SCHEDULING AND ROTATION Sample Clauses

SCHEDULING AND ROTATION. 10.4.1 Unit Members shall be given first consideration for all intersession assignments in their departments/areas. An occasional exception may be granted, with department approval, to encourage an outstanding expert to teach a single course in an area of such person’s expertise. 10.4.2 Intersession assignments shall be rotated on a one-intersession basis among qualified Unit Members in the department/area. In any department/area where a rotational system is not already established, it will commence on the basis of seniority, with the Unit Member having the most seniority being given the first right of class assignment. Subsequent to the first class assignment, no Unit Member shall receive an additional class assignment until the remaining class assignments have been offered to the other members of the department/area in rotation. 10.4.3 The rotational system for intersession assignments shall be separate from rotational systems established for overload and involuntary assignments. 10.4.4 Each year, the Immediate Management Supervisor shall distribute a form on which Unit Members may indicate the assignments they would be interested in assuming as an intersession assignment. Any such forms returned to the Immediate Management Supervisor shall serve as the basis for scheduling intersession assignments. If a Unit Member entitled by rotation to an intersession assignment declines the assignment or fails to respond, the assignment shall be offered to the next Unit Member in the rotation, until the assignment has been filled.
AutoNDA by SimpleDocs
SCHEDULING AND ROTATION. 8.3.1 Each semester/term the Immediate Management Supervisor shall distribute a form on which Unit Members may indicate the assignments they would be interested in assuming as overload. Any such forms returned to the Immediate Management Supervisor shall serve as the basis for scheduling overload assignments for the next semester/term. Unit Members who wish to assume an overload shall notify the Immediate Management Supervisor in a timely manner. 8.3.2 Unit Members shall be given first consideration for all overload assignments in their departments or areas. For purposes of scheduling and rotation, overload assignments within a department or area shall be deemed to exist when the assignments offered within the department or area exceed the assignments necessary to complete the regular contract workloads of the Unit Members qualified for such assignments and regularly assigned within such department or area. Such overload assignments shall be made only after reasonable consideration of qualified Unit Members who have indicated interest in assuming available assignments. 8.3.3 Overload assignments shall be rotated on a one (1) semester basis among qualified Unit Members in the department or area. In any department or area where a rotational system is not already established, it will commence on the basis of seniority. Subsequent to the first assignment, no Unit Member shall receive an additional assignment until the remaining assignments have been offered in rotation. If a Unit Member entitled by rotation declines the assignment or fails to respond, the assignment shall be offered to the next qualified Unit Member in the rotation until the assignment has been filled. 8.3.4 Voluntary assumption of an overload assignment shall not alter the status of a Unit Member with respect to any rotational system established for purposes of scheduling intersession or involuntary assignments. 8.3.5 If a Unit Member is denied an overload assignment, the Immediate Management Supervisor will provide written rationale to the Unit Member before the Unit Member’s schedule is finalized.
SCHEDULING AND ROTATION. A. The Employer shall have the right to freely determine, establish, and modify scheduling and manpower requirements, including, but not limited to, number of shifts, starting and quitting times for each shift, and manpower requirements for each shift, except as expressly limited by this Section. B. “Pass days” shall not be “split” except where, in the judgment of the Sheriff, pass days must be split to maintain police coverage at an acceptable level at certain times, and, insofar as is reasonably practicable, a special conference is called in advance to discuss possible alternatives.
SCHEDULING AND ROTATION. 10.54.1 Unit Members shall be given first consideration for all intersession assignments in their departments/areas. An occasional exception may be granted, with department approval, to encourage an outstanding expert to teach a single course in an area of such person’s expertise. 10.54.2 Each year, the The Immediate Management Supervisor shall distribute a form on which Unit Members may indicate the assignments they would be interested in assuming as an intersession assignment. Any such forms returned to the Immediate Management Supervisor shall serve as the basis for scheduling intersession assignments, subject to Management’s right of assignment. Unit Members shall submit the Request Form to the IMS within seven (7) business days of receipt of the intersession class(es). 10.5.3 If necessary, iIntersession class assignments shall be rotated on a one-intersession basis among qualified Unit Members in the department/area. In any department/area where a rotational system is not already established, it will commence on the basis of seniority, with the Unit Member having the most seniority being given the first right of class assignment. Subsequent to the first class assignment, no Unit Member shall receive an additional class assignment until the remaining class assignments have been offered to the other members of the department/area in rotation.
SCHEDULING AND ROTATION. A. At work locations where there are routine changes in the schedules of days worked, shifts worked and days off, schedules shall be posted at least two weeks in advance of the beginning of the schedule period. B. Where permanent assignments to day, P.M., or night shifts are customary they shall continue. C. Requests by employees for late shift or weekend assignments shall be accommodated to the extent practicable in order to reduce the burden of such assignments on other employees. D. Necessary rotation to late shifts shall be equitably distributed among nurses in a functional unit over each scheduling period. A nurse shall not be assigned to more than two of the three shifts (day, P.M., night) notwithstanding voluntary overtime in any seven (7) day period. E. Weekends off work shall be equitably distributed among nurses in a functional unit over each scheduling period. The parties agree the Employer will attempt to develop schedules that allow nurses to be off every other weekend, where such schedules are practicable and within the operating needs of the agency. This does not imply that existing practice more favorable to nurses (in number of weekends off) are to be disturbed. F. If assignment to a cross shift or odd shift poses significant hardships for an individual Nurse, the Employer and the Association will discuss the problem and attempt to work out ways to avoid the hardship. G. In the event of a day off rotation only, an employee who works more than five (5) days in any given seven (7) day period even though it overlaps work weeks shall be paid inconvenience premium pay of $1.50 per hour above the regular rate of pay on each of those days worked over five (5) days within said seven days within a given seven-day period. Inconvenience premium pay will increase to $2.00 per hour effective July 1, 2005, and to $2.50 per hour effective July 1, 2007. Provided, however, if an employee works more than the normally scheduled hours or days as provided in this Agreement, said employee shall be paid at the normal/usual overtime rate.
SCHEDULING AND ROTATION. (A) There will be one thirty (30) minute lunch break allowed per shift and two (2) 15-minute breaks allowed per shift. (B) The City shall have the right to freely determine, establish and modify scheduling and manpower requirements, including, but not limited to, number of shifts, lunch break procedure, starting and quitting. time for each shift, and manpower requirements for each shift, except as expressly limited by this section. (C) Pass Days" shall not be "split" except where, in the judgment of the Chief, pass days must be split to maintain police coverage at an acceptable level at certain times, and insofar as is reasonably practical a special conference is called in advance to discuss possible alternatives. (D) The schedule for each twenty-eight (28) day rotation shall be posted fourteen (14) days prior to the start of that rotation.

