CONTRACTOR’S GENERAL OBLIGATIONS. 3.1 Contractor shall carry out all its obligations under the Contract with all due care and diligence, in a good and workmanlike manner and in accordance with good industry practice for the provision of comparable Goods/Services, without delays, and in conformity in all respects with the terms and conditions of the Contract.
3.2 Contractor represents and warrants that it possesses the skills, expertise, organisation, personnel, equipment and all other necessary attributes to carry out the Work timely, diligently and in accordance with good industry practice.
3.3 Contractor personnel shall, for the Work which they are required to perform, be competent, properly qualified, skilled and experienced in accordance with good industry practice.
3.4 Contractor represents and warrants that the Goods/Services shall be in accordance with the Contract, new, free from defects, of good quality material and good workmanship and fit for its or their intended purpose as set out in the Contract or if no purpose is specified, for its or their ordinary purpose, and conform in all respects with the Contract and specifications supplied or advised by Company to Contractor, if any.
3.5 Contractor shall afford Company reasonable access and opportunity to inspect the Work as it proceeds and, to the extent relevant, to perform any of Company’s obligations in relation thereto.
3.6 Contractor shall obtain at its own risk and expense, all permits, licences, registrations, certificates or other administrative authorisations required by any governmental authority in order to comply with its obligations under the Contract.
3.7 Contractor shall act as an independent contractor and neither Contractor nor Contractor Group personnel shall be deemed to be employees of Company Group.
3.8 On completion of the Services, if applicable, Contractor shall leave the worksite clean and tidy, remove all its equipment, appliances, tools and surplus material and clear away all rubbish occasioned by the operations throughout the Services in accordance with Applicable Law.
CONTRACTOR’S GENERAL OBLIGATIONS. 8.1 The Contractor shall ensure that:
(a) the Goods and Services (where applicable) conform in all respects with the Contract and, where applicable, with any samples approved by the Institution;
(b) the Goods operate in accordance with the relevant manufacturer’s or technical specifications provided by the Contractor;
(c) where applicable, the Contractor and Goods comply with the Institution’s IT requirements and any relevant requirements in relation to cybersecurity risks if the Goods require connection to any of the Institution’s electronic medical records, any of the Institution’s systems and/or connection with the internet, that is/are made known to the Contractor;
(d) the Goods supplied shall conform in all respects to the specifications set out in the relevant Orders and the Contract, and shall be tropicalised and capable of continuous, trouble-free and efficient operation in the ambient non-air-conditioned environment of Singapore; and
(e) the Goods are free from defects, patent or latent, in design, materials and workmanship and are fit and sufficient for all the purposes for which such Goods are ordinarily used and for any particular purpose made known to the Contractor by the Institution, and shall meet the standard of satisfactory quality, as the same is provided in the Sale of Goods Act (Cap. 393). The Contractor hereby also acknowledges that it is aware of the purposes for which the Goods are intended.
8.2 Where the Goods supplied to the Institution are intended or designed for surgical use, human consumption, ingestion, injection or any other use involving contact with, insertion into or application to the human body, such Goods must be packaged and delivered to the Institution in good, safe, sterile and clean condition and otherwise suitable and safe for such use, and in compliance with all legal, regulatory and safety requirements, as well as all relevant industry standards (including the Guidance Notes on Good Distribution Practice, where applicable), for the period required by the Institution. Where instructions and training for safe handling and storage of the Goods are required, they must be provided.
8.3 If a particular mode or means of containment is required for the storage of the Goods, the Contractor shall at its own expense provide the Institution with the means to so store the Goods, and such instructions and training as may be necessary for the Goods to be properly stored in full compliance with all legal, regulatory and safety ...
CONTRACTOR’S GENERAL OBLIGATIONS. The Contractor shall design, execute and complete the Works and shall remedy any defects, including:
(a) designing, manufacturing, constructing the Equipment;
(b) transporting, delivering and off loading the Goods and the Equipment on Site;
(c) erecting, assembling, installing in the final working position, testing and commissioning the Equipment;
(d) providing operating and maintenance manuals as specified in Employer’s Requirements
(e) providing training as specified in Employer’s Requirements, in accordance with Good Industry Practice and in accordance with the Contract. When completed, the Works shall be fit for the purposes for which the Works are intended and comply with the performance and other criteria as defined in the Contract. Forthwith upon the date stated in a Notice to Proceed, the Contractor shall proceed promptly, diligently and efficiently with the design, execution and completion of the Works. The Contractor shall provide the Plant and Contractor’s Documents specified in the Contract, and all Contractor’s Personnel, Goods, consumables and other things and services, whether of a temporary or permanent nature, required in and for the design, execution and completion of the Works and the remedying of defects. The Works shall include any work which is necessary to satisfy the Employer's Requirements, Contractor's Specification and Schedules, or is implied by the Contract, and all works which (although not mentioned in the Contract) are necessary for stability or for the completion, or safe and proper operation, of the Works. The Contractor shall be responsible for the adequacy, stability and safety of all Site operations, of all methods of construction and of all the Works.
