TRANSIT BUS REQUIREMENTS Sample Clauses

TRANSIT BUS REQUIREMENTS. See Section III.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D Spec for Equipment Provided Optional Equipment Unit Price Additional Wheelchair Restraint System Delete the minimum number of seats required for proper spacing (4 maximum) and price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to includes all belts, floor/ shoulder hardware, and storage container -$760.00 Optional Wheelchair Restraint System For each wheelchair position in the base vehicle, plus additional optional restraint systems, if ordered, install complete "Omni" style floor securements and complete belts kits, equal to Q- Straint Q-10008 or Xxx-Xxx XX000X-0X-XXX. Manufacturer and Model #: Q'STRAINT QRT-360 Q-10008 $175.00 Continuous "L" track Install 5 lanes of continuous L track (4 lanes floor mounts, 1 lane shoulder harness) for a single wheelchair position (48” length each) $250.00 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Facing) When not included in the base vehicle, provide and install one forward facing fold-away flip seat at a wheelchair station area which shall be a Xxxxxxxx model "GO ES" seat or other pre- Compatible Equivalent. Flip seat may be lowered to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats measuring (per passenger) a minimum of 17” in width x 17” in depth x 24” in height as measured from the edge of the cushion. Raising/lowering of the seat shall be accomplished manually and shall include a lock to secure the seat in the raised position. Raised seat plus wheelchair shall not block legal aisle. Integrated 3-point lap and shoulder belts shall be provided at each seating location to accommodate an adult ambulatory passenger and shall be in compliance with FMVSS 210. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. $895.00 Air Conditioning System (Roof Mounted Provide and install same requirements as base vehicle, except air conditioning system condenser shall be a roof mounted unit. $1,050.00 Supplemental ADA Transit Package Provide and install the following items (All items to be in compliance with Americans with Disabilities Act): Front and side electronic destination signs – LED type (14 rows and 72 columns minimum) and ...
Sample 1See All (7)
TRANSIT BUS REQUIREMENTS. The terms and conditions in this Section (i.e., III.2 through III.2.8) shall be considered minimum Transit Bus requirements. Appendix D: Transit Bus Contract Documents, Number 2: Contract Pricelist, includes supplemental required specifications for Transit Buses in each Lot. Transit Buses delivered to an Authorized User in a condition that would be considered unacceptable to a reasonable person may be rejected (see also Appendix B §38 Rejected Product). Items which determine this acceptance level shall include, but not be limited to, the general appearance of the interior and exterior of the Transit Bus for completeness and quality of workmanship, lubrication and fluid levels, with any leaks corrected, mechanical operation of the Transit Bus and all electrical components operational. Equipment specified to be furnished and installed shall conform to the best quality standards known to that particular industry, both product and installation.
Sample 1Sample 2Sample 3See All (5)
TRANSIT BUS REQUIREMENTS. The terms and conditions in this Section (i.e., Section 3.2 through Section 3.2.7) Shall be considered minimum Transit Bus requirements. Attachment 1 - Contract Pricelist, includes supplemental required specifications for Transit Buses in the awarded Lot(s). Transit Buses delivered to an Authorized User in a condition that would be considered unacceptable to a reasonable person May be rejected (see also Appendix B §36, Rejected Product). Items which May be evaluated by the Authorized User to determine this acceptance level Shall include, but not be limited to, the general appearance of the interior and exterior of the Transit Bus for completeness and quality of workmanship, lubrication and fluid levels, with any leaks corrected, mechanical operation of the Transit Bus and all electrical components operational. Equipment specified to be furnished and installed Shall conform to the best quality standards known to that particular industry, both product and installation. 