Management Engineering Services Sample Clauses

Management Engineering Services. The consultant agrees to provide management engineering services required for the execution of the work. These services shall include, but are not limited to the following: 1. Check construction activities to obtain compliance with plans and specifications. 2. Provide interpretation of plans and specifications. 3. Supervise and coordinate sub-consultant contracts for field inspection and testing. 4. Review shop drawings and certificates submitted by contractors for compliance with design concepts. 5. Review all final pay estimates and explanation of variation between contract and final quantities prepared by resident engineer. 6. Review weekly progress reports as prepared by resident engineer. 7. Review “Contractors Request for Extension of Contract Time” analysis made by the resident engineer and make recommendation to the owner. 8. Prepare and recommend approval of change orders. 9. Meet with the owner for consultation and advice during construction. 10. Schedule final inspection of all contracts and send notifications. Attend final inspection of construction. Make recommendations for acceptance of work. 11. Monitor that all testing required by the specifications is performed. Review and approve all materials reports prepared by the resident engineer. 12. Certify that all project work completed under inspection of the resident engineer is in substantial compliance with the plans, specifications and contract documents including any modifications by change order or otherwise, that all required tests were performed, and that such work is recommended for acceptance. 13. Maintain record drawings from redline or working drawings prepared by resident engineer as accumulated during the course of construction to show “as-built” conditions.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Management Engineering Services. The CONSULTANT shall perform the management engineering services necessary to verify that proper coordination of the activities of all parties involved in accomplishing completion of the projects is achieved; to maintain complete, accurate records of all activities and events relating to the projects; to properly document the significant changes to the projects; to provide interpretations of the plans, specifications and contract provisions; to make recommendations to the AUTHORITY to resolve disputes which arise in relation to the construction contracts; and to maintain an adequate level of surveillance of the contractor's activities. The CONSULTANT shall also perform any other management engineering services normally assigned to a Resident Engineer that are required to fulfill its responsibilities under the Agreement. All records and documentation will be in accordance with standard procedures, format and content, and the policies and procedures of the AUTHORITY. Services include, but are not limited to the following: 1. At the direction of the AUTHORITY, schedule and conduct a preconstruction conference for each project. Record significant information and decisions made at this conference and distribute copies of these minutes to the appropriate parties. 2. Maintain project files in accordance with the AUTHORITY's methods and utilizing the AUTHORITY's filing system. 3. Receive, review, and recommend acceptance by the Authority of the Contractor's Project Construction Schedule, prepared and submitted in accordance with the Contract Documents. 4. Maintain, on a daily basis, a complete and accurate record of the activities and events relating to the project and a record of the work completed by the contractor, including quantities of pay items in conformity with final estimate preparation procedures and specifications. The CONSULTANT shall immediately report apparent, significant changes in quantity, time, or cost as they are noted. 5. Maintain a roadway and bridge construction diary, including weather. 6. Maintain a log of all materials entering into the work with proper indication of the basis of acceptance of each shipment of material. 7. Maintain records of all sampling and testing accomplished and analyze such records as required to ascertain acceptability of materials and completed work items. Reports for records of work and testing results shall be maintained in the CONSULTANT's files for each individual project. 8. Once each month, prepare a compre...
Sample 1Sample 2
Management Engineering Services. The CONSULTANT shall perform all management engineering services necessary to: assure proper coordination of activities of all parties involved in accomplishing completion of projects; maintain complete, accurate records of all activities and events relating to projects; properly document all significant changes to projects; provide interpretations of plans, specifications and contract provisions; make recommendations to the STATE/CITY/COUNTY to resolve disputes that may arise in relation to construction contracts; and to maintain an adequate level of surveillance of Contractor's activities. The CONSULTANT shall perform any other management engineering services normally assigned to a project that are required to fulfill the CONSULTANT’S responsibilities under this AGREEMENT. All recordation and documentation shall be in accordance with standard ALDOT procedures, formats and content. CONSULTANT services include, but are not limited to the following: 1. Attending and participating in a pre-construction conference for each project. Record significant information revealed and decisions made at conference and if requested by the STATE/CITY/COUNTY, distribute copies of said minutes to appropriate parties. The CONSULTANT may be required to conduct the pre-construction conference. 2. Complete and maintain a full and accurate daily record of all activities and events relating to project. Record all work completed by Contractor, including quantities of pay items in conformity with Final Estimates preparation procedures and specifications. The CONSULTANT shall immediately report to Division Engineer/City Engineer/County Engineer changes in pay items, project time or cost as soon as they become known to the CONSULTANT. 3. Complete and maintain Project Diaries and Inspector's Daily Reports as requested by the STATE. Said diaries and reports shall be kept up-to-date on a daily basis. 4. Maintain a project log of all materials entering into work with proper indication of basis of acceptance for each shipment of material. 5. Maintain project records of all sampling and testing accomplished. Analyze such records to ascertain acceptability of materials and completed work items. The field reports shall be recorded in project records within three days. The CONSULTANT shall verify, certify and document work items requiring performance periods (curing period, operational period, etc.). 6. Prepare and submit monthly to Division Engineer/City Engineer/County Engineer a comprehens...
Sample 1
Management Engineering Services. The CONSULTANT shall perform all management engineering services necessary to: assure proper coordination of activities of all parties involved in accomplishing completion of projects; maintain complete, accurate records of all activities and events relating to projects; properly document all significant changes to projects; provide interpretations of plans, specifications and contract provisions; make recommendations to the STATE to resolve disputes that may arise in relation to construction contracts; and to maintain an adequate level of surveillance of the Contractor's activities. The CONSULTANT shall perform any other management engineering services normally assigned to a project that are required to fulfill the CONSULTANT’S responsibilities under this AGREEMENT. All recordation and documentation shall be in accordance with standard ALDOT procedures, formats and content. CONSULTANT services include, but are not limited to the following: 1. Attending and participating in a pre-construction conference for each project. Record significant information revealed and decisions made at conference and if requested by the STATE, distribute copies of said minutes to appropriate parties. The CONSULTANT may be required to conduct the pre-construction conference. 2. Complete and maintain a full and accurate daily record of all activities and events relating to project. Record all work completed by the Contractor, including quantities of pay items in conformity with the Construction Manual, Construction Information Memorandums, and CAMMS Policies and Procedures. The CONSULTANT shall immediately report to the Region Engineer changes in pay items, project time or cost as soon as they become known to the CONSULTANT. 3. Complete and maintain Project Diaries and Inspector's Daily Reports as requested by the STATE. Said diaries and reports shall be kept up-
Sample 1