CONTRACTOR’S GENERAL OBLIGATIONS. 4.1 The CONTRACTOR shall provide all management, supervision, personnel, materials and equipment (except materials and equipment specified in this CONTRACT to be provided by the COMPANY), plant, consumables, facilities and all other things whether of a temporary or permanent nature, so far as the necessity for providing the same is specified in or reasonably to be inferred from the CONTRACT and/or is required for the full and proper performance of the WORK and/or the CONTRACTOR’s obligations under the CONTRACT.
4.2 The CONTRACTOR warrants that it shall, at its cost:
(a) carry out all of its obligations under the CONTRACT and execute the WORK in a timely manner, with all due care and diligence and with the skill to be expected of a reputable contractor experienced in the types of work to be carried out under the CONTRACT and shall ensure that the WORK shall be fit for the purposes specified in the CONTRACT;
(b) comply with all reasonable instructions issued by the COMPANY in respect of the coordination, integration and interface of the WORK and the CONTRACTOR's performance of its obligations under this CONTRACT with any other goods, works and/or services relating to the PROJECT;
(c) use all reasonable endeavours to ensure that no delay, interruption or interference is caused by the CONTRACTOR to the COMPANY, the COMPANY's other contractors, consultants, advisors and/or any other person or party that the COMPANY may identify to the CONTRACTOR from time to time in relation to the WORK and performance of the CONTRACTOR's obligations under this CONTRACT; and
(d) report to the COMPANY at monthly or such other intervals as the COMPANY may reasonably require in relation to the WORK and the CONTRACTOR's performance of its obligations under this CONTRACT (which shall include providing the COMPANY with any calculations, details, drawings, manuals, specifications, layouts and other documents and information relating to the WORK and performance of the CONTRACTOR's obligations under this CONTRACT as the COMPANY may reasonably require).
CONTRACTOR’S GENERAL OBLIGATIONS. The Contractor shall design, execute and complete the Works and shall remedy any defects, including:
(a) designing, manufacturing, constructing the Equipment;
(b) transporting, delivering and off loading the Goods and the Equipment on Site;
(c) erecting, assembling, installing in the final working position, testing and commissioning the Equipment;
(d) providing operating and maintenance manuals as specified in Employer’s Requirements
(e) providing training as specified in Employer’s Requirements, in accordance with Good Industry Practice and in accordance with the Contract. When completed, the Works shall comply with the performance and other criteria as defined in the Contract. Forthwith upon the date stated in a Notice to Proceed, the Contractor shall proceed promptly, diligently and efficiently with the design, execution and completion of the Works. The Contractor shall provide the Plant and Contractor’s Documents specified in the Contract, and all Contractor’s Personnel, Goods, consumables and other things and services, whether of a temporary or permanent nature, required in and for the design, execution and completion of the Works and the remedying of defects. The Works shall include any work which is necessary to satisfy the Employer's Requirements, Contractor's Specification and Schedules, or is implied by the Contract, and all works which (although not mentioned in the Contract) are necessary for stability or for the completion, or safe and proper operation, of the Works. The Contractor shall be responsible for the adequacy, stability and safety of all Site operations, of all methods of construction and of all the Works.
CONTRACTOR’S GENERAL OBLIGATIONS. 7.1. The Contractor shall, with due care and diligence, and in accordance with the provisions of the Contract, design the Works to the extent stated in the Contract, and execute, complete and remedy any defects in the Works. The Contractor shall provide all superintendence, personnel, materials, plant, equipment and all other items, whether of a temporary or permanent nature, required for the design, execution and completion of Works, and for remedying any defects, in so far as is specified in, or can be reasonably inferred from, the Contract. The Contractor shall take full responsibility for the adequacy, stability and safety of all operations and methods of construction under the Contract.
7.2. The Contractor shall comply fully with any administrative orders given to him by the Engineer and shall ensure that the specifications and administrative orders are adhered to by his own employees and by his sub-contractors and their employees.
CONTRACTOR’S GENERAL OBLIGATIONS. RESPONSIBILITIES 6.
CONTRACTOR’S GENERAL OBLIGATIONS. 11.2.1 The Contractor shall provide all the necessary funds, equipment, facilities and materials required for the performance of the Hydrocarbons Operations. It shall also supply all the technical expertise, including the use of the foreign personnel required for the performance of the Work Programmes. The Contractor shall be responsible for the preparation and implementation of the Work Programmes which shall be performed in the most appropriate way in accordance with Article 9 of this Contract and Good International Petroleum Industry Practice.
