Conceptual Drawings Sample Clauses

Conceptual Drawings. On or before thirty (30) days after the Effective Date, Developer shall prepare and submit to the City for approval basic concept and design drawings and related documents containing the overall plan for redevelopment of the Site and construction of the Project, which shall be a logical extension of and consistent with the general description set forth on Exhibit B and the Plan of Development (the “Conceptual Drawings”). The Conceptual Drawings shall specifically identify and include in general terms all public improvements to be completed by Developer in connection with the Project, including but not limited to: (i) utility and infrastructure improvements in the public right-of-way, including street and alley improvements;
Sample 1Sample 2
AutoNDA by SimpleDocs
Conceptual Drawings a. Provide a digital copy (.PDF version) of the conceptual drawings. The conceptual drawings shall contain the following sheets:  Cover Sheet – Note the index of Sheets indicating the anticipated drawing sheets shall be provided.  Anticipated traffic control phasing  Property Layout and Land OwnershipPlan and Profile Sheets - Show existing and proposed water and sewer mains and existing services, and existing and proposed storm sewers (City of Rapid City Utility GIS information to be used) for each alignment considered. The utilities should be shown in profile as well. Design Criteria elements like profile grades, “K” values, vertical and horizontal curve data should be included.  Plan sheets shall be prepared utilizing the latest City of Rapid City Drafting Standards. Use current City-provided drawing templates. Drawing size shall be 11” x 17”.  Topographic data to utilize City of Rapid City 2015 LiDAR data.  Water and sewer services to be located and surveyed in the field with verification through Rapid City service cards.
Sample 1
Conceptual Drawings. On or before thirty (30) days after the Effective Date, Developer shall prepare and submit to the City for approval basic concept and design drawings and related documents containing the overall plan for redevelopment of the Property and construction of the Project, which shall be a logical extension of and consistent with the general description set forth on Exhibits B, C and D (the “Conceptual Drawings”). The Developer shall also submit the Conceptual Drawings to the DDA Executive Director. The DDA shall have the right to review and comment on the proposed Conceptual Drawings, provided that the City shall have the sole right to approve or disapprove the Conceptual Drawings. The Conceptual Drawings shall specifically identify and include in general terms all Eligible Improvements to be completed by Developer in connection with the Project, as further set forth on Exhibits B and C hereto.‌ Developer shall conduct at least one (1) public outreach meeting (in addition to any meetings or notices that may be required under the Loveland City Code in connection with the City’s land use and development review process) to make the Conceptual Drawings available for public review and input by the citizens of Loveland. Developer shall make a reasonable record of such input and commentary as may be received and shall consider such input in further design and development activities. The City shall have ten (10) days after receipt of the Conceptual Drawings to review and approve or disapprove by written notice to the Developer building elevations of all portions of the Buildings visible from the public right-of-way, and which Drawings the Parties acknowledge are intended to be consistent with the description of the Project set forth on Exhibits B, C and D. Failure of the City to give such written notice of approval or disapproval within the required period shall be deemed an approval of the Conceptual Drawings for purposes of this Agreement. The Developer acknowledges and agrees that the City has the right to require additional design elements that exceed current standards, provided that any such additional design elements requested by the City shall be subject to review and approval by the Developer and the City for feasibility and cost.
Sample 1
Conceptual Drawings. PMB to provide all available existing conceptual drawings, if any.
Sample 1
Conceptual Drawings. (i) Within three (3) weeks after the execution date of the Lease (the “Plan Submission Date”), Tenant shall submit to Landlord two (2) sets of prints and one (1) set of reproducible prints of Tenant’s design plan for the Premises (scale: 1/8” = 1’ or 1/4” = 1', unless otherwise indicated) (the “Conceptual Drawings”) showing the intended design character and finishing of the Premises. The Conceptual Drawings shall comply with the design criteria of the Shopping Center and shall set forth the requirements of Tenant within the Premises. Such drawings shall include without limitation the following:
Sample 1
Conceptual Drawings. Provide two (2) copies and a PDF version of the conceptual drawings. The conceptual drawings shall contain the following sheets: • Cover Sheet – Note the index of Sheets indicating the anticipated drawing sheets shall be provided. • Survey Control Sheet – The Survey Control sheet shall include control points with Northing, Easting, Elevation, and Description with Station and Offset to the closest alignment. Horizontal alignments including beginning and end stations, and deflections and curve data. Combined ground to grid scale factor and Basis of Bearings. • Anticipated traffic control phasing and erosion control measures. • Property Layout and Land Ownership. #18-2480 – Elk Vale Lift Station Gravity & Force Main Upgrade 10/2/19 Page5 Elk Vale Lift Station Gravity & Force Main Upgrade PROJECT NO. #18-2480 / CIP #50729 • Plan and Profile Sheets - Show existing and proposed utility mains and existing services, storm sewers, driveway locations, fittings, and proposed surfacing and drainage items. The utilities should be shown in profile as well. Design Criteria elements like profile grades, should be included. • Anticipated Rapid City Standard Details. • Special Details - Conceptual layouts for special/critical elements for example, pump facilities, etc. • Plan sheets shall be prepared utilizing the latest City of Rapid City Drafting Standards. Use current City-provided drawing templates.
Sample 1
Conceptual Drawings. The conceptual drawings shall contain the following sheets:  Cover Sheet - Include vicinity map and index of drawings  Survey Control Sheet – The Survey Control sheet shall include control points with Northing, Easting, Elevation, and Description with Station and Offset to the closest alignment. Horizontal alignments including beginning and end stations, and deflections and curve data. Combined ground to grid scale factor and Basis of Bearings.  Property Layout and Land OwnershipPlan and Profile Sheets - Show demolition, existing and proposed utility mains and existing services, proposed structures, proposed pavement repairs, and proposed easements, and other necessary features to convey the intend to the preliminary design.  Grading PlansCross SectionsSpecial Details – Include Conceptual Details for special requirements of project as necessary.  Anticipated sequencing and traffic control phasing Submit three (3) copies and a PDF version of the Preliminary Design Technical Memorandum to City of Rapid City’s project manager for review and comment.
Sample 1
AutoNDA by SimpleDocs