3.2.1 STANDARDS, CODES, RULES, AND REGULATIONS Transit Buses Shall be designed and assembled in accordance with all applicable industry standards, including, but not limited to, those listed below. The Transit Bus Shall comply with all governmental regulations as they apply to the Transit Bus described in the Base Item Specifications and Optional Equipment Specifications including, but not limited to, those listed below. If required by law or regulation, the appropriate decals indicating compliance Shall be affixed to the Transit Bus. A. Transit Buses Shall conform to any and all applicable New York State laws, regulations and directives, including but not limited to, New York Codes, Rules and Regulations (NYCRR), New York State Vehicle and Traffic Law (NYSVTL), and New York State Dept. of Motor Vehicles (NYSDMV). B. Transit Buses Shall comply with all current applicable Federal Motor Vehicle Safety Standards (FMVSS), Federal Motor Carrier Safety Administration (FMCSA), National Highway Traffic and Safety (NHTSA), Environmental Protection Agency (EPA), and Occupational Safety & Health Administration (OSHA) requirements. C. Transit Buses Shall comply with Federal Motor Vehicle Safety Standards (FMVSS) 214 (applicable only to Lots A, B, C, and F), FMVSS 220 (applicable to Xxxx X, X, X, X, X, X, X, X, X, and M), Part 38 of the American’s with Disabilities Act (ADA), and NYS DOT regulations outlined under NYCRR Chapter VI, Article 3, Part 720-721 or any amendments thereto, except as relating to sc...
Sample 1Sample 2Sample 3
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D Spec for Equipment Provided Optional Equipment Unit Price Additional Wheelchair Restraint System Price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to include all belts, floor/ shoulder hardware, and storage container. Q-1007 / QS00073 $606.23 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Provide and install one forward facing fold-away flip seat to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats. SA0001 / Go ES Flip $915.53 Camera Security System- 6 monitor Provide and install a complete camera recording system, including software kit. Components include an 8-channel DVR capable of vertical or horizontal installation, plus simultaneous video recording for all camera heads. DVR shall be "user" programmable to record a minimum of 5 vehicle functions (signals) such as brake lights, turn signal, wheelchair lift, etc. A driver trip feature shall also be included. Camera heads to include a minimum of 2 exterior heads @ 600 TV lines resolution, with infrared feature and no audio, plus 4 interior camera heads @ 600 TV lines resolution, with infrared and audio. Install kit shall be universal for 1 or more vehicles with matching camera system. Minimum components include software, mouse, 5-6" monitor, HDD USB docking station, HDD adapter, and BNC F-RCA adapter. A compatible system is acceptable provided all functionality is maintained. Manufacturer and Model # ofDVR: Mobile Video Systems SSD8-3G Live $1,804.25 Manufacturer and Model # ofinterior camera head: MVC 500 Manufacturer and Model # of exterior camera head: MVC 000 XXX
Sample 1
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column D
Sample 1
TRANSIT BUS REQUIREMENTS. See Section III.1.2 Optional Equipment Unit Price for pricing information relative to Optional Equipment. Optional Equipment Specification Information provided in Column C Spec for Equipment Provided Optional Equipment Unit Price Diesel Engine and Fuel Tank(s) Minimum 6.7 liter, 8 cylinder power stroke diesel engine rated minimum 300 HP x 600 lb. ft. torque. Nominal (plus or minus 5 gallons) 40-gallon single or dual fuel tank(s) with 10 gallon (plus or minus 2 gallon) DEF tank. Minimum 200 amp OEM alternator. Number of Cylinders: 6 $6,558.50 Liters: 6.7 Horsepower and Torque: 300 HP / 660 TQ LPG Engine and Fuel Tank(s) Minimum 6.8L V10 gasoline engine rated minimum 300 HP x 425 lb. ft. torque. Add a gaseous prep package (hardened exhaust valves) and install a Propane Autogas conversion for dedicated LPG fuel. Fuel tanks shall provide a minimum 65 GGE (Gallon Gas Equivalent) useable. Compliant with SAE J2343 and NFPA 52. Number of Cylinders: 6.8 $22,172.78 Liters: 10 Horsepower and Torque: 362 HP/ 457 TQ Additional Wheelchair Restraint System Delete seats (4 maximum) and price one (1) additional wheelchair station above the quantity required in the base vehicle. Price is per position to includes all belts, floor/ shoulder hardware, and storage container $1,109.90 Optional Wheelchair Restraint System For each wheelchair position in the base vehicle, plus additional optional restraint systems, if ordered, install complete "Omni" style floor securements and complete belts kits, equal to Q- Straint Q-10008 or Xxx-Xxx XX000X-0X-XXX. Manufacturer and Model #: Q'STRAINT QRT-360 Q-10008 $30.27 Continuous "L" track Install 5 lanes of continuous L track (4 lanes floor mounts, 1 lane shoulder harness) for a single wheelchair position (48” length each) $252.25 Additional Seat (3-Step Fold Away; Feather Weight; and Forward Facing) When not included in the base vehicle, provide and install one forward facing fold-away flip seat at a wheelchair station area which shall be a Xxxxxxxx model "GO ES" seat or other pre- Compatible Equivalent. Flip seat may be lowered to accommodate two (2) ambulatory passengers, when not in use as a wheelchair station. Seat shall be of the same type (including grab handles) and color as standard seats measuring (per passenger) a minimum of 17” in width x 17” in depth x 24” in height as measured from the edge of the cushion. Raising/lowering of the seat shall be accomplished manually and shall include a lock to secure the seat in the raised pos...
Sample 1
AutoNDA by SimpleDocs

