Development, Planning and Approval 开发 Sample Clauses

Development, Planning and Approval 开发. 策划和认可 If the order placed with the SUPPLIER includes development tasks, the contracting party will set out the requirements in writing, e.g. in the form of a requirements specification. The SUPPLIER undertakes to carry out and document project management activities in the planning phase of products, processes, and other cross-functional tasks. The documentation shall be in the form of quality management plans and/or project management plans. When required by RÖCHLING the SUPPLIER undertakes to apply specific methods, such as, for example, APQP and to apply updates and implement corrective action where needed in a timely manner. These documents shall be sent to RÖCHLING on a regular basis. 如果定点的供应商有项目开发的任务,缔约方需要制定出书面的规格要求,例如应用技术规格的形式。供应商根据技术标准的要求开展不同阶段的项目管理活动,并使之文件化,包含产品规划、工艺规划及其他跨部门的任务。文件形式可以是质量管理计划或者/和项目管理计划。供应商应按照劳士领要求的方式开展质量策划和项目管理工作,例如使用 APQP 并及时对纠正措施执行,跟进和更新状态。这些文件须定期发给劳士领汇报。 Within the contract review, the SUPPLIER shall check for feasibility and all technical documentation such as for instance; specifications, drawings, xxxx of materials, CAD data, packaging requirements, norms, etc.. The SUPPLIER shall promptly inform RÖCHLING of any issues, risks, and improvement possibilities thereby identified. 在合同评审阶段,供应商应确认所有技术资料的可行性,例如:规格、图纸、BOM、CAD 数据、包装要求、标准及法律法规等。如有任何问题、风险和改进的可能,供应商应快速地通知劳士领。 During the development phase, the SUPPLIER shall apply suitable preventive quality planning methods, e.g. feasibility analysis, reliability studies, risk analysis and FMEA. Development of the FMEA is mandatory, with the process to be based on e.g. VDA Volume 4 or AIAG standard (Automotive Core Tools of AIAG – FMEA Handbook). The SUPPLIER shall take experiences from previous/similar projects (processes, process data, feasibility studies etc.) into account. 在开发阶段,供应商应应用合适的预防性质量策划方法,例如,可行性分析,可靠性研究,风险风析和 FMEA。 FMEA 的开发是强制性要求,基于 VDA4或 AIAG 标准(AIAG 汽车行业核心工具-FMEA 手册)。 供应商应考虑以往/类似项目的经验(过程、过程数据、可行性研究等)。 The SUPPLIER shall agree and document the manufacturing and test conditions for prototypes and preproduction parts with RÖCHLING. Preproduction parts must be manufactured under conditions close to those of series production.供应商应同意并记录原型样件和试制样件的制造和实验条件。试制样件必须在接近批量生产条件下生产。 In each design/industrialization phase, parts must be measured according to the valid specification/drawing. The measurement reports have to be submitted to the responsible supplier quality engineer. The number of parts, which have to be measured per build phase is determined with the sourcing decision and point...
AutoNDA by SimpleDocs

Related to Development, Planning and Approval 开发

  • Development cooperation 1. The Parties recognise that development cooperation is a crucial element of their Partnership and an essential factor in the realisation of the objectives of this Agreement as laid down in Article 1. This cooperation can take financial and non-financial forms.

  • Development Plans 4.3.1 For each Licensed Indication and corresponding Licensed Product in the Field, Licensee will prepare and deliver to Licensor a development plan and budget (each a “Development Plan”). The initial Development Plans for each Licensed Indication will be delivered within […***…] after the Grant Date for such Licensed Indication.

  • Project Planning GOVERNMENTAL APPROVALS; ENVIRONMENTAL COMPLIANCE; PUBLIC INFORMATION 30 4.1 Planning and Engineering Activities 30 4.2 Site Conditions 30 4.3 Governmental Approvals 30 4.4 Environmental Compliance 34 4.5 Community Outreach and Public Information 35

  • Synchronization, Commissioning and Commercial Operation 4.1.1 The Power Producer shall give at least thirty (30) days written notice to the SLDC and GUVNL, of the date on which it intends to synchronize the Power Project to the Grid System.

  • Synchronisation Commissioning and Commercial Operation 8.1 The Developer shall provide at least forty (40) days advanced preliminary written notice and at least twenty (20) days advanced final written notice to ESCOM of the date on which it intends to synchronize the Power Project to the Grid System.

  • Procurement Planning Prior to the issuance of any invitations to bid for contracts, the proposed procurement plan for the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Guidelines. Procurement of all goods and works shall be undertaken in accordance with such procurement plan as shall have been approved by the Association, and with the provisions of said paragraph 1.

  • Clinical Trials The studies, tests and preclinical and clinical trials conducted by or on behalf of, or sponsored by, the Company, or in which the Company has participated, that are described in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, or the results of which are referred to in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, were and, if still pending, are being conducted in all material respects in accordance with protocols, procedures and controls pursuant to, where applicable, accepted professional and scientific standards for products or product candidates comparable to those being developed by the Company and all applicable statutes, rules and regulations of the FDA, the EMEA, Health Canada and other comparable drug and medical device (including diagnostic product) regulatory agencies outside of the United States to which they are subject; the descriptions of the results of such studies, tests and trials contained in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus do not contain any misstatement of a material fact or omit a material fact necessary to make such statements not misleading; the Company has no knowledge of any studies, tests or trials not described in the Disclosure Package and the Prospectus the results of which reasonably call into question in any material respect the results of the studies, tests and trials described in the Registration Statement, the Time of Sale Disclosure Package or Prospectus; and the Company has not received any notices or other correspondence from the FDA, EMEA, Health Canada or any other foreign, state or local governmental body exercising comparable authority or any Institutional Review Board or comparable authority requiring or threatening the termination, suspension or material modification of any studies, tests or preclinical or clinical trials conducted by or on behalf of, or sponsored by, the Company or in which the Company has participated, and, to the Company’s knowledge, there are no reasonable grounds for the same. Except as disclosed in the Registration Statement, the Time of Sale Disclosure Package and the Prospectus, there has not been any violation of law or regulation by the Company in its respective product development efforts, submissions or reports to any regulatory authority that could reasonably be expected to require investigation, corrective action or enforcement action.

  • INTERNET PLANNING, ENGINEERING AND OPERATIONS ‌ Job Title: Internet/Web Engineer Job#: 2620 General Characteristics Integrally involved in the development and support of all Internet/Intranet/Extranet sites and supporting systems. Works closely with other IT groups and customers to define the system design and user interface based on customer needs and objectives. Participates in all phases of the development and implementation process, and may act as a project manager on special projects. Ensures the integration of the Web servers and all other supporting systems. Responsible for system tuning, optimization of information/data processing, maintenance and support of the production environment.

  • Project Team Cooperation Partnering 1.1.3 Constitutional Principles Applicable to State Public Works Projects.

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Contract Area, including its abandonment.

Time is Money Join Law Insider Premium to draft better contracts faster.