1, dated 2/9/2011 2.1.3 Exhibit CMission Assurance Plan, Rev. 1, dated 2/22/2010 2.1.4 Exhibit D — SATMEX 8 Satellite Test Plan, dated 5/7/2010 2.1.5 Exhibit E — SATMEX 8 Dynamic Satellite Simulator Specification, dated 3/12/2010 2.1.6 Exhibit F — GCE Upgrade Statement of Work , dated 3/19/2010 2.1.7 Exhibit G — iTACS Technical Requirements Specification, dated 3/12/ 2010 2.1.8 Exhibit H — APS Technical Requirements Specification, dated 2/22/2010 2.1.9 Exhibit I — SATMEX 8 Satellite Ground control Equipment and Software Product Upgrade Assurance Plan, dated 2/22/2010 2.1.10 Exhibit JGround Control Equipment Upgrade Test Plan, dated 4/9/2010 2.1.11 Exhibit K — Ground Control Equipment Upgrade Training Plan and Technical Assistance, dated 3/12/2010 Use or disclose of the data contained on this page is subject to the restriction set forth in Article 26 2.1.12 Exhibit L — SATMEX 8 Program Satellite and DSS Training Plan, dated 3/12/2010 Use or disclose of the data contained on this page is subject to the restriction set forth in Article 26
Provision of Services and Materials. Contractor hereby agrees to perform the Work in accordance with this Contract, including the following Exhibits, which are attached hereto and made a part hereof: 2.1.1 Exhibit A, Statement of Work, [*] 2.1.2 Exhibit B, Satellite Performance Specification, [*] 2.1.3 Exhibit C, Product Assurance Program Plan, [*] 2.1.4 Exhibit D, Satellite Test Plan, dated [*] 2.1.5 Exhibit E, Space Segment Performance Specification, dated [*] 2.1.6 Exhibit F, Payment Plan and Termination Liability Amounts, dated [*] 2.1.7 Exhibit G, Space Segment Statement of Work, dated [*] 2.1.8 Exhibit H, Space Segment Test Plan, dated [*] 2.1.9 Exhibit J, ICO DSS SOW and Functional Requirements, dated [*] [*] CONFIDENTIAL TREATMENT REQUESTED BY ICO GLOBAL COMMUNICATIONS (HOLDINGS) LIMITED.
AutoNDA by SimpleDocs
Provision of Services and Materials. Contractor shall design, develop, provide, manufacture, transport, assemble, configure, install and deliver the turn-key S-BSS (in the quantities specified in Exhibit A), the test-bed facilities, simulators and all other related Deliverable Items (as defined in Article 2.A), and shall perform the services set forth in this Contract (“Services”), including any Services not specifically described in this Contract or the attached exhibits that are required or appropriate for the proper performance and provision of the Services and Deliverable Items hereunder (collectively, the Services and the Deliverable Items constitute the “Work”), all in accordance with this Contract, including the following exhibits, which are attached hereto (or incorporated by reference) and made a part hereof: (1) Exhibit A – Statement of Work; (2) Exhibit B – Satellite Base Station Subsystem (S-BSS) Functional Specifications; (3) Exhibit C – Price and Payment Milestone Schedule; (4) Exhibit D – Options;
Provision of Services and Materials. Contractor shall design, develop, provide, manufacture, transport, assemble, configure, install, test and deliver the turn-key S-BSS (in the quantities specified in Exhibit A), the Satellite Chipset Work (in the quantities specified or to be agreed in Exhibit A2), the test-bed facilities, simulators and all other related Deliverable Items (as defined in Article 2.A), and shall perform the services set forth in this Contract (“Services”), including any Sservices not specifically described in this Contract or the attached exhibits that are required or appropriate for the proper performance and provision of the Sservices and Deliverable Items hereunder (collectively, the “Services” and together with the Deliverable Items, constitute the “Work”), all in accordance with this Contract, including the following exhibits, which are attached hereto (or incorporated by reference) and made a part hereof: (1) Exhibit A – S-BSS Statement of Work;
Provision of Services and Materials. Contractor hereby agrees to perform the Work in accordance with this Contract, including the following Exhibits, which are attached hereto and made a part hereof: 2.1.1 Exhibit A, Statement of Work, dated July 25, 2005. 2.1.2 Exhibit B, Satellite Performance Specification, dated July 29, 2005. 2.1.3 Exhibit C, Product Assurance Program Plan, dated April 5, 2004. 2.1.4 Exhibit D, Satellite Test Plan, dated July 27, 2005. 2.1.5 Exhibit E, Space Segment Performance Specification, dated November 17, 2005. 2.1.6 Exhibit F, Payment Plan and Termination Liability Amounts, dated November 18, 2005. 2.1.7 Exhibit G, Space Segment Statement of Work, dated November 23, 2005. 2.1.8 Exhibit H, Space Segment Test Plan, dated November 16, 2005. 2.1.9 Exhibit J, ICO DSS SOW and Functional Requirements, dated September 20, 2005. [*] CONFIDENTIAL TREATMENT REQUESTED BY ICO GLOBAL COMMUNICATIONS (HOLDINGS) LIMITED.
Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!