Related to TRANSIT BUS REQUIREMENTS

  • Access Requirements You will be responsible for providing the System to enable you to use an Electronic Service.

  • E-Verify Requirements To the extent applicable under ARIZ. REV. STAT. § 41- 4401, the Contractor and its subcontractors warrant compliance with all federal immigration laws and regulations that relate to their employees and their compliance with the E-verify requirements under ARIZ. REV. STAT. § 23-214(A). Contractor’s or its subcontractor’s failure to comply with such warranty shall be deemed a material breach of this Agreement and may result in the termination of this Agreement by the City.

  • Personnel Requirements a. The CONTRACTOR shall secure, at the CONTRACTOR'S own expense, all personnel required to perform this Contract. b. The CONTRACTOR shall ensure that the CONTRACTOR'S employees or agents are experienced and fully qualified to engage in the activities and perform the services required under this Contract, and that all applicable licensing and operating requirements imposed or required under federal, state, or county law, and all applicable accreditation and other standards of quality generally accepted in the field of the activities of such employees and agents are complied with and satisfied.

  • Training Requirements Grantee shall: A. Authorize and require staff (including volunteers) to attend training, conferences, and meetings as directed by DSHS; B. Appropriately budget funds in order to meet training requirements in a timely manner, and ensure that staff and volunteers are trained as specified in the training requirements listed at xxxxx://xxx.xxxx.xxxxx.xxx/hivstd/training/ and as otherwise specified by DSHS. Grantee shall document that these training requirements are met; and C. Ensure that staff hired for HIV and syphilis testing are trained to perform blood draws within three (3) months of employment.

  • Export Requirements The Program, Documentation and all related technical information or materials are subject to export controls and U.S. Government export regulations. You will comply strictly with all legal requirements established under these controls and will not, in connection with its limited evaluation rights hereunder, export, re-export, divert, transfer or disclose, directly or indirectly the Program, Documentation and any related technical information or materials without the prior approval of the U.S.

  • Specific Requirements compensation insurance with statutory limits required by South Dakota law. Coverage B-Employer’s Liability coverage of not less than $500,000 each accident, $500,000 disease-policy limit, and $500,000 disease-each employee.

  • Basic Requirements To be eligible for PayPal’s Seller Protection program, all of the following basic requirements must be met, as well as any applicable additional requirements: • The primary address for your PayPal account must be in the United States. • The item must be a physical, tangible good that can be shipped, except for items subject to the Intangible Goods Additional Requirements. Transactions involving items that you deliver in person in connection with payment made in your physical store, may also be eligible for PayPal’s Seller Protection program so long as the buyer paid for the transaction in person by using a PayPal goods and services QR code. • You must ship the item to the shipping address on the Transaction Details page in your PayPal account for the transaction. If you originally ship the item to the recipient’s shipping address on the Transaction Details page but the item is later redirected to a different address, you will not be eligible for PayPal’s Seller Protection program. We therefore recommend not using a shipping service that is arranged by the buyer, so that you will be able to provide valid proof of shipping and delivery. • The shipping requirement does not apply to eligible transactions involving items that you deliver in person; provided, however, that you agree to provide us with alternative evidence of delivery or such additional documentation or information relating to the transaction that we may request. • You must respond to PayPal’s requests for documentation and other information in a timely manner as requested in our email correspondence with you or in our correspondence with you through the Resolution Center. If you do not respond to PayPal’s request for documentation and other information in the time requested, you may not be eligible for PayPal’s Seller Protection program. • If the sale involves pre-ordered or made-to-order goods, you must ship within the timeframe you specified in the listing. Otherwise, it is recommended that you ship all items within 7 days after receipt of payment. • You provide us with valid proof of shipment or delivery. • The payment must be marked “eligible” or “partially eligible” in the case of Unauthorized Transaction claims, or “eligible” in the case of Item Not Received claims, for PayPal’s Seller Protection program on the Transaction Details page. • In the case of an Unauthorized Transaction claim, you must provide valid proof of shipment or proof of delivery that demonstrates that the item was shipped or provided to the buyer no later than two days after PayPal notified you of the dispute or reversal. For example, if PayPal notifies you of an Unauthorized Transaction claim on September 1, the valid proof of shipment must indicate that the item was shipped to the buyer no later than September 3 to be eligible for PayPal’s Seller Protection program. PayPal determines, in its sole discretion, whether your claim is eligible for PayPal’s Seller Protection program. PayPal will make a decision, in its sole discretion, based on the eligibility requirements, any information or documentation provided during the resolution process, or any other information PayPal deems relevant and appropriate under the circumstances. To be eligible for PayPal’s Seller Protection program for a buyer’s Item Not Received claim, you must meet both the basic requirements and the additional requirements listed below: • Where a buyer files a chargeback with the issuer for a card-funded transaction, the payment must be marked “eligible” for PayPal’s Seller Protection on the Transaction Details page. • You must provide proof of delivery as described below.

  • Software Requirements 7 Developer shall prepare the Project Schedule using Oracle’s Primavera P6.

  • Program Requirements The parties shall comply with the Disadvantaged Business Enterprise Program requirements established in 49 CFR Part 26.

  • Functional Requirements Applications must implement controls that protect against known vulnerabilities and threats, including Open Web Application Security Project (OWASP) Top 10 Risks and denial of service (DDOS) attacks.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!