Related to Management Engineering Services

  • Engineering Services Definition: Engineering Services includes any service or creative work, the adequate performance of which requires education, training and experience in the application of special knowledge in consulting, investigating, evaluating, planning and designing, engineering principles. Engineering Services covered by the Xxxxxx Architect-Engineers Act (40 U.S.C. 1102) are not covered in the primary scope of OASIS SB. Examples: Service areas that are included under the Engineering Services discipline include, but are not limited to the following: 1. Systems Engineering 2. Advanced Technology Pilots and Trials 3. Alternative Energy Sources and Engineering 4. Configuration Management 5. Concept Development

  • Monitoring Services IDT staff shall, using methods that include face-to-face and other contacts with the member, monitor the services a member receives. This monitoring shall ensure that: a. The member receives the services and supports authorized, arranged for and coordinated by the IDT staff; b. The services and supports identified in the MCP as being provided by natural and community supports are being provided; and c. The quality of the services and supports received is adequate and still necessary to continue to meet the needs and preferences of the member and support the member’s outcomes identified in the MCP.

  • Geotechnical Engineer « »« » « » « » « » « »

  • PROJECT SERVICES Landlord shall furnish services as follows:

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. (a) A7 to show Purchaser’s performance responsibility. (b) The Schedule of Items to include costs of survey and design, as provided under B5.24, and adjust Timber Sale Account, as provided in B5.

  • Training Services Training Services may include pre-packaged training Products, and/or the development or customization of training programs as requested, including Live Training, Computer Based/Multi-Media Training which encompasses Internet-Delivered Training, and/or Video Based Training.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

  • Laboratory Services Covered Services include prescribed diagnostic clinical and anatomic pathological laboratory services and materials when authorized by a Member's PCP and HPN’s Managed Care Program.

  • Construction Services 4,500 thousand SDR for Japan Post in Group A 15,000 thousand SDR for all other entities in Group A 4,500 thousand SDR for entities in Group B Architectural, engineering and other technical services covered by this Agreement: 450 thousand SDR

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!