Related to SCHEDULING AND ROTATION

  • Felling and Bucking Felling shall be done to minimize breakage of Included Timber and dam- age to residual timber. Unless agreed otherwise, felling shall be done by saws or shears. Bucking shall be done to permit removal of all minimum pieces set forth in A2. B6.411 Felling in Clearings. Insofar as ground conditions, tree lean, and shape of clearings per- mit, trees shall be felled so that their tops do not extend outside Clearcutting Units, construction clearings, and ar- eas of regeneration cutting. B6.000 Xxxxx Xxxxxxx. Stumps shall not exceed, on the side adjacent to the highest ground, the maximum heights set forth in A6, except that occasional stumps of greater heights are acceptable when Purchaser determines that they are necessary for safe and efficient conduct of logging. Unless otherwise agreed, Purchaser shall re-cut high stumps so they will not exceed heights specified in A6 and shall dispose of severed portions in the same manner as other logging debris. The xxxxx heights shown in A6 were selected with the objective of maximum reasonable utilization of the timber, unless Sale Area Map shows special areas where xxxxx heights are lower for aesthetic, land treatment, or silvicultural rea- sons.

  • Packing and Marking By supplier

  • Training and Support Licensor shall offer installation support to the Licensee and each of the Members, including assisting with the implementation of any Licensor software. Licensor will provide appropriate training to Licensee and Member staff relating to the use of the Licensed Materials and any Licensor software. Licensor will offer reasonable levels of continuing support to assist Licensee and Members in use of the Licensed Materials, including providing help files and other appropriate user documentation in connection with the use of and access to Licensed Materials. Licensor will, at a minimum, make its personnel available by email, telephone or via the Web, or in person during Licensor’s regular business hours, Monday through Friday, for training and user access support.