11.2.2 The Contractor shall conduct the Hydrocarbons Operations provided under this Contract diligently and in accordance with laws and regulations applicable in the Republic and with Good International Petroleum Industry Practice.
11.2.3 All works and facilities erected by the Contractor hereunder shall, according to their nature and to the circumstances, be built, placed, signalled, marked, fitted and preserved so as to allow at any time and in safety free passage to navigation, and without prejudice to the foregoing, the Contractor shall, in order to facilitate navigation, install the sound and optical devices approved or required by the competent authorities and Good International Petroleum Industry Practice and maintain them in a manner satisfactory to said authorities.
11.2.4 Upon request of the Contractor to the Minister, the Republic will establish in line with applicable legislation, reasonable safety zones surrounding the facilities constructed and used by the Contractor in the conduct of the Hydrocarbons Operations and shall take all reasonable precautions to prohibit within the zones in question the entry of vehicles, vessels or persons, or the conduct of activities or the construction of structures presenting a safety risk or potentially interfering with the Hydrocarbons Operations.
11.2.5 In the exercise of its rights to build, carry out work and maintain all facilities necessary for the purposes hereof, the Contractor shall not disturb any existing graveyard or building used for religious purposes, or cause a nuisance to any government or public building, except with the prior written consent of the Minister, and shall make good the damage caused by it in that event.
11.2.6 With the goal of achieving safe and reliable operations, the Contractor shall in the conduct of Hydrocarbons Operations establish and implement health and safety management plans in accordance with Applicable Environmental Legisl...
CONTRACTOR’S GENERAL OBLIGATIONS. The Contractor shall complete the ISBL Design, procure, construct, commission, manage, execute and complete the Works in accordance with the Contract, and shall remedy any defects in the Works. When completed, the Works shall be fit for the purposes for which the Works are intended as defined in the Contract. The Contractor shall provide the Plant and Contractor's Documents specified in the Contract, and all Contractor's Personnel, Goods, consumables and other things and services, whether of a temporary or permanent nature, required in and for this ISBL design, execution, completion and remedying of defects. The Works shall include any work implied by the Contract, and all works which (although not mentioned in the Contract) are necessary for stability or for the completion, or safe and proper operation, of the Works. The Contractor shall be responsible for the adequacy, stability and safety of all Work Site operations, of all methods of construction and of all the Works. The Contractor shall, whenever required by the Contract Awarder, submit details of the arrangements and methods which the Contractor proposes to adopt for the execution of the Works. No significant alteration to these arrangements and methods shall be made without this having previously been notified to the Contract Awarder.
CONTRACTOR’S GENERAL OBLIGATIONS. 5.1 Contractor shall provide all management, engineering, design, supervision, personnel, equipment, plant, machinery, tools, apparatus, hardware, materials, consumables, supplies, containers, packaging, fastenings, spare parts, software, facilities, premises and all other things whether of a temporary or permanent nature, so far as the necessity for providing the same is specified in or reasonably to be inferred from this MSA.
5.2 Contractor shall carry out the Work: (a) in accordance with internationally recognised good practices and standards applicable to work of the type to be carried out under this MSA; (b) with all due skill, care, diligence, prudence and foresight to be expected of a reputable contractor experienced in work of the type to be carried out under this MSA; (c) to the satisfaction of Company; and (d) in compliance with all other provisions of this MSA
5.3 In order to ensure the performance and completion of the Work is not delayed, Contractor shall be responsible for: (a) the diligent and timely execution of all aspects of the Work, in accordance with the provisions of this MSA; (b) the diligent and timely request from Company of all items to be provided by Company, including Company Provided Items; and (c) subject to the programming requirements of Company, programming the Work and independently controlling its progress, including preparing and submitting to Company estimates, programmes, reports of progress and other reports as Company may request from time to time.
5.4 Except to the extent that it may be legally impossible or create a hazard to safety, Contractor shall comply with Company’s instructions and directions on all matters relating to the Work.
5.5 Contractor shall ensure that other work it is currently or simultaneously carrying out does not interfere with the Work. In respect of Personnel, Equipment, securings, containers, packaging, software, facilities, premises and all other things whether of a temporary or permanent nature that Contractor is required to provide in accordance with the provisions of this MSA, Contractor shall not enter into any agreement of any nature if the work under such agreement is for a period of time that would result in any of the same not being available as and when required under this MSA, shall not at any time divert or allocate the same to other work without Company’s prior approval and undertakes that, notwithstanding such approval, the same shall be provided as and when required under this...
