Authorization Framework Sample Clauses

Authorization Framework. In general, the power generation facilities using RES as well as any other works appurtenant to their construction and operation, including the access roads and the connection lines to the System or the Network shall be allowed to be installed and operate on a lot or an area whereon the applicant has the right of lawful use. For installations less than, or equal to 10 KWpeak that are going to be implemented into building facilities that have residential or commercial use of very small enterprises (enterprises with less than ten (10) employees) the following are in force:  The existence of a legal and operational electricity connection that belongs to the owner of the building facility is obligatory.  Part of the thermal load for hot water has to be provided from another renewable energy source, i.e. use of thermal collector.  Declaration from a certified engineer regarding the installation process and the characteristics of the PV system is required.  A grid connection contract between the owner of the system and the local Network Distribution Manager, namely the DEDDIE S.A., is established.  A sale contract between the owner of the system and the Electricity Provider, namely the Public Power Corporation (PPC), determines the constant price that the owner of the installation receives for every KWhe. The difference between the energy used from the owner and the produced energy from the installation, namely the excess of energy, is the energy that is going to be paid. This contract is valid for 25 years.  The owner is forbidden to proceed in any change to the installed capacity or to the components of the system for as long as the contract is valid. Only maintenance or repair labor is allowed. For installations above 10 KWpeak and less than, or equal to 100 KWpeak all the above mentioned are being in force and especially:  A grid connection contract between the owner of the system and the local Network Distribution Manager, namely the DEDDIE S.A., is established.  A sale contract between the owner of the system and the Electricity Provider, namely the Public Power Corporation (PPC), determines the constant price that the owner of the installation receives for every KWhe. The difference between the energy used from the owner and the produced energy from the installation, namely the excess of energy, is the energy that is going to be paid. This contract is valid for 25 years. For installations above 100 KWpeak and less than, or equal to 1 MWpeak all th...
Sample 1
AutoNDA by SimpleDocs
Authorization Framework. In Spain, PV is mentioned in the Building Code Basic Document DB HE, chapter 5 (xxxx://xxx.xxxxxxxxxxxxx.xxx/cte/export/sites/default/web/galerias/archivos/documentosCTE/DB_ HE/DBHE-2013-11-08.pdf). Anyway the document is more related to where these PV systems are ‘mandatory” (if it can propose other renewable alternative it is ok) depending on type of building (Commercial, Public residential, administrative, industrial, etc) and its size (floor area m2). Indeed the document also specify:  Capacity of the installation depending on the climatic area in Spain.  Power loss limitation because of bad orientation or tilt and shadows from other buildings. BIPV is not considered as glazing in the law, in the sense that if the PV module is not part of the building envelope it should be designed (the panel and the structure) to support the action of exterior ambient agents such as wind, snow, rain and hail. In case it’s part of the building envelope (integration) it should also comply with airtightness, water tightness, fire protection, etc., the same as any other façade module.
Sample 1
Authorization Framework. Several interaction scenarios exist in Internet of Vehicles which makes it hard to comprehend different access control decision and enforcement points, together with other security requirements. Based on the extended ACO architecture, we have put together various vehicular IoT communications into three categories: Object Level, Virtual Object Level and Cloud Services Level [25]. Vehicular IoT mainly has two data exchange scenarios: static and dynamic, where static considers interaction due to long lasting relation for example, vehicle and owner or car manufacturer. Figure 7: Connected Cars and Internet of Vehicles Ecosystem
Sample 1
Authorization Framework. The following information is the result of an inquiry submitted to CSTB (Centre Scientifique et Technique du Bâtiment) in France pertaining to the requirements, which are set on PV-façades. Furthermore, information about a possible certifications and permissions is provided.
Sample 1
Authorization Framework. Legislative Decree No 112/1998 made the regions responsible for the administrative duties relating to energy - including renewable sources, electricity, oil and gas – which were not reserved for the State or assigned to local authorities. Constitutional Law No 3/2001 altered the division of responsibilities between the State and the regions. As a result, within the renewable energy sector, the State has legislative power whilst the regions have administrative power. Under the new system, matters relating to ‘production, transportation and national distribution of energy” are assigned to the concurrent legislation of the State and the regions. It therefore falls to the State to establish, through its own laws, the fundamental principles for each subject, and to the regions to exercise their legislative power within the limits of the fundamental principles expressly set out by the State. There is a great deal of overlap and interaction between spatial planning and planning in this sector (for energy use, waste, land reclamation, transport, water, etc.), and this can be particularly complex. Law No 10/1991 ‘Regulations for the implementation of the National Energy Plan in matters of rational energy use, energy saving and development of renewable energy sources” introduced the Regional Energy Plan to the planning context. Using this measure, regions are planning their interventions in the energy field, governing the actions of local authorities and harmonizing the decisions taken at the various levels of spatial planning. The Energy Plan contains the starting points, short-, medium- and long-term strategic objectives, practical instructions, tools available, legislative and regulatory reference frameworks, funding opportunities, constraints, obligations, and rights of economic operators in the sector, of large-scale consumers and of normal users. In short the Energy Plan represents the main reference point for public and private entities intending to take energy- related initiatives within the territory covered by the Plan. The regional energy plans, although based on free entrepreneurial initiative, also aim to give some direction to operations in the sector. Moreover, as well as having environmental implications, energy choices must also be combined with spatial management decisions. It is not by chance that many of the plans are entitled ‘Regional Energy and Environment Plan”. The regulatory references for photovoltaic authorization procedures vary dependin...
Sample 1
Authorization Framework. In Austria exists the ÖNORM, which is in technical terms of use the pendant to the German DIN. Some German norms are already overtaken by the ÖNORM.
Sample 1