  • Ordering and Maintenance CBB shall use Verizon’s electronic Operations Support System access platforms to submit Orders and requests for maintenance and repair of Services, and to engage in other pre-ordering, ordering, provisioning, maintenance and repair transactions. If Verizon has not yet deployed an electronic capability for CBB to perform a pre-ordering, ordering, provisioning, maintenance or repair, transaction offered by Verizon, CBB shall use such other processes as Verizon has made available for performing such transaction (including, but not limited, to submission of Orders by telephonic facsimile transmission and placing trouble reports by voice telephone transmission).

  • CUTTING AND PATCHING The Contractor shall be responsible for cutting, fitting or patching required to complete the Work or to make its parts fit together properly.

  • Monitoring and Review The Provider agrees to allow access to the Department for purposes of monitoring and review. This access includes but is not limited to client records, fiscal records, staffing records, policy and procedural manuals, facilities, staff, and children in care of the Department. The Department will conduct quality reviews, which may include site-based quality review visits.

  • Ordering and Provisioning 49.3.1 CenturyLink will provide necessary ordering and provisioning business process support as well as those technical and systems interfaces as may be required to enable CLEC to provide resale services, including the functions, features, and capabilities of such services, and Unbundled Network Elements. If CenturyLink deploys any enhanced electronic capability CenturyLink will notify CLEC of availability and CLEC shall use the processes for performing transaction(s) to the extent practicable and the use of any other interface or process will be discontinued. 49.3.2 The Parties agree that orders for services under this Agreement will not be submitted or accepted until after the completion of all account establishment activities, including but not limited to, the documents and information subscribed in Section 42.1, unless the Parties mutually agree upon a different date based on the specific circumstances of the Parties’ relationship. 49.3.3 Except as specifically provided otherwise in this Agreement, pre- ordering, ordering and provisioning of resold services shall be governed in accordance with CenturyLink’s Standard Practices. 49.3.4 CenturyLink will provide provisioning intervals and procedures for design and complex services on a nondiscriminatory basis. Complex Service Order charges pursuant to Tariff terms may apply. 49.3.5 Where Technically Feasible, the NEAC will coordinate support for all designed and/or complex services provided to CLEC. 49.3.6 To the extent required by Applicable Law, and upon request from CLEC, employing CenturyLink’s LSR, CenturyLink will provide blocking of 700, 900, and 976 services, or other services of similar type as may now exist or be developed in the future, and shall provide Billed Number Screening (BNS), including required LIDB updates, or equivalent service for blocking completion of bill-to-third party and collect calls, on a line, PBX, or individual service basis. Blocking shall be provided to the extent (a) it is an available option for the Telecommunications Service resold by CLEC, or (b) it is Technically Feasible when requested by CLEC as a function of Unbundled Network Elements. 49.3.7 When ordering a resale service via an LSR Service Order, CLEC may order separate interLATA and IintraLATA service providers (i.e., two PICs) on a line or trunk basis, and CLEC agrees to pay the applicable Service Order and PIC charges associated with such order. CenturyLink will accept PIC change orders for IntraLATA toll and long distance services through the service provisioning process. 49.3.8 The standard Service Order charges as listed in the Table 1 of this Agreement shall apply to all orders.

  • Training and Promotion a. The contractor will assist in locating, qualifying, and increasing the skills of minorities and women who are applicants for employment or current employees. Such efforts should be aimed at developing full journey level status employees in the type of trade or job classification involved. b. Consistent with the contractor's work force requirements and as permissible under Federal and State regulations, the contractor shall make full use of training programs, i.e., apprenticeship, and on-the-job training programs for the geographical area of contract performance. In the event a special provision for training is provided under this contract, this subparagraph will be superseded as indicated in the special provision. The contracting agency may reserve training positions for persons who receive welfare assistance in accordance with 23 U.S.C. 140(a). c. The contractor will advise employees and applicants for employment of available training programs and entrance requirements for each. d. The contractor will periodically review the training and promotion potential of employees who are minorities and women and will encourage eligible employees to apply for such training and promotion.

  • Archiving and Reuse Self-Archiving: The Publisher permits the Rights Holder to archive the Contribution in accordance with the Publisher's guidelines, the current version of which is set out in the Appendix "Author's Self-Archiving Guidelines".

  • Advertising and Marketing The Parties agree not to use the name of the other Party or make any reference to the other Party without the prior written consent of the other Party (which may be via email) in any advertising or marketing materials. Any proposed use of the name of a Party must be submitted in writing for agreement and prior approval. The Parties may elect to collaborate to prepare pre-approved marketing for the Aggregator or for the Competitive Supplier to utilize during the Term of this ESA without approval for each usage.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!