Related to Conceptual Drawings

  • Construction Drawings After approving the Additional Programming Information, Landlord shall cause the Architect and the Engineers to prepare and deliver to Tenant Construction Drawings that conform to the approved Space Plan and the approved Additional Programming Information. Such preparation and delivery shall occur within 15 business days after the later of Landlord’s approval of the Additional Programming Information or the mutual execution and delivery of this Agreement. Tenant shall approve or disapprove the Construction Drawings by notice to Landlord. If Tenant disapproves the Construction Drawings, Tenant’s notice of disapproval shall specify any revisions Tenant desires in the Construction Drawings. After receiving such notice of disapproval, Landlord shall cause the Architect and/or the Engineers to revise the Construction Drawings, taking into account the reasons for Tenant’s disapproval (provided, however, that Landlord shall not be required to cause the Architect or the Engineers to make any revision to the Construction Drawings that is inconsistent with the Landlord Requirements or that Landlord otherwise reasonably disapproves), and resubmit the Construction Drawings to Tenant for its approval. Such revision and resubmission shall occur within five (5) business days after the later of Landlord’s receipt of Tenant’s notice of disapproval or the mutual execution and delivery of this Agreement if such revision is not material, and within such longer period of time as may be reasonably necessary (but not more than 15 business days after the later of such receipt or such mutual execution and delivery) if such revision is material. Such procedure shall be repeated as necessary until Tenant has approved the Construction Drawings. The Construction Drawings approved by Landlord and Tenant are referred to in this Work Letter as the “Approved Construction Drawings”.