Related to Authorization Framework

  • Authorization, Etc This Agreement and the Notes have been duly authorized by all necessary corporate action on the part of the Company, and this Agreement constitutes, and upon execution and delivery thereof each Note will constitute, a legal, valid and binding obligation of the Company enforceable against the Company in accordance with its terms, except as such enforceability may be limited by (i) applicable bankruptcy, insolvency, reorganization, moratorium or other similar laws affecting the enforcement of creditors’ rights generally and (ii) general principles of equity (regardless of whether such enforceability is considered in a proceeding in equity or at law).

  • AUTHORIZATION AND CONSENT The Government has given its authorization and consent for all use and manufacture of any invention described in and covered by a patent of the United States in the performance of this Agreement or any part hereof or any amendment hereto or any subcontract hereunder (including any lower-tier subcontract) which is expected to exceed $100,000.

  • Overtime Authorization All overtime must be authorized by the City Manager or his or her designated representative in advance of being worked.

  • Authorization of Agreement This Agreement has been duly authorized, executed and delivered by the Company.

  • Authorization Holds You do not have the right to stop payment on any purchase transaction originated by use of your Mobile Wallet, other than transactions withing the Mobile Wallet Marketplace that display a cancel transaction button. When you use your Mobile Wallet to pay for goods or services, certain merchants may ask us to authorize the transaction in advance and the merchant may estimate its final value. When you use your Mobile Wallet to obtain cash at an ATM or from a bank teller, we will authorize the transaction in advance (including all applicable fees). When we authorize a purchase transaction, we commit to make the requested funds available when the transaction finally settles, and the Bank will place a temporary hold on your Mobile Wallet’s funds for the amount indicated by the merchant. If you authorize a transaction and then fail to make a purchase of that item as planned, the approval may result in a hold for that amount of funds. Car rentals, hotels and other service-oriented merchants may choose to factor in additional amounts upon check-in, and it may take up to sixty (60) days after your stay or your rental to have any excess amounts held by the hotel or rental company added back to your available balance. Similarly, some gas stations may factor in additional amounts to cover potential filling of the tank; if you want to avoid such a hold, you may want to pay inside the gas station, instead of paying at the pump. Until the transaction finally settles, the funds subject to the hold will not be available to you for other purposes. We will only charge your Mobile Wallet for the correct amount of the final transaction, and we will release any excess amount when the transaction finally settles. When you use your Mobile Wallet at certain restaurants and service-oriented merchants, there may be an additional 20% (or more) added to the authorization to cover any tip you may leave on the purchase. If this occurs, and your total bill, after adding in the additional 20% (or more), exceeds the amount available on your Mobile Wallet, your transactions may be declined. Accordingly, you should ensure that your Mobile Wallet has an available balance that is 20% (or more) greater than your total bill before using your Mobile Wallet.

  • ACH Authorization Merchant authorizes Service Provider to initiate debit/credit entries to the Designated Account, the Reserve Account, or any other account maintained by Merchant at any institution, all in accordance with this Agreement. This authorization will remain in effect beyond termination of this Agreement. In the event Merchant changes the Designated Account, this authorization will apply to the new account.

  • Leave Authorization The employee's request and the Co-operative's decision concerning all leaves of absence referred to in this article shall be made in writing.

  • Authorization to Proceed A fully executed and approved authorization in the form of Attachment 6 to this Agreement, Authorization to Proceed (“ATP”) accompanied by an executed purchase order document issued by the Owner to the Project Consultant, authorizing the performance of specific professional services, authorizing commencement of a Phase as defined in Article 2.1 through Article 2.8, and stating the time for completion and the amount of fee authorized for such services.

  • Authorization Warranty Contractor represents and warrants that the person executing this Contract on behalf of and for Contractor is an authorized agent who has actual authority to bind Contractor to each and every term, condition, and obligation of this Contract and that all requirements of Contractor have been fulfilled to provide such actual authority.

  • Licenses and Similar Authorizations The Contractor, at no expense to the City, shall secure and maintain in full force and effect during the term of this Contract all required licenses, permits, and similar legal authorizations, and comply with all related requirements.

Time is Money Join Law Insider Premium to draft better contracts faster.