Non-Warranty Repairs. The Contractor must continue to honor the repair pricing of the Contract under which the hearing aid was sold for the life of the hearing aid or at least 5 years, whether the hearing aid has been discontinued from the contract, the contractor has terminated their participation in the contract, or the contract has been cancelled or expired. An invoice must accompany the repaired hearing aid when returned to an enrolled audiologist or hearing instrument dispenser from the Contractor unless otherwise directed by the participating state. The invoice repair price must be the same as the Contract repair price. If persistent repairs are required due to equipment failure or required parts become unavailable to operate the hearing aid, the Contractor will replace the hearing aid with a new model equal to or better than the failed unit. The replacement equipment must include a full warranty from the date of receipt by the audiologist or hearing instrument dispenser. The Contractor will be responsible for all shipping costs on non-warranty equipment repairs. The Contractor must provide a minimum warranty period of six months on all non-warranty hearing aid repairs.
Non-Warranty Repairs. If a product fails outside the manufacturer’s warranty, Xxxxxxx Communications, will provide information for the closest manufacturer’s warranty center. If preferred, the customer may send the product to Xxxxxxx Communications service center in Phoenix, AZ.
Non-Warranty Repairs. The Contract Vendor must continue to honor the repair pricing of the Contract under which the hearing aid was sold for the life of the hearing aid, whether the hearing aid has been discontinued from the contract, the contract vendor has terminated their participation in the contract, or the contract has been cancelled or expired. An invoice must accompany the repaired hearing aid when returned to an enrolled audiologist or hearing instrument dispenser from the Contract Vendor unless otherwise directed by the participating state. The invoice repair price must be the same as the Contract repair price. INVOICES. The Contract price must be the invoiced price. The invoice must accompany each shipment unless otherwise directed by the participating state.
Non-Warranty Repairs. Upon issuance by the Client of a purchase order including return shipping costs, all work performed on Hardware outside the Warranty provisions of this Agreement shall be done on a time and materials basis, with the hourly rate for non-Warranty repairs to be $150.00. Notwithstanding the foregoing, Hardware sent in for repair for which no problem was found shall be charged at a rate of $150.00. Retail price will be charged for any Hardware replaced that is not covered under standard Warranty terms. Pedigree may, in its sole discretion, replace defective Hardware with new or used comparable Hardware manufactured by the same or other manufacturers.
Non-Warranty Repairs. If a problem is found which is deemed to be a non-warranty item, or if the Product is not covered by the Limited Warranty, BIT shall have the right to perform repairs on a time and materials basis after discussion and agreement with Client. Diagnostic evaluation shall be done by a qualified technician at BIT’s standard technician billing rates as listed in Schedule 1. In certain cases, engineering assistance may be required for diagnosis, which is billed at the applicable rates, as listed in Schedule 1. Prior to performing Manufacturing Agreement – No. 20312 Issue A January 2nd, 2014 [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. any non-warranty repair work, BIT shall provide Client with an estimate of non-warranty servicing costs and obtain explicit approval from Client before proceeding with the repair. Repairs shall be done by a qualified technician, or, where possible, by an assembly technician at a lower service rate. If materials need to be procured from approved supplier, who requires a set-up fee, Client shall be notified by BIT and given the option of ordering additional material under the same set-up fee. Any such set-up fee shall be billed to Client at [***].
Non-Warranty Repairs. If requested by a Purchaser, Seller shall repair or replace defective or damaged Equipment (or modules, cards or components in the case of defective or damaged modules, cards or components) not under warranty at commercially reasonable charges that are reflective of charges made within the industry for the provision of comparable services; provided, however, that such Equipment, module, card or component is in a condition reasonably capable of repair (e.g., not disassembled or otherwise destroyed beyond reasonable repair).
Non-Warranty Repairs. In the event Comverge requires Telco to repair defective Products that do not qualify as warranty repairs, Telco agrees to make all reasonable efforts to analyze and/or repair such Products to meet all applicable specifications. For such analysis and repair, Telco shall be entitled to charge a reasonable fee per individual Product. In such cases where Products are determined by Telco to be non repairable, Telco shall contact Comverge for appropriate disposition of affected Products. All charges for non-warranty repairs except for ECN-related repairs, which are covered in Section 10 herein, shall be clearly identified as such and shall be documented by Part Number and serial number on a special monthly summary invoice.
Non-Warranty Repairs. When non-warranty repairs, such as damage, are requested, contact Symetrica and an RMA Number will be issued to the Customer. The customer is responsible for all shipping associated with non-warranty repairs. Upon receipt of the equipment, an evaluation will be performed and a Repair Estimate will be forwarded to the Customer for Review/Approval. Prior to non-warranty repair work being initiated, a Purchase Order or other means of payment will need to be provided by the Customer. The limited warranty on non-warranty repairs for labor and parts is ninety (90) days. The parties expressly agree that the United Nations Convention on Contracts for the International Sale of Goods (or its successor) shall not apply to this Warranty.
Non-Warranty Repairs. During the Coverage Term, Customers returning Equipment with damage that is not covered under this warranty will be contacted by BI for authorization to repair the Equipment. Such repairs are subject to BI's standard non-warranty repair rates in effect at the time of the repair. Customers shall be subject to a minimum service charge of $50.00 for all such returns, even if no repair is authorized. In the event BI is unable to obtain authorization to repair non-warranty damage within seventy-five (75) days from the date of a unit’s receipt by BI, the unit will be returned and Customer will be subject to the minimum service charge of $50.00. SOFTWARE LICENSE
1. Use - During the License Term, BI grants Customer a personal, limited and non-exclusive license, with no right to sublicense, to use the Software. BI reserves the right to limit the use of the Software to a specific computer designated by product, model and serial number. Unless otherwise specified on or within the Software or its container(s), Customer may not, except for archive purposes: (i) distribute, sublicense or copy any portion of the Software, (ii) modify, decompile, disassemble, decrypt, extract or otherwise reverse engineer the Software, (iii) transfer the Software and license to another party, (iv) prepare derivative works from the Software, (v) transmit the Software electronically by any means, or (vi) use the Software in multiple computer or multiple user arrangements unless that use is covered by individual license for each computer or user. Other rights, restrictions or declarations pertaining to the Software may be specified on or within Software Products or their container(s).
2. General - Customer agrees that the Software belongs to BI or BI's suppliers and it shall keep confidential and use its best efforts to prevent and protect the contents of the Software and any manuals for the Software from unauthorized disclosure or use. Customer's license(s) terminates for the Software, (i) upon Customer's termination of an Equipment Schedule which includes the Software, (ii) if when the Software is furnished for use on specified equipment, then when Customer no longer has possession of that equipment; or (iii) if Customer fails to comply with the license terms and conditions. Upon termination of the license, Customer agrees to either (i) promptly and without demand return the Software to BI, or (ii) destroy any and all copies of the Software.
3. Limitation of Liability - IN NO EVENT WILL BI...
Non-Warranty Repairs. Identify to Consumer any Non-Warranty Repairs. This may include providing to the Consumer a quotation for performance of such repairs by Installer (if applicable and appropriate in the circumstances), or advice as to the type of repairs necessary, the likely cost to the Consumer, and possible service providers. Prior to performing Non-Warranty Repairs, obtain written consent (in accordance with Applicable Law) from the Consumer as to the scope of work and associated cost to the Consumer. Installer is solely responsible for collecting any payments from the applicable Consumer for any Non-Warranty Repairs.