  • Working Drawings Not later than 15 business days following the approval of the TI Design Drawings by Landlord, Tenant shall cause the TI Architect to prepare and deliver to Landlord for review and comment construction plans, specifications and drawings for the Tenant Improvements (“TI Construction Drawings”), which TI Construction Drawings shall be prepared substantially in accordance with the TI Design Drawings. Tenant shall be solely responsible for ensuring that the TI Construction Drawings reflect Tenant’s requirements for the Tenant Improvements. Landlord shall deliver its written comments on the TI Construction Drawings to Tenant not later than 10 business days after Landlord’s receipt of the same; provided, however, that Landlord may not disapprove any matter that is consistent with the TI Design Drawings. Tenant and the TI Architect shall consider all such comments in good faith and shall, within 10 business days after receipt, notify Landlord how Tenant proposes to respond to such comments. Any disputes in connection with such comments shall be resolved in accordance with Section 2(d) hereof. Provided that the design reflected in the TI Construction Drawings is consistent with the TI Design Drawings, Landlord shall approve the TI Construction Drawings submitted by Tenant. Once approved by Landlord, subject to the provisions of Section 4 below, Tenant shall not materially modify the TI Construction Drawings except as may be reasonably required in connection with the issuance of the TI Permit (as defined in Section 3(a) below).

  • Approved Working Drawings The Final Working Drawings shall be approved by Landlord (the “Approved Working Drawings”) prior to the commencement of construction of the Premises by Tenant. After approval by Landlord of the Final Working Drawings, Tenant may submit the same to the appropriate municipal authorities for all applicable building permits. Tenant hereby agrees that neither Landlord nor Landlord’s consultants shall be responsible for obtaining any building permit or certificate of occupancy for the Premises and that obtaining the same shall be Tenant’s responsibility; provided, however, that Landlord shall cooperate with Tenant in executing permit applications and performing other ministerial acts reasonably necessary to enable Tenant to obtain any such permit or certificate of occupancy. No changes, modifications or alterations in the Approved Working Drawings may be made without the prior written consent of Landlord, which consent may not be unreasonably withheld.

  • Final Working Drawings After the Final Space Plan has been approved by Landlord, Tenant shall supply the Engineers with a complete listing of standard and non-standard equipment and specifications, including, without limitation, Title 24 calculations, electrical requirements and special electrical receptacle requirements for the Premises, to enable the Engineers and the Architect to complete the “Final Working Drawings” (as that term is defined below) in the manner as set forth below. Upon the approval of the Final Space Plan by Landlord and Tenant, Tenant shall promptly cause the Architect and the Engineers to complete the architectural and engineering drawings for the Premises, and Architect shall compile a fully coordinated set of architectural, structural, mechanical, electrical and plumbing working drawings in a form which is sufficiently complete to allow all of Tenant’s Agents to bid on the work and to obtain all applicable permits (collectively, the ‘‘Final Working Drawings”) and shall submit the same to Landlord for Landlord’s approval, which shall not be unreasonably withheld, conditioned, or delayed. Tenant shall supply Landlord with four (4) copies signed by Tenant of such Final Working Drawings, Landlord shall not unreasonably withhold, condition, or delay its approval of the Final Working Drawings. Landlord shall approve or reasonably EXHIBIT A disapprove of the Final Working Drawings within ten (10) business days after Landlord’s receipt thereof. If Landlord reasonably withholds its approval, Landlord shall provide Tenant with the specific reasons therefor.

  • Non-Extension Drawings If the Liquidity Facility is scheduled to expire on a date (the “Stated Expiration Date”) prior to the date that is 15 days after the Final Maturity Date with respect to the ACS Group Loans, then, no earlier than the 60th day and no later than the 30th day prior to the applicable Stated Expiration Date then in effect, the Administrative Agent shall request that the Liquidity Facility Provider extend the Stated Expiration Date until the earlier of (i) the date which is 15 days after the Final Maturity Date with respect to the ACS Group Loans and (ii) the date that is immediately preceding the 364th day occurring after the Stated Expiration Date then in effect (unless the obligations of the Liquidity Facility Provider under the Liquidity Facility are earlier terminated in accordance with the Liquidity Facility). If on or before the date which is 10 days prior to the Stated Expiration Date, (A) the Liquidity Facility shall not have been replaced in accordance with Section 3.10(d) hereof or (B) the Liquidity Facility Provider fails irrevocably and unconditionally to advise the Administrative Agent that such Stated Expiration Date then in effect shall be so extended (whether or not the Administrative Agent has in fact requested an extension), the Administrative Agent shall immediately, in accordance with the terms of the Liquidity Facility (a “Non-Extended Facility”), request a drawing under such Liquidity Facility (such drawing, a “Non-Extension Drawing”) for the Available Amount thereunder. Amounts drawn pursuant to a Non-Extension Drawing shall be deposited into the Liquidity Facility Reserve Account.

  • Drawings a. Drawings Submitted With Bid When the Bid Specifications require the Bidder to furnish drawings and/or plans, such drawings and/or plans shall conform to the mandates of the Bid

  • Space Plans Prior to drafting any Construction Drawings, Tenant shall furnish Landlord with Tenant's final space plans for the Premises ("Space Plans"). The Space Plans shall show locations of all proposed improvements, including partitions, cabinetry, equipment and fixtures, shall identify materials and finishes by location, and shall specify the location of any proposed structural floor penetrations, the location and extent of floor loading in excess of Building capacity, if any, any special HVAC requirements, the location and description of any special plumbing requirements, and any special electrical requirements. In addition, the Space Plans shall show telephone and telecommunications facilities, and computer and electronic data facilities. Landlord shall approve or disapprove the Space Plans by written notice given to Tenant within ten (10) business days after receipt of the Space Plans. Landlord shall not unreasonably withhold its approval of the Space Plans, provided that, without limiting the generality of the foregoing, Landlord shall be entitled to withhold its consent to the Space Plans if, in Landlord's good faith judgment, any one or more of the following situations exist: (a) the proposed Tenant Improvements will adversely affect the exterior appearance of the Buildings; or (b) the proposed Tenant Improvements may impair the structural strength of the Buildings, adversely affect any Building Systems or materially adversely affect the value of the Buildings; or (c) the specifications for the proposed Tenant Improvements are not consistent with, or would detract from, the character or image of the Project. If Landlord disapproves the Space Plans, Landlord shall return the Space Plans to Tenant with a statement of Landlord's reasons for disapproval, or specifying any required corrections and/or revisions. Landlord shall approve or disapprove of any revisions to the Space Plans by written notice given to Tenant within five (5) business days after receipt of such revisions. This procedure shall be repeated until Landlord approves the Space Plans.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner designated by Tenant and reasonably approved by Landlord (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.2. Tenant shall retain the engineering consultants selected by Tenant (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, life safety, and sprinkler work in the Premises, which work is not part of the Base Building. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease shall specifically apply to the Construction Drawings.

  • Interest Drawings If on any Distribution Date, after giving effect to the subordination provisions of this Agreement, the Subordination Agent shall not have sufficient funds for the payment of any amounts due and owing in respect of accrued interest on the Class A Certificates or the Class B Certificates (at the Stated Interest Rate for such Class of Certificates) (other than any amount of interest which was due and payable on the Class A Certificates or the Class B Certificates on such Distribution Date but which remains unpaid due to the failure of the Depositary to pay any amount of accrued interest on the Deposits on such Distribution Date), then, prior to 12:30 p.m. (New York City time) on such Distribution Date, (i) the Subordination Agent shall request a drawing (each such drawing, an “Interest Drawing”) under the Liquidity Facility with respect to such Class of Certificates in an amount equal to the lesser of (x) an amount sufficient to pay the amount of such accrued interest (at the applicable Stated Interest Rate for such Class of Certificates) and (y) the Available Amount under such Liquidity Facility, and shall pay such amount to the Trustee with respect to such Class of Certificates in payment of such accrued interest.

  • Final Drawing Upon receipt from a Liquidity Provider of a Termination Notice with respect to any Liquidity Facility, the Subordination Agent shall, not later than the date specified in such Termination Notice, in accordance with the terms of such Liquidity Facility, request a drawing under such Liquidity Facility of all available and undrawn amounts thereunder (a “Final Drawing”). Amounts drawn pursuant to a Final Drawing shall be maintained and invested in accordance with Section 3.5(f) hereof.

Time is Money Join Law Insider Premium to draft better contracts faster.